You still have to “smooth” even if you choose fwhm=0 to project the data in the fsaverage space. 

So if I were you I would start with fwhm=5mm, check in the qdec console what is the final fwhm of your data (or check the fwhm.dat in the glmdir folder), and if you thinks it’s too high (I’d say >20mm), then go for fwhm=0mm, which should solve the problem.

But the ideal if 5mm is too high is to smooth still a bit, by 1 or 2mm, if you are ok to go without qdec.



On 16 Mar 2016, at 11:13, Pedro Rosa <pedrogomesrosa@gmail.com> wrote:

Thanks for que quick answer, Marie.
If I got right, I should either not smooth it after mri_preproc (no mri_surf2surf) or do it with kernels < 5mm, and that should make to FMHM fall below 30. Am I correct?
Thanks,
Pedro.

On Wed, Mar 16, 2016 at 3:03 PM, Marie Schaer <Marie.Schaer@unige.ch> wrote:

Hi Pedro,

So lGI is inherently very smoothed, and you don’t want to over smooth (which is why you get this error), so I usually recommend either no smoothing (fwhm=0) or fwhm=5mm, given that these are the options easily inputed in qdec. I’d say try first with 5mm, and check if this work, if it doesn't decrease to 0mm. And if you want then to work around, you can tune your smoothing with values in between to achieve a smoothness level of 15mm, most often with 1 or 2mm, but qdec won’t accept it so you’ll have to go for the commandline stats.

Hope it helps,

Marie





> On 16 Mar 2016, at 10:50, Pedro Rosa <pedrogomesrosa@gmail.com> wrote:
>
> Dear FreeSurfers,
> I am running a localgi analysis using mri_glmfit and mri_glmfit-sim, and it seems the last script looked for freesurfer/average/mult-comp-cor/fsaverage/?h/cortex/fwhm40/abs/th13/mc-z.cdf and mc-z.csd, but there are precached data until fmhm30.
> How should I proceed?
> Best,
> Pedro.
> _______________________________________________
> Freesurfer mailing list
> Freesurfer@nmr.mgh.harvard.edu
> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
>
>
> The information in this e-mail is intended only for the person to whom it is
> addressed. If you believe this e-mail was sent to you in error and the e-mail
> contains patient information, please contact the Partners Compliance HelpLine at
> http://www.partners.org/complianceline . If the e-mail was sent to you in error
> but does not contain patient information, please contact the sender and properly
> dispose of the e-mail.


_______________________________________________
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer

_______________________________________________
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer


The information in this e-mail is intended only for the person to whom it is
addressed. If you believe this e-mail was sent to you in error and the e-mail
contains patient information, please contact the Partners Compliance HelpLine at
http://www.partners.org/complianceline . If the e-mail was sent to you in error
but does not contain patient information, please contact the sender and properly
dispose of the e-mail.