Freesurfer

freesurfer@nmr.mgh.harvard.edu

15 participants
30064 discussions

Fw:errors with running recon-all -autorecon1
by 张思敏 29 Mar '23

29 Mar '23

External Email - Use Caution TO: freesurfer(a)nmr.mgh.harvard.edu FROM: 1913191(a)mail.nankai.edu.cn SUBJECT: recon-all -autorecon1 error: talairach_afd: Talairach Transform: transforms/talairach.xfm ***FAILED*** (p=0.0000, pval=0.0000 < threshold=0.0050) Hello FreeSurfer Developers, I'm trying to run the command: recon-all -subjid <subname> -autorecon1. I'm getting the an error message and the error log reads as follows: error: talairach_afd: Talairach Transform: transforms/talairach.xfm ***FAILED*** (p=0.0000, pval=0.0000 < threshold=0.0050) Then I run the command: recon-all -subjid <subname> -autorecon1. I get the same error as before. Finally, I run the command: tkregister2 --s subjid --fstal. But I am new to Freesurfer so I can't get the meaning of the output after running that command. How do I know if this is true？I‘ve attached the tkregister2.png and the recon-all.log in case it's of any use. 1) FreeSurfer version: freesurfer-darwin-macOS-7.2.0 2) Platform: MacOS release 10.15.7 (Catalina) 3) uname -a: Darwin zsilencedeMacBook-Pro.local 19.6.0 Darwin Kernel Version 19.6.0: Mon Aug 31 22:12:52 PDT 2020; root:xnu-6153.141.2~1/RELEASE_X86_64 x86_644) recon-all.log: see attached 5) tkregister2.png: see attached Thanks.

1 0

Autrecon-pial command
by Carlos Alcocer 29 Mar '23

29 Mar '23

External Email - Use Caution Hello all, Does -autorecon-pial flag also recreate the statistics tables with the new surfaces? or do you have to run autorecon3 after to recalculate stats files? Tks, Carlos

2 1

Longitudinal processing of single time point data
by Hemond, Christopher 29 Mar '23

29 Mar '23

External Email - Use Caution Dear Freesurfer experts, I am processing longitudinal data from subjects participating in a pre-post analysis; a few subjects do not have follow-up data. I'd like to still include these subjects and plan on using mixed effects analysis methods given the unbalanced data. I am following the wiki tutorials in this regard (specifically https://secure-web.cisco.com/1YHlXw74PCpQ3T6qawqkxxMCM_VcHyTlbf-HZnuBTtb68u…) which suggests that subjects having a single time point should be processed in the longitudinal pipeline to reduce bias (from Bernal-Rusiel 2013). From the webpage: "Single time-point subjects: Because of drop-outs it can happen that some individuals were scanned only at a single time point. Instead of removing this valuable information, it is possible (e.g. in the linear mixed effects models LME) to include this data. For that it, however, becomes necessary to run the single time points through the longitudinal stream, to ensure that also those images undergo the same processing steps. This can be done by simply passing a single time point in the base creation step" On a single-timepoint subject I ran: "recon-all -base <subject_base> -tp <baseline_timepoint> -all However I get the following error: ERROR: It appears that the -base templateID that you passed: -base <subject_base> is an existing regular (cross sectional) run! Please make sure you pass a new name (not one of the time points) for the template with -base. I've searched the archive but didn't find anything with this. Maybe I am doing something obviously wrong! Any help you could provide would be greatly appreciated. I'm running freesurfer-darwin-macOS-7.3.2-20220804-6354275. Many thanks, Chris <https://secure-web.cisco.com/1YHlXw74PCpQ3T6qawqkxxMCM_VcHyTlbf-HZnuBTtb68u…> The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

2 1

How to extract hippocampus from nu.mgz using lh.hippoSfLabels-T1.v10.FSvoxelSpace.mgz
by Hoang Gia Minh 29 Mar '23

29 Mar '23

External Email - Use Caution Dear experts, I am doing a Hippocampus segmentation task using Freesurfer. After I run the command: recon-all -i sub-ADNI002S0295_ses-M00_T1w.nii.gz -s S1 -hippocampal-subfields-T1 -all -openmp 80 in which sub-ADNI002S0295_ses-M00_T1w.nii.gz is my input MRI scan I received an MRI folder that included "nu.mgz, aseg.mgz, etc." However, file "lh.hippoSfLabels-T1.v10.FSvoxelSpace.mgz" is just a mask or label file of the hippocampus. I want to extract the hippocampus from the original scan (nu.mgz or orig.mgz) using lh.hippoSfLabels-T1.v10.FSvoxelSpace.mgz. Is there any command or step that I can do? Thank you so much Best regards Minh -- *Hoang Gia Minh, MSc* *Research Assistant* Department of Biomedical Science and Engineering Gwangju Institute of Science and Technology (GIST) TEL: (+84)-38-521-3040 EMAIL: hoanggiaminh1996(a)gmail.com

3 2

HPC Usage - Moving On from CentOS7
by Horn, Mitchell Jacob 29 Mar '23

29 Mar '23

Hi Dev team, I just wanted to let the community know that as many HPC systems are moving on from CentOS7, to be very cognizant of the potential need to reprocess their dataset. My institution is moving to Alma and there was in fact a difference (attaching table). All recons were done with subject bert, all with 7.2.0, no flags. [cid:image001.png@01D960C3.8FAB7CD0] Best, Mitch

2 2

T2 Flair for GM/WM differentiation
by Michael Mc Laughlin 29 Mar '23

29 Mar '23

External Email - Use Caution Would it not be better if Freesurfer used T2 Flair MRI images for differentiation between grey matter and white matter than using T1, or at least using these as extra information. You can clearly see in these attached (inline) images that the contrast between GM and WM is better in the T2 image than the T1 [image: T2Flair.jpg] [image: T1SE.jpg] Michael McLaughlin, Dublin 18 Ireland

2 2

Manual of Freesurfer to Learn the Software from Zero to advanced Level
by Ahsan Ali 29 Mar '23

29 Mar '23

External Email - Use Caution Dear Sir, I've been learning Freesurfer software for a long time but still, I couldn't understand its basics and how a freesurfer actually works. I am always searching all the terms from the freesurfer web page but not getting exactly how it works. It will be a great help from your side for me if you can provide me the manual of freesurfer. Such as how the folders are generated and in each folder (ex. MRI folder-auto.mgz, aparc+aseg.mgz files) file is getting generated. Thank You. Regards, Ahsan

2 1

errors with running recon-all -autorecon1
by 张思敏 28 Mar '23

28 Mar '23

1 0

Samseg lesion mask holes
by Evie Neylon 28 Mar '23

28 Mar '23

External Email - Use Caution Dear experts, I am running SAMSEG to segment MS lesions from T2 FLAIR scans. I wanted to create a lesion mask in order to obtain lesion volumes and lesion counts, so I used mri_binarize on seg.mgz to obtain all voxels with the value 99. However, upon visualising this mask I see that there are holes in the mask in regions that are quite clearly lesions based on the FLAIR image. I see in seg.mgz that these voxels are instead assigned incorrectly to a different tissue, as the lateral ventricle, for example. I wondered if this misassignation of tissue was due to the chosen threshold (0.3) so I added the --save-probabilties flag to look at the probability maps too, and I see that actually the probability map thresholded at 0.3 does not contain holes. The probability map actually seems more accurate in general and picks up on more of the hyperintensities. This is important for my desired outputs (i.e. accurate lesion counts/volumes). So I wondered if it was possible to explain a little why these holes might be occurring in the final segmentation but not the probability map? Would it be incorrect to derive the lesion mask from the probability map instead? Apologies I cannot attach the images of the data. TIA, Evie

1 0

Re: [Freesurfer] UnicodeEncodeError while running the recon-all
by fsbuild 27 Mar '23

27 Mar '23

External Email - Use Caution Looks like python3 tries to write/process a string into a file when running the res-config script and fails to translate something to a utf-8 character. If your locale says you are using UTF-8, e.g., $ locale LANG="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_CTYPE="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_ALL= - then it should work to use this grep command to find files with non-UTF8 characters in them, e.g. $ grep -axvq '.*’ file.txt The -q will prevent displaying the non-utf8 characters which might screw up your terminal session. This thread gives some examples of when that error occurs and how to unmangle the string,https://secure-web.cisco.com/1K3cgYD2bSzKyvPVJ_FeWPCrJhQSWfAKprwIwga… - R. On Mar 27, 2023, at 22:14, David Lau <drlauci(a)gmail.com> wrote:        External Email - Use Caution        Hi,I tried to run Freesurfer (macOS-7.1.1) to the command line and the terminal replied, "DavidLaus-MacBook-Air:local davidlau$ recon-all -i /Users/davidlau/Desktop/testing/1RAS.nii -subject /Users/davidlau/Desktop/testing/$d doneTraceback (most recent call last):  File "/Users/davidlau/Documents/freesurfer/python/scripts/rca-config", line 143, in <module>    file.write(arg + '\n')UnicodeEncodeError: 'utf-8' codec can't encode character '\udcc3' in position 0: surrogates not allowedERROR: could not configure recon-all parameters"A similar question has been retrieved from the mail list (20 Jul 2020) by Molly and Andrew replied that there might be a non-unicode character accidentlly passed to the command line and recommended manually typing out the recon-all command. I've tried this several times but the same error message popped out. Any suggestions would be much appreciated.David_______________________________________________Freesurfer mailing listFreesurfer@nmr.mgh.harvard.eduhttps://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer