Freesurfer

freesurfer@nmr.mgh.harvard.edu

17 participants
30130 discussions

a small tkmedit issue
by Sebastian Moeller 04 Oct '05

04 Oct '05

Hi All, I recently tried to visualise the result of 10 mprage runs in one animal. Using the 20050921dev version of freesurfer (centos4_x86_64) mri_motion_correct2 went through smoothly. Since I scanned at 0.5mm^3 voxel size I unpacked the anatomicals into MGH instead of COR, trying to look at the result of the average result of the 10 scans at magnification of 2 resulted in funny looking artifacts. In the attached tiff file one can see two dorso-ventral edgers running through the slice, were the display seems to be off by some slices. Very prominent over the cerebellum where the blood vessels simply stop. I redid the unpacking and mri_motion_correct2 based averaging to produce SPM format output. This output produces the same artzefacts when view with tkmedit but looks okay when viewed with mricro. Please let me know, whether I can be of any help in this issue. Best Regards Sebastian -- Sebastian Moeller Tel.: 04 21 - 2 18 - 97 51 oder 90 95 Fax.: 04 21 - 2 18 - 90 04 GSM: 01 62 - 3 25 45 59 moeller(a)brain.uni-bremen.de AG Kreiter / FB 2 Institut fuer Hirnforschung III Abteilung Theoretische Neurobiologie Universitaet Bremen Biogarten Hochschulring 16a Postfach 33 04 40 28359 Bremen

1 0

reading Varian data files
by Renat Yakupov 03 Oct '05

03 Oct '05

Hi everybody, I have some data from a Varian 4T scanner. I tried mri_convert -it sdt on it, and it didn't work, complaining that it couldn't fine a header file. The data itself is in the following format: one big file, named "fid" which basically contains raw data, and an ASCI file name "procpar" which is like a header file. Does anybody have any experience with converting Varian data? Any suggestions what I could try to convert it? Thank you. Regards, Renat.

1 0

analyze to bshort
by Mark Williams 03 Oct '05

03 Oct '05

Hi, Is there any way to transform images in spm analyze format to bshort? Thanks Mark

2 3

matlab functions for reading sphere.reg files
by Darren Weber 03 Oct '05

03 Oct '05

Hi, are there any matlab functions for reading sphere.reg files? What is their format and content? Best, Darren -- Darren L. Weber, Ph.D. Postdoctoral Scholar Dynamic Neuroimaging Laboratory, Department of Radiology, University of California, San Francisco, 185 Berry Street, Suite 350, Box 0946, San Francisco, CA 94107, USA. Tel: +1 415 353-9444 Fax: +1 415 353-9421 www: http://dnl.ucsf.edu/users/dweber "To explicate the uses of the brain seems as difficult a task as to paint the soul, of which it is commonly said, that it understands all things but itself." --Thomas Willis (1664), The Anatomy of the Brain and Nerves.

3 4

control points
by Sasha Wolosin 03 Oct '05

03 Oct '05

Dear all, I am trying to add control points for a subject in order to improve normalization and skull stripping, but I found that the control points I added did not have much effect on the end result. I know control points should be added at points that the user feels sure are inside the white matter boundary, and that there should be about 20 spread out throughout the volume, but I am still uncertain as to how to choose them effectively. Should they be closer to the white/gray boundary? Or closer to the center? I believe I would be able to choose these points more effectively if I understood how FreeSurfer uses control points. Is it used as a high or low cut-off thresh-hold? Or is it more complex than that? Is location taken into account or is it just the intensity values that are used? Any help is greatly appreciated. Thank you, Sasha Sasha Wolosin Research Assistant Developmental Cognitive Neurology Kennedy Krieger Institute 707 N. Broadway Baltimore, MD 21205 ph: (443) 923-9270 wolosin(a)kennedykrieger.org Disclaimer: The materials in this e-mail are private and may contain Protected Health Information. Please note that e-mail is not necessarily confidential or secure. Your use of e-mail constitutes your acknowledgment of these confidentiality and security limitations. If you are not the intended recipient, be advised that any unauthorized use, disclosure, copying, distribution, or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender via telephone or return e-mail.

2 1

make_average_subject error?
by Brian Schweinsburg, Ph.D. 02 Oct '05

02 Oct '05

Hi Folks, I tried running the latest make_average_subject script (and the make_average_surface/volume scripts) using the expected command line syntax and after hitting enter it immediately exits to the csh without error, but does not produce anything. make_average_subject --subjects SC010 SC011 SC012 ... I am running the latested dev release with Fedora Core 4. Any ideas as to the problem? Brian

2 6

recon-all error
by Morgan Hough 02 Oct '05

02 Oct '05

I downloaded the latest freesurfer-dev and I was testing out my install with "recon-all -autorecon-all -subjid bert" and I am getting this error. mri_convert nu4.mnc nu.mgz mincRead(): can't find file /var/scratch11/mhough/subjects/bert/mri/nu4.mnc reading from nu4.mnc... ERROR: converting nu to COR/mgz The file certainly isn't there and I don't see anything in mri/norm if that is where it should be. Here's what there is: [mhough@dhania bert]$ find . -name "*.mnc" ./mri/tmp-mri_motion_correct2-32472/cor-1.mnc ./mri/tmp-mri_motion_correct2-32472/cor-2.mnc ./mri/tmp-mri_motion_correct2-32472/cor-3.mnc [mhough@dhania bert]$ which nu_correct /usr/local/freesurfer/lib/mni/bin/nu_correct Just to double check it wasn't something special about bert I created a new directory for my one subject that I want to process and I got the same error. Thanks in advance. Cheers, -Morgan -- Morgan G. Hough, DPhil Candidate University of Oxford, Centre for Functional MRI of the Brain (FMRIB) John Radcliffe Hospital, Headington, Oxford OX3 9DU, United Kingdom Tel: +44 (0) 1865 222545 / Fax: +44 (0) 1865 222717 e-mail: mhough(a)fmrib.ox.ac.uk / URL: http://www.fmrib.ox.ac.uk/~mhough

2 2

installation, Tcl_CreateInterp
by Darren Weber 29 Sep '05

29 Sep '05

I tried to install the latest dev version, but given all the bugs, I'm trying to revert to a prior version that was working. So, I removed the latest dev installation and reinstalled a prior version of freesurfer onto an FC3 linux system. I checked some setup issues and then ran csurf, which was fine, but tkmedit/tksurfer required tcltk 8.3, so I installed tcl8.3 and tk8.3 from rpm and then created symbolic links in /usr/lib: ln -s libtkx8.3.so libtk8.3.so ln -s libtclx8.3.so libtcl8.3.so Now tkmedit/tksurfer will startup, but they both complain about: tksurfer: symbol lookup error: tksurfer: undefined symbol: Tcl_CreateInterp I don't know how to handle this one. Any suggestions? Thanks, Darren -- Darren L. Weber, Ph.D. Postdoctoral Scholar Dynamic Neuroimaging Laboratory, Department of Radiology, University of California, San Francisco, 185 Berry Street, Suite 350, Box 0946, San Francisco, CA 94107, USA. Tel: +1 415 353-9444 Fax: +1 415 353-9421 www: http://dnl.ucsf.edu/users/dweber "To explicate the uses of the brain seems as difficult a task as to paint the soul, of which it is commonly said, that it understands all things but itself." --Thomas Willis (1664), The Anatomy of the Brain and Nerves.

1 0

MNI-derived perl scripts referencing /usr/pubsw/bin/perl
by Greg Harris 29 Sep '05

29 Sep '05

Dear FreeSurfer maintainers, When we download FreeSurfer and install it, we end up with files in ${FREESURFER_HOME}/lib/mni/bin that insist that perl be installed in /usr/pubsw/bin with script first lines as follows: autocrop:#! /usr/pubsw/bin/perl -w field2imp:#!/usr/pubsw/bin/perl -w imp2field:#!/usr/pubsw/bin/perl -w make_template:#!/usr/pubsw/bin/perl -w mritoself:#! /usr/pubsw/bin/perl -w mritotal:#! /usr/pubsw/bin/perl -w nu_correct:#!/usr/pubsw/bin/perl -w nu_estimate:#!/usr/pubsw/bin/perl -w nu_estimate_np_and_em:#!/usr/pubsw/bin/perl -w nu_evaluate:#!/usr/pubsw/bin/perl -w resample_labels:#!/usr/pubsw/bin/perl sharpen_volume:#!/usr/pubsw/bin/perl -w xfmtool:#! /usr/pubsw/bin/perl -w As it happens, our System Administration authority here is equally adamant that I should shout this complaint at you: "A LOT OF PEOPLE don't have /usr/pubsw at all." Of course, I know that these scripts come to you from Montreal Neurological Institute, and they TOLD you to tell all of us that /usr/pubsw is a REQUIREMENT so their scripts will not be sensitive to what version of perl is in use by any others here. Well, even so, it is our practice to change each of these files to replace '/usr/pubsw/bin' with something acceptable on our installation, '/usr/bin', every time we download an update. Perhaps, if these scripts are indeed version-specific, the specific version of perl that is required for Intel/Linux should be in the same ${FREESURFER_HOME}/lib/mni/bin directory and referenced as '#!./perl -w' in the MNI scripts. Or, what would you suggest instead? Greg Harris Iowa Psychiatry Brain Imaging Lab

2 1

frozen versions not working for recon-all after upgrade
by Elizabeth Fenstermacher 28 Sep '05

28 Sep '05

I've created a few frozen versions of the FreeSurferDev versions at various points and though they have been working without difficulty in the past I am now getting errors (seems to be difficulty finding tools) when I attempt to run the recon stream using them (though they are working to run other scripts I use without error). The command that I'm using also seems to be executing fine from the current dev version. I have saved the output I get from both frozen versions to ~efenster/scratch/fsfreeze-reconoutput (frozen version created on 5/25/05) and ~efenster/scratch/fsfrozen-reconoutput (frozen version created on 9/6/05) I am really not sure what could be causing these new difficulties and would greatly appreciate help. Thanks Eliz

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer