Freesurfer

freesurfer@nmr.mgh.harvard.edu

6 participants
30055 discussions

Freeview crash
by Tietze, Anna 03 Jan '25

03 Jan '25

Hi, When I want to open files with freeview, it crashes immediately. I tried my own recon-all output and the bert dataset. Can you help me? Operating system: Mac, Sonoma 14.7.1 Fressurfer version 7.4.0 XQuatz 2.8.5 licence.txt located in: /Applications/freesurfer/7.4.0/license.txt (can be read, as recon-all works) environment is set by FREESURFER_HOME=/Applications/freesurfer/7.4.0 and source $FREESURFER_HOME/SetUpFreeSurfer.sh When I run the command freeview, the following message is given: /Applications/freesurfer/7.4.0/bin/freeview: line 2: 6615 Segmentation fault: 11 $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" Or trying to open a file: freeview -v /Users/annatietze/Documents/freesurfer/freesurfer_subjects/nini_ra/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2: 6765 Segmentation fault: 11 $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" freeview -v /Applications/freesurfer/7.4.0/subjects/bert/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2: 6799 Segmentation fault: 11 $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" Attached is a detailed error report. What did I overlook?? Thank you so much for help! Best, Anna External Email - Use Caution

3 9

Re: [Freesurfer] [ext] Re: Freeview crash
by fsbuild 03 Jan '25

03 Jan '25

External Email - Use Caution  Below are the commands I used to run freeview from the Freesurfer 7.4..0 release on a silicon Mac with an M2 processor running MacOS Sonoma 14.7.2 with Xquartz 2.8.5.  I put the freesurfer license.txt file under my home directory and set the FS_LICENSE environment variable to its path.  (If you add that FS_LICENSE setting to your shell initialization file, then you should not need to worry about setting up the license again no matter what freesurfer release/build you end up using).   I then ran freeview with no arguments to make sure it could open an empty window.  Then I had freeview display one of the volume files included with the example subject data. The old 7.4.0 release contains only Intel binaries and so has to run under Rosetta on silicon Macs with M processors.  While this should work for freeview, it will not work to run some of the other commands in the 7.4.0 distribution on a silicon Mac.  If you plan to use the freesurfer mri* commands, then you would be better off installing a native build of freesurfer compiled for the silicon Macs.   You can use this installer package to install a recent stable development build from 09/2024, https://secure-web.cisco.com/1mYajo-Nb3fUswwrx78iSXy97lDpj0Dp… If you want to try that development build, I would first remove the 7.4.0 release with the command,$ sudo bash /Applications/freesurfer/7.4.0/uninstall.sh With that development build, then FREESURFER_HOME would be set as in the commands below as,$ export FREESURFER_HOME=/Applications/freesurfer/dev - R. - - - - - - -  $ bash… output deleted …$ export FREESURFER_HOME=/Applications/freesurfer/7.4.0 $ source $FREESURFER_HOME/SetUpFreeSurfer.sh-------- freesurfer-darwin-macOS-7.4.0-20230510-e558e6e --------Setting up environment for FreeSurfer/FS-FAST (and FSL)FREESURFER_HOME   /Applications/freesurfer/7.4.0FSFAST_HOME       /Applications/freesurfer/7.4.0/fsfastFSF_OUTPUT_FORMAT nii.gzSUBJECTS_DIR      /Applications/freesurfer/7.4.0/subjectsMNI_DIR           /Applications/freesurfer/7.4.0/mni$ which freeview/Applications/freesurfer/7.4.0/bin/freeview$ export FS_LICENSE=$HOME/license.txt$ head -1 $FS_LICENSEyou(a)somewhere.com      <—— email address you used to register for license$ freeview     <—— check that freeview opens an empty window$ freeview $SUBJECTS_DIR/bert/mri/brain.mgz  <--- try opening one of the included volume files On Jan 3, 2025, at 00:49, Tietze, Anna <anna.tietze(a)charite.de> wrote:        External Email - Use Caution         M3 max processor Anna Von: freesurfer-bounces@nmr.mgh.harvard.edu <freesurfer-bounces(a)nmr.mgh.harvard.edu> im Auftrag von fsbuild <fsbuild(a)contbay.com> Gesendet: Donnerstag, 2. Januar 2025 19:46 An: freesurfer@nmr.mgh.harvard.edu Betreff: [ext] Re: [Freesurfer] Freeview crash         External Email - Use Caution         Are you running on an old Intel Mac or a Mac with one of the newer M1, M2, M3, M4 processors ? - R. On Jan 2, 2025, at 13:02, Wang, Ruopeng <RWANG4(a)mgh.harvard.edu> wrote:Have you tried running freeview as an app bundle? Or can you try running freeview directly from the binary location? Like this: $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview  On Jan 2, 2025, at 7:14 AM, Tietze, Anna <anna.tietze(a)charite.de> wrote: Hi, When I want to open files with freeview, it crashes immediately. I tried my own recon-all output and the bert dataset. Can you help me? Operating system: Mac, Sonoma 14.7.1Fressurfer version 7.4.0XQuatz 2.8.5licence.txt located in: /Applications/freesurfer/7.4.0/license.txt (can be read, as recon-all works)environment is set by FREESURFER_HOME=/Applications/freesurfer/7.4.0 and source $FREESURFER_HOME/SetUpFreeSurfer.sh When I run the command freeview, the following message is given:/Applications/freesurfer/7.4.0/bin/freeview: line 2:  6615 Segmentation fault: 11  $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" Or trying to open a file:freeview -v /Users/annatietze/Documents/freesurfer/freesurfer_subjects/nini_ra/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2:  6765 Segmentation fault: 11  $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" freeview -v /Applications/freesurfer/7.4.0/subjects/bert/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2:  6799 Segmentation fault: 11  $FREESURFER_HOME/Freeview..app/Contents/MacOS/freeview "$@" Attached is a detailed error report. What did I overlook?? Thank you so much for help! Best, Anna<problem report freeview.rtf>        External Email - Use Caution        _______________________________________________Freesurfer mailing listFreesurfer(a)nmr.mgh.harvard.eduMailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be https://secure-web.cisco.com/1QHuUffDuUmCT6Kur8brjyEtinGdgVAQ8kT19o… _______________________________________________ Freesurfer mailing list Freesurfer(a)nmr.mgh.harvard.edu https://secure-web.cisco.com/1QHuUffDuUmCT6Kur8brjyEtinGdgVAQ8kT19o05mNUMnZ… _______________________________________________Freesurfer mailing listFreesurfer@nmr.mgh.harvard.eduhttps://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer

1 0

Re: [Freesurfer] Freeview crash
by fsbuild 03 Jan '25

03 Jan '25

External Email - Use Caution  Are you running on an old Intel Mac or a Mac with one of the newer M1, M2, M3, M4 processors ? - R. On Jan 2, 2025, at 13:02, Wang, Ruopeng <RWANG4(a)mgh.harvard.edu> wrote:Have you tried running freeview as an app bundle? Or can you try running freeview directly from the binary location? Like this: $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview  On Jan 2, 2025, at 7:14 AM, Tietze, Anna <anna.tietze(a)charite.de> wrote: Hi, When I want to open files with freeview, it crashes immediately. I tried my own recon-all output and the bert dataset. Can you help me? Operating system: Mac, Sonoma 14.7.1Fressurfer version 7.4.0XQuatz 2.8.5licence.txt located in: /Applications/freesurfer/7.4.0/license..txt (can be read, as recon-all works)environment is set by FREESURFER_HOME=/Applications/freesurfer/7.4.0 and source $FREESURFER_HOME/SetUpFreeSurfer.sh When I run the command freeview, the following message is given:/Applications/freesurfer/7.4.0/bin/freeview: line 2:  6615 Segmentation fault: 11  $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" Or trying to open a file:freeview -v /Users/annatietze/Documents/freesurfer/freesurfer_subjects/nini_ra/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2:  6765 Segmentation fault: 11  $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" freeview -v /Applications/freesurfer/7.4.0/subjects/bert/mri/orig/001.mgz /Applications/freesurfer/7.4.0/bin/freeview: line 2:  6799 Segmentation fault: 11  $FREESURFER_HOME/Freeview.app/Contents/MacOS/freeview "$@" Attached is a detailed error report. What did I overlook?? Thank you so much for help! Best, Anna<problem report freeview.rtf>        External Email - Use Caution        _______________________________________________Freesurfer mailing listFreesurfer@nmr.mgh.harvard.eduhttps://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer _______________________________________________ Freesurfer mailing list Freesurfer(a)nmr.mgh.harvard.edu https://secure-web.cisco.com/18V4CVl0pNi04RSRcHVGUZZ2grg3UExn--vRzoOrrkkJKL…

2 1

Issues with MRI and PET Registration to fsaverage Template
by 문준호 02 Jan '25

02 Jan '25

External Email - Use Caution Hello, I am currently working on registering MRI and PET data from the ADNI dataset, processed using our custom preprocessing pipeline, to the fsaverage template. My goal is to align both the MRI and PET data to the fsaverage template. To achieve this, I followed these steps: *Step 1:* I used mri_coreg to create an LTA file for registering the MRI data to the fsaverage template. Then, I used mri_vol2vol to perform the registration of the MRI data to the fsaverage template. Commands Used: mri_coreg --mov $MRI_PATH --targ $FREESURFER_HOME/subjects/fsaverage/mri/brain.mgz --reg ${OUTPUT_DIR}/mri${num}_reg.lta mri_vol2vol --mov $MRI_PATH --targ $FREESURFER_HOME/subjects/fsaverage/mri/brain.mgz --reg ${OUTPUT_DIR}/mri${num}_reg.lta --o ${OUTPUT_DIR}/mri${num}_to_atlas.nii.gz *Step 2:* I used the LTA file generated in Step 1 and applied mri_vol2vol to register the PET data to the MRI data. Commands Used: mri_vol2vol --mov $PET_PATH --targ ${OUTPUT_DIR}/mri${num} _to_atlas .nii.gz --reg ${OUTPUT_DIR}/mri${num}_reg.lta --o ${OUTPUT_DIR}/pet${num}_to_atlas.nii.gz However, when visualizing the results using Freeview, I noticed that the registration of both the MRI and PET data to the fsaverage template is not accurate. (The MRI and PET data were successfully co-registered.) I have attached some images of the results and the output from the mri_info command for your reference. # freeview results ## Example 1[image: 6f1a5a16-f77f-493c-8802-925ef33a7f98.png] ## Example 2 [image: image.png] ## Example 3 [image: 37a638c7-944d-424c-af84-4fa1860560dc.png] # mri_info results ## T1w MRI niiRead(): detected input as 64 bit double, reading in as 32 bit float Volume information for {my_mri_data} type: nii dimensions: 128 x 128 x 128 voxel sizes: 1.000000, 1.000000, 1.000000 type: FLOAT (3) fov: 128.000 dof: 1 xstart: -64.0, xend: 64.0 ystart: -64.0, yend: 64.0 zstart: -64.0, zend: 64.0 TR: 0.00 msec, TE: 0.00 msec, TI: 0.00 msec, flip angle: 0.00 degrees nframes: 1 PhEncDir: UNKNOWN FieldStrength: 0.000000 ras xform present xform info: x_r = -1.0000, y_r = -0.0000, z_r = 0.0000, c_r = -13.0000 : x_a = -0.0000, y_a = 1.0000, z_a = -0.0000, c_a = 16.5000 : x_s = 0.0000, y_s = 0.0000, z_s = 1.0000, c_s = 11.5000 Orientation : LAS Primary Slice Direction: axial voxel to ras transform: -1.0000 -0.0000 0.0000 51.0000 -0.0000 1.0000 -0.0000 -47.5000 0.0000 0.0000 1.0000 -52.5000 0.0000 0.0000 0.0000 1.0000 voxel-to-ras determinant -1 ras to voxel transform: -1.0000 -0.0000 -0.0000 51.0000 -0.0000 1.0000 -0.0000 47.5000 -0.0000 -0.0000 1.0000 52.5000 -0.0000 -0.0000 -0.0000 1.0000 ## brain.mgz Volume information for /usr/local/freesurfer/7.4.1/subjects/fsaverage/mri/brain.mgz type: MGH dimensions: 256 x 256 x 256 voxel sizes: 1.000000, 1.000000, 1.000000 type: UCHAR (0) fov: 256.000 dof: 0 xstart: -128.0, xend: 128.0 ystart: -128.0, yend: 128.0 zstart: -128.0, zend: 128.0 TR: 0.00 msec, TE: 0.00 msec, TI: 0.00 msec, flip angle: 0.00 degrees nframes: 1 PhEncDir: UNKNOWN FieldStrength: 0.000000 ras xform present xform info: x_r = -1.0000, y_r = 0.0000, z_r = 0.0000, c_r = 0.0000 : x_a = 0.0000, y_a = 0.0000, z_a = 1.0000, c_a = 0.0000 : x_s = 0.0000, y_s = -1.0000, z_s = 0.0000, c_s = 0.0000 talairach xfm : /usr/local/freesurfer/7.4.1/subjects/fsaverage/mri/transforms/talairach.xfm Orientation : LIA Primary Slice Direction: coronal voxel to ras transform: -1.0000 0.0000 0.0000 128.0000 0.0000 0.0000 1.0000 -128.0000 0.0000 -1.0000 0.0000 128.0000 0.0000 0.0000 0.0000 1.0000 voxel-to-ras determinant -1 ras to voxel transform: -1.0000 -0.0000 -0.0000 128.0000 -0.0000 -0.0000 -1.0000 128.0000 -0.0000 1.0000 -0.0000 128.0000 -0.0000 -0.0000 -0.0000 1.0000 Could you please help me identify any potential issues with my approach or the commands I used? I would greatly appreciate any guidance you can provide. Thanks a lot! Best regards, Junho Moon

2 2

LME pipeline for individual ROIs
by Bondi, Daniel 02 Jan '25

02 Jan '25

External Email - Use Caution Hello FreeSurfer experts, I am using a mass-univariate pipeline to assess cortical thickness changes longitudinally at a regional level (based on the D-K atlas), and have been following this thread: https://secure-web.cisco.com/1gfQ9eWAEqDZ3DGmI9NL7F2WPKbHBLsM60VyuP_LVR3dT1… My pipeline is set up so that lme_mass_fit, lme_mass_F, and lme_mass_FDR are all run independently in a for-loop for each individual ROI, rather than altogether. Is this correct? As well, would using FDR2 be more advantageous than FDR? Best, Daniel Bondi

1 0

(no subject)
by Tommaso Mariani 02 Jan '25

02 Jan '25

External Email - Use Caution Dear authors, I'm trying to reconstruct a model of a brain from an MRI, and after completion of recon-all (without any errors) the results are truly poor. By looking through your tutorials I am quite confident to say that the problem is either one of intensity normalisation or of white matter segmentation (possibly, both), as you can see in the images attached. My first attempt is to insert some control points, though I wonder if I might need instead to fix the segmentation with the brush tool. Could it be possible to receive some feedback about this issue? Another issue regards the freeview software, as whenever I move with the arrows from a slice to another the loaded surfaces suddenly disappear and won't reappear unless I delete and reopen them, and it makes it really hard to insert control points if I can't see the surfaces' outlines. Also, I was wondering if the computational cost of the autorecon2-cp is dependent significantly on the number of control points. The pictures shows the lh.white, rh.white files over the T1.mgz file and the wm.mgz and control.dat files over the brain mask.mgz file. Thanks in advance for your help, Tommaso Mariani

2 3

preparing config file for Tracula
by Barletta, Valeria 02 Jan '25

02 Jan '25

Dear Freesurfers, I am setting up the configuration file to run Tracula preproc. I have some doubts on some variables... * pedir: on my DTI protocol I have "PhaseEncodingDirection": "j-",so I assume it is AP * epifactor : I took it from "EchoTrainLength": 48 * echospacing: shall I take it from "DwellTime": 2.5e-06? Should that be indicated in seconds or milliseconds? Thank you, Valeria

1 0

Re: [Freesurfer] Recon-all Error: "ln: failed to create symbolic link 'lh.white.H': Operation not permitted"
by fsbuild 02 Jan '25

02 Jan '25

External Email - Use Caution  Hello Pei-Ying,  It does not work to run freesurfer/recon-all command(s) on subject data that lives on a Windows formatted drive (in your case visible from inside the Linux VM via the mount point to drive d, /mnt/d).   The SUBJECTS_DIR needs to point to a path in the VM Linux filesystem since Windows file systems, e.g., NTFS,  do not support symbolic linking of files.  One way to do that is to put your subject data under your home directory in the Linux VM. $ cd $HOME$ mkdir subject_data… copy in your data to process from /mnt/d …… setup the freesurfer environment as usual by setting FREESURFER_HOME and source the shell init file …… then change SUBJECTS_DIR to point the new location in your Linux $HOME directory ...$ export SUBJECTS_DIR=$HOME/subject_data - R. On Jan 1, 2025, at 22:17, 蔡佩穎 <pcai903(a)gmail.com> wrote:        External Email - Use Caution        Dear FreeSurfer Team, I am attempting to run Recon-all on my data from my research institute, using WSL Ubuntu22.04.5 LTS. On my first attempt to run Recon-all, I got the error shown below: #@# Curv .H and .K rh Thu Jan  2 00:06:17 CST 2025 /mnt/d/suicide/Raw_UD/UD001/surf  mris_curvature -w -seed 1234 rh.white.preaparc rm -f rh.white.H ln -s rh.white.preaparc.H rh.white.H rm -f rh.white.K ln -s rh.white.preaparc.K rh.white.K  mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 rh.inflated cd /mnt/d/suicide/Raw_UD/UD001/surf reconbatchjobs /mnt/d/suicide/Raw_UD/UD001/scripts/recon-all.log mris_curvature_white_lh.cmd rm_curvature_white_lh.H.cmd ln_curvature_white_lh.H.cmd rm_curvature_white_lh.K.cmd ln_curvature_white_lh.K.cmd mris_curvature_inflated_lh.cmd mris_curvature_white_rh.cmd rm_curvature_white_rh.H.cmd ln_curvature_white_rh.H.cmd rm_curvature_white_rh.K.cmd ln_curvature_white_rh.K.cmd mris_curvature_inflated_rh.cmd Waiting for PID 5816 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5819 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5822 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5825 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5828 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5831 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete.... Waiting for PID 5834 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5837 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5840 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5843 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5846 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5849 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete...  mris_curvature -w -seed 1234 lh.white.preaparc setting seed for random number generator to 1234 total integrated curvature = 12.423*4pi (156.109) --> -11 handles ICI = 177.4, FI = 1660.9, variation=26709.915 writing Gaussian curvature to ./lh.white.preaparc.K...done. writing mean curvature to ./lh.white.preaparc.H...mris_curvature done.  rm -f lh.white.H  ln -s lh.white.preaparc.H lh.white.H ln: failed to create symbolic link 'lh.white.H': Operation not permitted  rm -f lh.white.K  ln -s lh.white.preaparc.K lh.white.K ln: failed to create symbolic link 'lh..white.K': Operation not permitted  mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 lh.inflated setting seed for random number generator to 1234 normalizing curvature values. averaging curvature patterns 5 times. sampling 10 neighbors out to a distance of 10 mm 154 vertices thresholded to be in k1 ~ [-0.54 0.37], k2 ~ [-0.15 0.16] total integrated curvature = 0.361*4pi (4.532) --> 1 handles ICI = 1.5, FI = 8.8, variation=154.684 133 vertices thresholded to be in [-0.04 0.03] writing Gaussian curvature to ./lh.inflated.K...thresholding curvature at 99.90% level curvature mean = 0.000, std = 0.002 133 vertices thresholded to be in [-0.22 0.14] done. writing mean curvature to ./lh.inflated.H...curvature mean = -0.016, std = 0.023 mris_curvature done.  mris_curvature -w -seed 1234 rh.white.preaparc setting seed for random number generator to 1234 total integrated curvature = 23.152*4pi (290.942) --> -22 handles ICI = 182.8, FI = 1734.3, variation=27614.160 writing Gaussian curvature to ./rh.white.preaparc.K...done. writing mean curvature to ./rh.white.preaparc.H...mris_curvature done.  rm -f rh.white.H  ln -s rh.white.preaparc.H rh.white.H ln: failed to create symbolic link 'rh.white.H': Operation not permitted  rm -f rh.white.K  ln -s rh.white.preaparc.K rh.white.K ln: failed to create symbolic link 'rh.white.K': Operation not permitted  mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 rh.inflated setting seed for random number generator to 1234 normalizing curvature values. averaging curvature patterns 5 times. sampling 10 neighbors out to a distance of 10 mm 157 vertices thresholded to be in k1 ~ [-0.46 0.97], k2 ~ [-0.22 0.16] total integrated curvature = 0.314*4pi (3.949) --> 1 handles ICI = 1.4, FI = 9.6, variation=164.776 152 vertices thresholded to be in [-0.07 0.03] writing Gaussian curvature to ./rh.inflated.K...thresholding curvature at 99.90% level curvature mean = 0.000, std = 0.002 107 vertices thresholded to be in [-0.21 0.22] done. writing mean curvature to ./rh.inflated.H...curvature mean = -0.017, std = 0.024 mris_curvature done. PIDs (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) completed and logs appended. Linux DESKTOP-M947IPI 5.15.167.4-microsoft-standard-WSL2 #1 SMP Tue Nov 5 00:21:55 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux recon-all -s UD001 exited with ERRORS at Thu Jan  2 00:06:41 CST 2025 I tried following one of the suggestions in the archives: Method one  /usr/local/freesurfer/7.4.1/subjects drwxr-xr-x 14 root root 4096 Dec 31 16:45 /usr/local/freesurfer/7.4.1/subjects udo chown -R bml-4090:bml-4090 /usr/local/freesurfer/7.4.1/subjects ls -ld /usr/local/freesurfer/7.4.1/subjects drwxr-xr-x 14 bml-4090 bml-4090 4096 Dec 31 16:45 /usr/local/freesurfer/7.4.1/subjects Method two bml-4090@DESKTOP-M947IPI:~$ ls -l lh.white.H lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan  1 21:03 lh.white.H -> lh.white.preaparc.Hbml-4090@DESKTOP-M947IPI:~$ ls -l rh.white.H lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan  1 21:02 rh.white.H -> rh.white.preaparc.H bml-4090@DESKTOP-M947IPI:~$ ls -l rh.white.K lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan  1 21:02 rh.white.K -> rh.white.preaparc.K bml-4090@DESKTOP-M947IPI:~$ ls -l lh.white.K lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan  1 21:02 lh.white.K -> lh.white.preaparc.K How can I allow symbolic links? Thank you so much for your help!Happy new year! Best wishes, Pei-Ying <recon-all.log>

1 0

Recon-all Error: "ln: failed to create symbolic link 'lh.white.H': Operation not permitted"
by 蔡佩穎 01 Jan '25

01 Jan '25

External Email - Use Caution Dear FreeSurfer Team, I am attempting to run Recon-all on my data from my research institute, using WSL Ubuntu22.04.5 LTS. On my first attempt to run Recon-all, I got the error shown below: #@# Curv .H and .K rh Thu Jan 2 00:06:17 CST 2025 /mnt/d/suicide/Raw_UD/UD001/surf mris_curvature -w -seed 1234 rh.white.preaparc rm -f rh.white.H ln -s rh.white.preaparc.H rh.white.H rm -f rh.white.K ln -s rh.white.preaparc.K rh.white.K mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 rh.inflated cd /mnt/d/suicide/Raw_UD/UD001/surf reconbatchjobs /mnt/d/suicide/Raw_UD/UD001/scripts/recon-all.log mris_curvature_white_lh.cmd rm_curvature_white_lh.H.cmd ln_curvature_white_lh.H.cmd rm_curvature_white_lh.K.cmd ln_curvature_white_lh.K.cmd mris_curvature_inflated_lh.cmd mris_curvature_white_rh.cmd rm_curvature_white_rh.H.cmd ln_curvature_white_rh.H.cmd rm_curvature_white_rh.K.cmd ln_curvature_white_rh.K.cmd mris_curvature_inflated_rh.cmd Waiting for PID 5816 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5819 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5822 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5825 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5828 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5831 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5834 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5837 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5840 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5843 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5846 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... Waiting for PID 5849 of (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) to complete... mris_curvature -w -seed 1234 lh.white.preaparc setting seed for random number generator to 1234 total integrated curvature = 12.423*4pi (156.109) --> -11 handles ICI = 177.4, FI = 1660.9, variation=26709.915 writing Gaussian curvature to ./lh.white.preaparc.K...done. writing mean curvature to ./lh.white.preaparc.H...mris_curvature done. rm -f lh.white.H ln -s lh.white.preaparc.H lh.white.H ln: failed to create symbolic link 'lh.white.H': Operation not permitted rm -f lh.white.K ln -s lh.white.preaparc.K lh.white.K ln: failed to create symbolic link 'lh.white.K': Operation not permitted mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 lh.inflated setting seed for random number generator to 1234 normalizing curvature values. averaging curvature patterns 5 times. sampling 10 neighbors out to a distance of 10 mm 154 vertices thresholded to be in k1 ~ [-0.54 0.37], k2 ~ [-0.15 0.16] total integrated curvature = 0.361*4pi (4.532) --> 1 handles ICI = 1.5, FI = 8.8, variation=154.684 133 vertices thresholded to be in [-0.04 0.03] writing Gaussian curvature to ./lh.inflated.K...thresholding curvature at 99.90% level curvature mean = 0.000, std = 0.002 133 vertices thresholded to be in [-0.22 0.14] done. writing mean curvature to ./lh.inflated.H...curvature mean = -0.016, std = 0.023 mris_curvature done. mris_curvature -w -seed 1234 rh.white.preaparc setting seed for random number generator to 1234 total integrated curvature = 23.152*4pi (290.942) --> -22 handles ICI = 182.8, FI = 1734.3, variation=27614.160 writing Gaussian curvature to ./rh.white.preaparc.K...done. writing mean curvature to ./rh.white.preaparc.H...mris_curvature done. rm -f rh.white.H ln -s rh.white.preaparc.H rh.white.H ln: failed to create symbolic link 'rh.white.H': Operation not permitted rm -f rh.white.K ln -s rh.white.preaparc.K rh.white.K ln: failed to create symbolic link 'rh.white.K': Operation not permitted mris_curvature -seed 1234 -thresh .999 -n -a 5 -w -distances 10 10 rh.inflated setting seed for random number generator to 1234 normalizing curvature values. averaging curvature patterns 5 times. sampling 10 neighbors out to a distance of 10 mm 157 vertices thresholded to be in k1 ~ [-0.46 0.97], k2 ~ [-0.22 0.16] total integrated curvature = 0.314*4pi (3.949) --> 1 handles ICI = 1.4, FI = 9.6, variation=164.776 152 vertices thresholded to be in [-0.07 0.03] writing Gaussian curvature to ./rh.inflated.K...thresholding curvature at 99.90% level curvature mean = 0.000, std = 0.002 107 vertices thresholded to be in [-0.21 0.22] done. writing mean curvature to ./rh.inflated.H...curvature mean = -0.017, std = 0.024 mris_curvature done. PIDs (5816 5819 5822 5825 5828 5831 5834 5837 5840 5843 5846 5849) completed and logs appended. Linux DESKTOP-M947IPI 5.15.167.4-microsoft-standard-WSL2 #1 SMP Tue Nov 5 00:21:55 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux recon-all -s UD001 exited with ERRORS at Thu Jan 2 00:06:41 CST 2025 I tried following one of the suggestions in the archives: Method one /usr/local/freesurfer/7.4.1/subjects drwxr-xr-x 14 root root 4096 Dec 31 16:45 /usr/local/freesurfer/7.4.1/subjects udo chown -R bml-4090:bml-4090 /usr/local/freesurfer/7.4.1/subjects ls -ld /usr/local/freesurfer/7.4.1/subjects drwxr-xr-x 14 bml-4090 bml-4090 4096 Dec 31 16:45 /usr/local/freesurfer/7.4.1/subjects Method two bml-4090@DESKTOP-M947IPI:~$ ls -l lh.white.H lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan 1 21:03 lh.white.H -> lh.white.preaparc.H bml-4090@DESKTOP-M947IPI:~$ ls -l rh.white.H lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan 1 21:02 rh.white.H -> rh.white.preaparc.H bml-4090@DESKTOP-M947IPI:~$ ls -l rh.white.K lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan 1 21:02 rh.white.K -> rh.white.preaparc.K bml-4090@DESKTOP-M947IPI:~$ ls -l lh.white.K lrwxrwxrwx 1 bml-4090 bml-4090 19 Jan 1 21:02 lh.white.K -> lh.white.preaparc.K How can I allow symbolic links? Thank you so much for your help!Happy new year! Best wishes, Pei-Ying

1 0

Re: [Freesurfer] Freesurfer Digest, Vol 250, Issue 15
by 黄月虹 01 Jan '25

01 Jan '25

External Email - Use Caution no such email ，thanks 2025-01-01 05:31:40 freesurfer-request(a)nmr.mgh.harvard.edu 写道： > Send Freesurfer mailing list submissions to > freesurfer(a)nmr.mgh.harvard.edu > > To subscribe or unsubscribe via the World Wide Web, visit > https://secure-web.cisco.com/1wJAnXMczrqK31YqonoPUvDDVxQtRZHFiy6BMW8aPqBziJ… > or, via email, send a message with subject or body 'help' to > freesurfer-request(a)nmr.mgh.harvard.edu > > You can reach the person managing the list at > freesurfer-owner(a)nmr.mgh.harvard.edu > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freesurfer digest..." > > > Today's Topics: > > 1. Bug Report for Beta Version of FreeSurfer (8.0.0-beta) > (Zhang, Chaokai) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 31 Dec 2024 21:31:40 +0000 > From: "Zhang, Chaokai" <czhang9(a)wpi.edu> > Subject: [Freesurfer] Bug Report for Beta Version of FreeSurfer > (8.0.0-beta) > To: "freesurfer(a)nmr.mgh.harvard.edu" <freesurfer(a)nmr.mgh.harvard.edu> > Message-ID: > <CYYPR01MB86123CBE371264C1997BE739EE0A2(a)CYYPR01MB8612.prod.exchangelabs.com> > > Content-Type: text/plain; charset="us-ascii" > > External Email - Use Caution > > Hello FreeSurfer Developers, > Happy New Year! > > I am currently using the latest beta version of FreeSurfer (freesurfer-linux-ubuntu22_x86_64-8.0.0-beta) and have been impressed by the significant acceleration in the recon-all process. However, I encountered an issue while performing a simple labelization on a T1-weighted sample using mri_watershed. When running the command: > mri_watershed -LABEL T1.mgz T1_label.mgz > > I noticed that the output file (T1_label.mgz) is shifted and does not align with the original T1-weighted sample. To confirm, I ran the same command using the stable version (7.4.1), and the output aligned correctly with the T1-weighted sample. > [cid:image001.png@01DB5BA1.780AAF30] > This is just a bug report and does not require any assistance. I wanted to bring this to your attention. Thank you for your hard work and dedication to improving FreeSurfer. > details of my system: > 1) FreeSurfer version: freesurfer-linux-ubuntu22_x86_64-8.0.0-beta > 2) Platform: Ubuntu 24.04.1 LTS > 3) uname -a: Linux Kai 5.15.167.4-microsoft-standard-WSL2 #1 SMP Tue Nov 5 00:21:55 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux > > Best regards, > Chaokai > >

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer