New subject: Recon-all difficulties off-site

4 Jun 2013

      ...
Hi Doug,
The command runs a bit further now but then exits with errors.
Unfortunately this time there is no specific stated error. The last few
lines of the log are:
INFO: extension is mgz
#--------------------------------------------
#@# Talairach Tue Jun  4 13:22:08 EDT 2013
/gpfs/data/twhite/anitenso/FreesurferPractice/unpack4/mri
mri_nu_correct.mni --n 1 --proto-iters 1000 --distance 50 --no-rescale
--i orig.mgz --o orig_nu.mgz
Linux node271 2.6.32-279.2.1.el6.x86_64 #1 SMP Fri Jul 20 01:55:29 UTC
2012 x86_64 x86_64 x86_64 GNU/Linux
recon-all -s unpack4 exited with ERRORS at Tue Jun  4 13:22:10 EDT 2013
The only other section of the log that seems like it could be related to
an error is:
Can't locate MNI/Startup.pm in @INC (@INC contains:
/gpfs/runtime/opt/perl/5.16.0/lib
/gpfs/runtime/opt/perl/5.16.0/lib/site_perl /usr/local/lib64/perl5
/usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at
/gpfs/runtime/opt/freesurfer/5.2.0/mni/bin/nu_correct line 37.
BEGIN failed--compilation aborted at
/gpfs/runtime/opt/freesurfer/5.2.0/mni/bin/nu_correct line 37.
So, I'm not sure what it's not liking here.
Thanks again,
Adam
On Tue, Jun 4, 2013 at 11:44 AM, Douglas N Greve <
greve@nmr.mgh.harvard.edu> wrote:
...
That dcmunpack command will put the data into a file called
unpack3/MPRAGE/002/struct.nii
It needs to be put into upack3/mri/orig/002.mgz
doug
On 06/04/2013 11:22 AM, Nitenson, Adam wrote:
...
Hi Doug,
When I try the command as you suggested:
recon-all -all -s unpack3
I get the following error:
ERROR: no run data found in /gpfs/data/twhite/anitenso/**
FreesurferPractice/unpack3/**mri. Make sure to
have a volume called 001.mgz in  /gpfs/data/twhite/anitenso/**
FreesurferPractice/unpack3/**mri/orig
Do you know why I might be lacking that volume? This was not usually an
issue after running the two unpacksdcmdir commands (for MPRAGE and bold
runs).
Thanks,
Adam
On Mon, Jun 3, 2013 at 3:44 PM, Douglas N Greve <
greve@nmr.mgh.harvard.edu <mailto:greve@nmr.mgh.harvard.**edugreve@nmr.mgh.harvard.edu>>
wrote:
Hi Adam, if the subject folder exists and you pass recon-all a -i
flag,
then it will exit with error saying that the data exist (otherwise it
would overwrite what is there). However, just because the subject
folder
exists does not mean that there is any data sitting in
subject/mri/orig.
Then it will tell you that it cannot find any data.

Note that when you run recon-all, you need to tell it to do something
(eg, add the "-all" flag to do everything)

doug

On 06/03/2013 03:21 PM, Nitenson, Adam wrote:
> Hello users,
>
> I am trying to get Freesurfer (5.2) working properly off-site and

am
    > encountering errors I did not have while working at the Martinos
    > center. We use the same Siemens 3T Tim Trio scanner at Brown, so I
    > would hope the data is similar to work with.
    >
    > I have been using dcmunpack since unpacksdcmdir is not
    identifying the
    > DICOM files properly. I have successfully unpacked the
    structural and
    > bold scans using the command (entered from the raw scan data
folder:
    >
    > dcmunpack -src DICOM -targ (path)/FreesurferPractice/**unpack3
-run 2
    > MPRAGE nii struct     (I also tried using mgz instead of nii,
    and also
    > changed struct to other things as it appears to be a naming
    argument)
    >
    > dcmunpack -src DICOM -targ (path)/FreesurferPractice/**unpack3
-fsfast
    > -run 3 bold nii f.nii -run 4 bold nii f.nii -run 5 bold nii
    f.nii -run
    > 6 bold nii f.nii -run 7 bold nii f.nii -run 8 bold nii f.nii -run 9
    > bold nii f.nii
    >
    > (path) just being an abbreviate piece of the relevant pathway
    >
    > These generate the MPRAGE and bold folders in the subject folder as
    > expected. I have difficulties with the next commands
    (environment has
    > been set).
    >
    > I try:
    > recon-all -i <path to structural data> -s <subject name> -force
    > recon-all -i (path)/FreesurferPractice/**unpack/MPRAGE/002 -s
unpack3
    > (I got an error about using -force so I omitted that from my
    command)
    >
    > and get the following Error
    > ERROR: You are trying to re-run an existing subject with (possibly)
    >  new input data (-i). If this is truly new input data, you
    should delete
    >  the subject folder and re-run, or specify a different subject
name.
    >  If you are just continuing an analysis of an existing subject,
then
    >  omit all -i flags.
    >
    > Yet when I omit -i and just use "recon-all -s unpack3", I get
    "ERROR:
    > nothing to do"
    >
    > I tried a different tactic and used
    >
    > "recon-all -s unpack3 -autorecon1" as well as "recon-all
    > -autorecon-all -s unpack3"
    >
    > which both created the various folders (bem, label, mri, surf, etc)
    > but failed with
    > "ERROR: no run data found in (path)/FreesurferPractice/**
unpack3/mri.
    > Make sure to have a volume called 001.mgz in
    > (path)/FreesurferPractice/**unpack3/mri/orig. If you have a
second run
    > of data call it 002.mgz, etc."
    >
    > I have tried these commands in both bash and tcsh shells with
    the same
    > effect. So the problem, it seems, is that my "mri" file is
    blank, and
    > this was not a problem I had running these commands at Martinos.
Any
    > idea what the issue might be?
    >
    > Best,
    >
    > Adam Nitenson
    > Neuroscience Graduate Program
    > Laboratory of Affective Neuroscience
    > Brown University
    >
    >
    >
    > ______________________________**_________________
    > Freesurfer mailing list
    > Freesurfer@nmr.mgh.harvard.edu
    <mailto:Freesurfer@nmr.mgh.**harvard.eduFreesurfer@nmr.mgh.harvard.edu
...
> https://mail.nmr.mgh.harvard.**edu/mailman/listinfo/**freesurfer<https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer>

--
Douglas N. Greve, Ph.D.
MGH-NMR Center
greve@nmr.mgh.harvard.edu <mailto:greve@nmr.mgh.harvard.**edu<greve@nmr.mgh.harvard.edu>

...
Phone Number: 617-724-2358 <tel:617-724-2358>
Fax: 617-726-7422 <tel:617-726-7422>

Bugs: surfer.nmr.mgh.harvard.edu/**fswiki/BugReporting<http://surfer.nmr.mgh.harvard.edu/fswiki/BugReporting>
<http://surfer.nmr.mgh.**harvard.edu/fswiki/**BugReporting<http://surfer.nmr.mgh.harvard.edu/fswiki/BugReporting>

...
FileDrop: https://gate.nmr.mgh.harvard.**edu/filedrop2<https://gate.nmr.mgh.harvard.edu/filedrop2>
www.nmr.mgh.harvard.edu/**facility/filedrop/index.html<http://www.nmr.mgh.harvard.edu/facility/filedrop/index.html>
<http://www.nmr.mgh.harvard.**edu/facility/filedrop/index.**html<http://www.nmr.mgh.harvard.edu/facility/filedrop/index.html>

...
Outgoing:
ftp://surfer.nmr.mgh.harvard.**edu/transfer/outgoing/flat/**greve/<ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/>

______________________________**_________________
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu <mailto:Freesurfer@nmr.mgh.**

harvard.edu Freesurfer@nmr.mgh.harvard.edu>
https://mail.nmr.mgh.harvard.**edu/mailman/listinfo/**freesurfer<https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer>

The information in this e-mail is intended only for the person to
whom it is
addressed. If you believe this e-mail was sent to you in error and
the e-mail
contains patient information, please contact the Partners
Compliance HelpLine at
http://www.partners.org/**complianceline<http://www.partners.org/complianceline>. If the e-mail was sent to
you in error
but does not contain patient information, please contact the
sender and properly
dispose of the e-mail.

--
Douglas N. Greve, Ph.D.
MGH-NMR Center
greve@nmr.mgh.harvard.edu
Phone Number: 617-724-2358
Fax: 617-726-7422
Bugs: surfer.nmr.mgh.harvard.edu/**fswiki/BugReportinghttp://surfer.nmr.mgh.harvard.edu/fswiki/BugReporting
FileDrop: https://gate.nmr.mgh.harvard.**edu/filedrop2https://gate.nmr.mgh.harvard.edu/filedrop2
www.nmr.mgh.harvard.edu/**facility/filedrop/index.htmlhttp://www.nmr.mgh.harvard.edu/facility/filedrop/index.html
Outgoing: ftp://surfer.nmr.mgh.harvard.**edu/transfer/outgoing/flat/**
greve/ ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/

Re: [Freesurfer] Recon-all difficulties off-site