Can you send the `mri/mri_nu_correct.mni.log` file as well? Have you installed minc tools separately on your local machine and do you have any of these variables set in your default environment?

MNI_DIR MINC_BIN_DIR MINC_LIB_DIR

It’s possible there’s another install of MNI that’s interfering with the freesurfer one. Andrew

From: freesurfer-bounces@nmr.mgh.harvard.edu freesurfer-bounces@nmr.mgh.harvard.edu on behalf of Michele Valotti michele.valotti@gmail.com Date: Monday, February 8, 2021 at 9:53 AM To: Freesurfer support list freesurfer@nmr.mgh.harvard.edu Subject: Re: [Freesurfer] mincRead error

External Email - Use Caution attached is the log for the run, the version of mri_convert is the same version on my local machine (where the command runs) and in the cloud instance

On Fri, 5 Feb 2021 at 18:02, Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> wrote: Hi all, I am running long FreeSurfer and after successfully testing it on my local machine I tried to run it on a server (which should however have the same FreeSurfer version and setup), but I am getting this error

mri_convert ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform mri_convert.bin ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform ncopen: filename "./tmp.mri_nu_correct.mni.533/nu1.mnc": Not a netCDF file miopen: MINC package entry point Error opening ./tmp.mri_nu_correct.mni.533/nu1.mnc mincRead(): error reading volume from file ./tmp.mri_nu_correct.mni.533/nu1.mnc $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from ./tmp.mri_nu_correct.mni.533/nu1.mnc... Linux 18e36413df0c 5.4.0-1030-aws #31~18.04.1-Ubuntu SMP Tue Nov 17 10:48:34 UTC 2020 x86_64 GNU/Linux

recon-all -s base_freesurfer exited with ERRORS at Fri Feb 5 17:45:34 UTC 2021

Any idea what the cause of this might be? Thank you!

External Email - Use Caution

Hi Trisanna, thank you for your reply, I am using minc2 (version 1.9.16) but this is the same version I use on my local machine and it does not give any errors there, and SetUpFreesurfer is sourced before exporting MINC paths and variables.

Michele

On Wed, 10 Feb 2021 at 14:57, Trisanna Sprung-Much < trisanna.sprung-much@mail.mcgill.ca> wrote:

    External Email - Use Caution

Hi All

As a frequent user of minctools, I know I’ve had problems in the past if I source minctools before sourcing freesurfer in the same terminal, because freesurfer uses an older version of minctools.

Also, freesurfer uses minc1 format not minc2.

Best,

Trisanna Sprung-Much

Research Associate

McGill University

MD Anderson Cancer Centre

--

*From: *freesurfer-bounces@nmr.mgh.harvard.edu on behalf of "Hoopes, Andrew" AHOOPES@mgh.harvard.edu *Reply-To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Date: *Wednesday, February 10, 2021 at 9:54 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

Can you send the `mri/mri_nu_correct.mni.log` file as well? Have you installed minc tools separately on your local machine and do you have any of these variables set in your default environment?

MNI_DIR

MINC_BIN_DIR

MINC_LIB_DIR

It’s possible there’s another install of MNI that’s interfering with the freesurfer one.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Monday, February 8, 2021 at 9:53 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

attached is the log for the run, the version of mri_convert is the same version on my local machine (where the command runs) and in the cloud instance

On Fri, 5 Feb 2021 at 18:02, Michele Valotti michele.valotti@gmail.com wrote:

Hi all,

I am running long FreeSurfer and after successfully testing it on my local machine I tried to run it on a server (which should however have the same FreeSurfer version and setup), but I am getting this error

mri_convert ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform mri_convert.bin ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform ncopen: filename "./tmp.mri_nu_correct.mni.533/nu1.mnc": Not a netCDF file miopen: MINC package entry point Error opening ./tmp.mri_nu_correct.mni.533/nu1.mnc mincRead(): error reading volume from file ./tmp.mri_nu_correct.mni.533/nu1.mnc $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from ./tmp.mri_nu_correct.mni.533/nu1.mnc... Linux 18e36413df0c 5.4.0-1030-aws #31~18.04.1-Ubuntu SMP Tue Nov 17 10:48:34 UTC 2020 x86_64 GNU/Linux

recon-all -s base_freesurfer exited with ERRORS at Fri Feb 5 17:45:34 UTC 2021

Any idea what the cause of this might be?

Thank you!

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://secure-web.cisco.com/1JGrZCpBCSuPapkm_HHIatoVooBbQLB65QiBaa7gloZuDTa...

External Email - Use Caution

Hi Andrew, I do think the problem is in the MINC but the minc paths point to the freesurfer installation, so I think it should be running using that

thank you, Michele

On Thu, 11 Feb 2021 at 16:29, Hoopes, Andrew AHOOPES@mgh.harvard.edu wrote:

Hi Michele,

I think that’s the problem then. The freesurfer code is written to work with the specific version of minc that we distribute with the release. If possible, you should run freesurfer without setting any MINC paths to your local install to see if that fixes things.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Thursday, February 11, 2021 at 11:02 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

Hi Trisanna,

thank you for your reply, I am using minc2 (version 1.9.16) but this is the same version I use on my local machine and it does not give any errors there, and SetUpFreesurfer is sourced before exporting MINC paths and variables.

Michele

On Wed, 10 Feb 2021 at 14:57, Trisanna Sprung-Much < trisanna.sprung-much@mail.mcgill.ca> wrote:

•    External Email - Use Caution        *
  
  

Hi All

As a frequent user of minctools, I know I’ve had problems in the past if I source minctools before sourcing freesurfer in the same terminal, because freesurfer uses an older version of minctools.

Also, freesurfer uses minc1 format not minc2.

Best,

Trisanna Sprung-Much

Research Associate

McGill University

MD Anderson Cancer Centre

--

*From: *freesurfer-bounces@nmr.mgh.harvard.edu on behalf of "Hoopes, Andrew" AHOOPES@mgh.harvard.edu *Reply-To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Date: *Wednesday, February 10, 2021 at 9:54 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

Can you send the `mri/mri_nu_correct.mni.log` file as well? Have you installed minc tools separately on your local machine and do you have any of these variables set in your default environment?

MNI_DIR

MINC_BIN_DIR

MINC_LIB_DIR

It’s possible there’s another install of MNI that’s interfering with the freesurfer one.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Monday, February 8, 2021 at 9:53 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

attached is the log for the run, the version of mri_convert is the same version on my local machine (where the command runs) and in the cloud instance

On Fri, 5 Feb 2021 at 18:02, Michele Valotti michele.valotti@gmail.com wrote:

Hi all,

I am running long FreeSurfer and after successfully testing it on my local machine I tried to run it on a server (which should however have the same FreeSurfer version and setup), but I am getting this error

mri_convert ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform mri_convert.bin ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform ncopen: filename "./tmp.mri_nu_correct.mni.533/nu1.mnc": Not a netCDF file miopen: MINC package entry point Error opening ./tmp.mri_nu_correct.mni.533/nu1.mnc mincRead(): error reading volume from file ./tmp.mri_nu_correct.mni.533/nu1.mnc $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from ./tmp.mri_nu_correct.mni.533/nu1.mnc... Linux 18e36413df0c 5.4.0-1030-aws #31~18.04.1-Ubuntu SMP Tue Nov 17 10:48:34 UTC 2020 x86_64 GNU/Linux

recon-all -s base_freesurfer exited with ERRORS at Fri Feb 5 17:45:34 UTC 2021

Any idea what the cause of this might be?

Thank you!

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu *MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be* https://secure-web.cisco.com/1xs9PzPP9V2FuqxvdDUNBOJ4r4_8Psp1WNP2tVrDYnPLg4T... https://secure-web.cisco.com/1JGrZCpBCSuPapkm_HHIatoVooBbQLB65QiBaa7gloZuDTas3F7Jm5NUb0Jh70_kAxkiyAieOo4vj5KWnmyBckkZfLu5nV0KX3Mgw7SIvo89FMuleCURamxNMyNKLld0AulzlbFQN38jsbEpwGx9wGmFPQS4gS9S-eUBjNstDxOMweGNSdRBNhB41QYIdh7qgt-XD01A9MibR5VGK_Izj3WoT1yzm6BsCYIFiFRg95tYg3xA3NqMoGwukf1F2NvrYpc-xnrg8KIrVPxavMFasuA/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://secure-web.cisco.com/1xs9PzPP9V2FuqxvdDUNBOJ4r4_8Psp1WNP2tVrDYnPLg4T...

External Email - Use Caution

Hi Andrew, thank you for your help, I have attached the mri_nu_correct log from the base freesurfer directory, let me know if this helps

Michele

On Thu, 11 Feb 2021 at 17:16, Hoopes, Andrew AHOOPES@mgh.harvard.edu wrote:

If you send the mri_nu_correct.mni.log we can figure it out for sure.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Thursday, February 11, 2021 at 12:07 PM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

Hi Andrew,

I do think the problem is in the MINC but the minc paths point to the freesurfer installation, so I think it should be running using that

thank you,

Michele

On Thu, 11 Feb 2021 at 16:29, Hoopes, Andrew AHOOPES@mgh.harvard.edu wrote:

Hi Michele,

I think that’s the problem then. The freesurfer code is written to work with the specific version of minc that we distribute with the release. If possible, you should run freesurfer without setting any MINC paths to your local install to see if that fixes things.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Thursday, February 11, 2021 at 11:02 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

Hi Trisanna,

thank you for your reply, I am using minc2 (version 1.9.16) but this is the same version I use on my local machine and it does not give any errors there, and SetUpFreesurfer is sourced before exporting MINC paths and variables.

Michele

On Wed, 10 Feb 2021 at 14:57, Trisanna Sprung-Much < trisanna.sprung-much@mail.mcgill.ca> wrote:

•    External Email - Use Caution        *
  
  

Hi All

As a frequent user of minctools, I know I’ve had problems in the past if I source minctools before sourcing freesurfer in the same terminal, because freesurfer uses an older version of minctools.

Also, freesurfer uses minc1 format not minc2.

Best,

Trisanna Sprung-Much

Research Associate

McGill University

MD Anderson Cancer Centre

--

*From: *freesurfer-bounces@nmr.mgh.harvard.edu on behalf of "Hoopes, Andrew" AHOOPES@mgh.harvard.edu *Reply-To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Date: *Wednesday, February 10, 2021 at 9:54 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

Can you send the `mri/mri_nu_correct.mni.log` file as well? Have you installed minc tools separately on your local machine and do you have any of these variables set in your default environment?

MNI_DIR

MINC_BIN_DIR

MINC_LIB_DIR

It’s possible there’s another install of MNI that’s interfering with the freesurfer one.

Andrew

*From: *freesurfer-bounces@nmr.mgh.harvard.edu < freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti < michele.valotti@gmail.com> *Date: *Monday, February 8, 2021 at 9:53 AM *To: *Freesurfer support list freesurfer@nmr.mgh.harvard.edu *Subject: *Re: [Freesurfer] mincRead error

•    External Email - Use Caution        *
  
  

attached is the log for the run, the version of mri_convert is the same version on my local machine (where the command runs) and in the cloud instance

On Fri, 5 Feb 2021 at 18:02, Michele Valotti michele.valotti@gmail.com wrote:

Hi all,

I am running long FreeSurfer and after successfully testing it on my local machine I tried to run it on a server (which should however have the same FreeSurfer version and setup), but I am getting this error

mri_convert ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform mri_convert.bin ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform ncopen: filename "./tmp.mri_nu_correct.mni.533/nu1.mnc": Not a netCDF file miopen: MINC package entry point Error opening ./tmp.mri_nu_correct.mni.533/nu1.mnc mincRead(): error reading volume from file ./tmp.mri_nu_correct.mni.533/nu1.mnc $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from ./tmp.mri_nu_correct.mni.533/nu1.mnc... Linux 18e36413df0c 5.4.0-1030-aws #31~18.04.1-Ubuntu SMP Tue Nov 17 10:48:34 UTC 2020 x86_64 GNU/Linux

recon-all -s base_freesurfer exited with ERRORS at Fri Feb 5 17:45:34 UTC 2021

Any idea what the cause of this might be?

Thank you!

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu *MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be* https://secure-web.cisco.com/1mCfElaf-GHUR28hdMxZlLMnqck_FrSjLbtjLeMTGs46qAf... https://secure-web.cisco.com/1JGrZCpBCSuPapkm_HHIatoVooBbQLB65QiBaa7gloZuDTas3F7Jm5NUb0Jh70_kAxkiyAieOo4vj5KWnmyBckkZfLu5nV0KX3Mgw7SIvo89FMuleCURamxNMyNKLld0AulzlbFQN38jsbEpwGx9wGmFPQS4gS9S-eUBjNstDxOMweGNSdRBNhB41QYIdh7qgt-XD01A9MibR5VGK_Izj3WoT1yzm6BsCYIFiFRg95tYg3xA3NqMoGwukf1F2NvrYpc-xnrg8KIrVPxavMFasuA/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu *MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be* https://secure-web.cisco.com/1mCfElaf-GHUR28hdMxZlLMnqck_FrSjLbtjLeMTGs46qAf... https://secure-web.cisco.com/1xs9PzPP9V2FuqxvdDUNBOJ4r4_8Psp1WNP2tVrDYnPLg4T1blP_wTgTNOvBQV4oNdMuIsD2N6iC5HUD1XgKtYuwymDzV_-gfo9Q1vPTy6x0DDdZWi1jfUJlMYtYb2mF1QNQlQZxa1_onIQnw9nrcvd4R2-Y7geTHa4C4IqiOSrQN9jkUXkvGupjRMcqImISZVGktvoiNSnuW8dj7Rn7G79C_d0NzthXmQwu62rTFU6fuQHd5ayefYvgAIPmiQ0PZ-QNRVjGeavlqRXeLvXks8Q/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer

---

Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://secure-web.cisco.com/1mCfElaf-GHUR28hdMxZlLMnqck_FrSjLbtjLeMTGs46qAf...

Hi Michele,

It looks like there is a local MNI install in /opt/minc/1.9.16 that is taking priority over freesurfer. I would suggest rerunning freesurfer without sourcing this local minc.

Best Andrew

From: freesurfer-bounces@nmr.mgh.harvard.edu freesurfer-bounces@nmr.mgh.harvard.edu on behalf of Michele Valotti michele.valotti@gmail.com Date: Monday, February 22, 2021 at 5:42 AM To: Freesurfer support list freesurfer@nmr.mgh.harvard.edu Subject: Re: [Freesurfer] mincRead error

External Email - Use Caution Hi all, I was wondering if anyone had a chance to look at the log to shed some light on this mystery error, or if more info or a different log are needed.

Thank you, Michele

On Fri, 12 Feb 2021 at 10:05, Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> wrote: Hi Andrew, thank you for your help, I have attached the mri_nu_correct log from the base freesurfer directory, let me know if this helps

Michele

On Thu, 11 Feb 2021 at 17:16, Hoopes, Andrew <AHOOPES@mgh.harvard.edumailto:AHOOPES@mgh.harvard.edu> wrote: If you send the mri_nu_correct.mni.log we can figure it out for sure. Andrew

From: freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu <freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> Date: Thursday, February 11, 2021 at 12:07 PM To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu> Subject: Re: [Freesurfer] mincRead error

External Email - Use Caution Hi Andrew, I do think the problem is in the MINC but the minc paths point to the freesurfer installation, so I think it should be running using that

thank you, Michele

On Thu, 11 Feb 2021 at 16:29, Hoopes, Andrew <AHOOPES@mgh.harvard.edumailto:AHOOPES@mgh.harvard.edu> wrote: Hi Michele, I think that’s the problem then. The freesurfer code is written to work with the specific version of minc that we distribute with the release. If possible, you should run freesurfer without setting any MINC paths to your local install to see if that fixes things. Andrew

From: freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu <freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> Date: Thursday, February 11, 2021 at 11:02 AM To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu> Subject: Re: [Freesurfer] mincRead error

External Email - Use Caution Hi Trisanna, thank you for your reply, I am using minc2 (version 1.9.16) but this is the same version I use on my local machine and it does not give any errors there, and SetUpFreesurfer is sourced before exporting MINC paths and variables.

Michele

On Wed, 10 Feb 2021 at 14:57, Trisanna Sprung-Much <trisanna.sprung-much@mail.mcgill.camailto:trisanna.sprung-much@mail.mcgill.ca> wrote:

External Email - Use Caution Hi All

As a frequent user of minctools, I know I’ve had problems in the past if I source minctools before sourcing freesurfer in the same terminal, because freesurfer uses an older version of minctools. Also, freesurfer uses minc1 format not minc2.

Best,

Trisanna Sprung-Much Research Associate McGill University MD Anderson Cancer Centre --

From: <freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of "Hoopes, Andrew" <AHOOPES@mgh.harvard.edumailto:AHOOPES@mgh.harvard.edu> Reply-To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu> Date: Wednesday, February 10, 2021 at 9:54 AM To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu> Subject: Re: [Freesurfer] mincRead error

Can you send the `mri/mri_nu_correct.mni.log` file as well? Have you installed minc tools separately on your local machine and do you have any of these variables set in your default environment?

MNI_DIR MINC_BIN_DIR MINC_LIB_DIR

It’s possible there’s another install of MNI that’s interfering with the freesurfer one. Andrew

From: freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu <freesurfer-bounces@nmr.mgh.harvard.edumailto:freesurfer-bounces@nmr.mgh.harvard.edu> on behalf of Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> Date: Monday, February 8, 2021 at 9:53 AM To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu> Subject: Re: [Freesurfer] mincRead error

External Email - Use Caution attached is the log for the run, the version of mri_convert is the same version on my local machine (where the command runs) and in the cloud instance

On Fri, 5 Feb 2021 at 18:02, Michele Valotti <michele.valotti@gmail.commailto:michele.valotti@gmail.com> wrote: Hi all, I am running long FreeSurfer and after successfully testing it on my local machine I tried to run it on a server (which should however have the same FreeSurfer version and setup), but I am getting this error

mri_convert ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform mri_convert.bin ./tmp.mri_nu_correct.mni.533/nu1.mnc orig_nu.mgz --like orig.mgz --conform ncopen: filename "./tmp.mri_nu_correct.mni.533/nu1.mnc": Not a netCDF file miopen: MINC package entry point Error opening ./tmp.mri_nu_correct.mni.533/nu1.mnc mincRead(): error reading volume from file ./tmp.mri_nu_correct.mni.533/nu1.mnc $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from ./tmp.mri_nu_correct.mni.533/nu1.mnc... Linux 18e36413df0c 5.4.0-1030-aws #31~18.04.1-Ubuntu SMP Tue Nov 17 10:48:34 UTC 2020 x86_64 GNU/Linux

recon-all -s base_freesurfer exited with ERRORS at Fri Feb 5 17:45:34 UTC 2021

Any idea what the cause of this might be? Thank you! _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edumailto:Freesurfer@nmr.mgh.harvard.edu MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurferhttps://secure-web.cisco.com/1JGrZCpBCSuPapkm_HHIatoVooBbQLB65QiBaa7gloZuDTas3F7Jm5NUb0Jh70_kAxkiyAieOo4vj5KWnmyBckkZfLu5nV0KX3Mgw7SIvo89FMuleCURamxNMyNKLld0AulzlbFQN38jsbEpwGx9wGmFPQS4gS9S-eUBjNstDxOMweGNSdRBNhB41QYIdh7qgt-XD01A9MibR5VGK_Izj3WoT1yzm6BsCYIFiFRg95tYg3xA3NqMoGwukf1F2NvrYpc-xnrg8KIrVPxavMFasuA/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edumailto:Freesurfer@nmr.mgh.harvard.edu MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurferhttps://secure-web.cisco.com/1xs9PzPP9V2FuqxvdDUNBOJ4r4_8Psp1WNP2tVrDYnPLg4T1blP_wTgTNOvBQV4oNdMuIsD2N6iC5HUD1XgKtYuwymDzV_-gfo9Q1vPTy6x0DDdZWi1jfUJlMYtYb2mF1QNQlQZxa1_onIQnw9nrcvd4R2-Y7geTHa4C4IqiOSrQN9jkUXkvGupjRMcqImISZVGktvoiNSnuW8dj7Rn7G79C_d0NzthXmQwu62rTFU6fuQHd5ayefYvgAIPmiQ0PZ-QNRVjGeavlqRXeLvXks8Q/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edumailto:Freesurfer@nmr.mgh.harvard.edu MailScanner has detected a possible fraud attempt from "secure-web.cisco.com" claiming to be https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurferhttps://secure-web.cisco.com/1YiRbDWbfoHMWcoEyhd1M0GEGo15ivihUza-ApiYxwAplTWrs2xwWC5seFnZQVm99FwtMgNCulRtaoKUg8-2WWlPz2Gr6nopvrazdBKEyhCSP-5Q92wwxKxp9wgCRULgW244lOMGWwkoZxWJx40-QwWNWzg8Ydm1Ghylsw0shxgg2Z7RGAnN2HAmcCoEvJpcnCpBOBbO0AKbuGthI7WE5t1LC4zM8X0A_CTIF-Pw8NVIbwks3Bu1pOY9tsJ2onO_Hj0qqITsGKY5s9k6Gem3QgQ/https%3A%2F%2Fmail.nmr.mgh.harvard.edu%2Fmailman%2Flistinfo%2Ffreesurfer