Hi,
I have a strange issue I can't figure out. I am currently trying to use the parcellation from Gordon et al. 2014 (http://www.nil.wustl.edu/labs/petersen/Resources.html) to create ROIs for the frontoparietal network. They provided a volume of the parcellation in MNI152 space for public use. I took this volume and applied the mri_vol2surf command to it to create 2 overlays of the parcels, 1 for each hemisphere. The code was:
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o lh.Parcels_fsaverage_111.mgh --hemi lh
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o rh.Parcels_fsaverage_111.mgh --hemi rh
The code ran, but the LH parcels in the volume were transferred to the RH on the surface and vice versa. This is a problem since the parcellation is not symmetric across hemispheres.This is not a problem with the volume either as I looked at it overlayed with the MNI152 brain in fslview and saw that the parcels were on the correct hemisphere. Another problem is that 1 of the frontoparietal parcels, number 24, was not found on the surface of either hemisphere after turning it to a surface. I don't know why this would be the case since there are all cortical parcels.
I have also tried this with a volume ROI that is only located on the left hemisphere. After running essentially the same vol2surf command as above, the ROI only appeared on the RH surface. I am using mri_vol2surf from Freesurfer v6.0.0
Any help would be greatly appreciated. Thank you!
Best, Matthew Defenderfer
Matthew K. Defenderfer B.S. | Graduate Research Assistant
Graduate Biomedical Sciences | Neuroscience
UAB | The University of Alabama at Birmingham
Laboratory of Kristina Visscher, PhD
Department of Neurobiology
CIRC 111 | C: (865) 805-6389
How do you know what is right and left in the volume?
On 12/01/2017 01:59 PM, Defenderfer, Matthew K wrote:
Hi,
I have a strange issue I can't figure out. I am currently trying to use the parcellation from Gordon et al. 2014 (http://www.nil.wustl.edu/labs/petersen/Resources.html) to create ROIs for the frontoparietal network. They provided a volume of the parcellation in MNI152 space for public use. I took this volume and applied the mri_vol2surf command to it to create 2 overlays of the parcels, 1 for each hemisphere. The code was:
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o lh.Parcels_fsaverage_111.mgh --hemi lh
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o rh.Parcels_fsaverage_111.mgh --hemi rh
The code ran, but the LH parcels in the volume were transferred to the RH on the surface and vice versa. This is a problem since the parcellation is not symmetric across hemispheres.This is not a problem with the volume either as I looked at it overlayed with the MNI152 brain in fslview and saw that the parcels were on the correct hemisphere. Another problem is that 1 of the frontoparietal parcels, number 24, was not found on the surface of either hemisphere after turning it to a surface. I don't know why this would be the case since there are all cortical parcels.
I have also tried this with a volume ROI that is only located on the left hemisphere. After running essentially the same vol2surf command as above, the ROI only appeared on the RH surface. I am using mri_vol2surf from Freesurfer v6.0.0
Any help would be greatly appreciated. Thank you!
Best, Matthew Defenderfer
*Matthew K. Defenderfer B.S. | Graduate Research Assistant*
Graduate Biomedical Sciences|Neuroscience
UAB | The University of Alabama at Birmingham
Laboratory of Kristina Visscher, PhD
Department of Neurobiology
CIRC 111 | C: (865) 805-6389
Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
Hi Doug,
FSLView gives a label of L and R and the parcels on the LH in fslview match the LH parcels in their included Excel spreadsheet. That's really all the verification I have for it right now. It's possible they switched the hemispheres when they made the original parcellation volume before making the excel sheet, but I don't know how likely that is. Is there anything I can do to help out with this?
-Matt
Matthew K. Defenderfer B.S. | Graduate Research Assistant
Graduate Biomedical Sciences | Neuroscience
UAB | The University of Alabama at Birmingham
Laboratory of Kristina Visscher, PhD
Department of Neurobiology
CIRC 111 | C: (865) 805-6389
________________________________ From: freesurfer-bounces@nmr.mgh.harvard.edu freesurfer-bounces@nmr.mgh.harvard.edu on behalf of Douglas N Greve greve@nmr.mgh.harvard.edu Sent: Monday, December 4, 2017 11:46:27 AM To: freesurfer@nmr.mgh.harvard.edu Subject: Re: [Freesurfer] mri_vol2surf wrong hemisphere
How do you know what is right and left in the volume?
On 12/01/2017 01:59 PM, Defenderfer, Matthew K wrote:
Hi,
I have a strange issue I can't figure out. I am currently trying to use the parcellation from Gordon et al. 2014 (http://www.nil.wustl.edu/labs/petersen/Resources.html) to create ROIs for the frontoparietal network. They provided a volume of the parcellation in MNI152 space for public use. I took this volume and applied the mri_vol2surf command to it to create 2 overlays of the parcels, 1 for each hemisphere. The code was:
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o lh.Parcels_fsaverage_111.mgh --hemi lh
mri_vol2surf --mov Parcels_MNI_111.nii --trgsubject fsaverage --mni152reg --o rh.Parcels_fsaverage_111.mgh --hemi rh
The code ran, but the LH parcels in the volume were transferred to the RH on the surface and vice versa. This is a problem since the parcellation is not symmetric across hemispheres.This is not a problem with the volume either as I looked at it overlayed with the MNI152 brain in fslview and saw that the parcels were on the correct hemisphere. Another problem is that 1 of the frontoparietal parcels, number 24, was not found on the surface of either hemisphere after turning it to a surface. I don't know why this would be the case since there are all cortical parcels.
I have also tried this with a volume ROI that is only located on the left hemisphere. After running essentially the same vol2surf command as above, the ROI only appeared on the RH surface. I am using mri_vol2surf from Freesurfer v6.0.0
Any help would be greatly appreciated. Thank you!
Best, Matthew Defenderfer
*Matthew K. Defenderfer B.S. | Graduate Research Assistant*
Graduate Biomedical Sciences|Neuroscience
UAB | The University of Alabama at Birmingham
Laboratory of Kristina Visscher, PhD
Department of Neurobiology
CIRC 111 | C: (865) 805-6389
Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
-- Douglas N. Greve, Ph.D. MGH-NMR Center greve@nmr.mgh.harvard.edu Phone Number: 617-724-2358 Fax: 617-726-7422
Bugs: surfer.nmr.mgh.harvard.edu/fswiki/BugReporting FileDrop: https://gate.nmr.mgh.harvard.edu/filedrop2 www.nmr.mgh.harvard.edu/facility/filedrop/index.htmlhttp://www.nmr.mgh.harvard.edu/facility/filedrop/index.html Outgoing: ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/
_______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail.
freesurfer@nmr.mgh.harvard.edu
-
Defenderfer, Matthew K -
Douglas N Greve