Hi again,
interestingly, if I run the same command using the full fsvol path I get the 'Disk quota exceeded' message... I wonder if even the message I wrote you about in my previous email has something to do with disk space.
I will try free up some room and try spmregister again! Marco
bash-4.1$ spmregister --mov "$file".nii --s PBR_"$subj" --reg tmp.dat --fsvol /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz mkdir: cannot create directory `./tmp.spmreg.11238': Disk quota exceeded Log file is ./spmregister.log Fri Jul 26 11:21:20 EDT 2013 tee: ./spmregister.log: Disk quota exceeded --mov rsl_CLBP001_f1_1_3627_5427_nas_suv.nii --s PBR_CLBP001 --reg tmp.dat --fsvol /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz tee: ./spmregister.log: Disk quota exceeded $Id: spmregister,v 1.39.2.1 2012/10/30 20:05:17 greve Exp $ tee: ./spmregister.log: Disk quota exceeded matlab matlab tee: ./spmregister.log: Disk quota exceeded fmt nii tee: ./spmregister.log: Disk quota exceeded UseSPMGetSpace 1 tee: ./spmregister.log: Disk quota exceeded ERROR: /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri//autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz.mgz not found in either COR or MGZ formats
Hello Doug,
I am encountering the error below when running spmregister. Where do you think is the issue? Thanks!
Best, Marco
bash-4.1$ spmregister --mov "$file".nii --s PBR_"$subj" --reg tmp.dat --fsvol merged.lrrev
Log file is ./spmregister.log Fri Jul 26 10:52:49 EDT 2013 --mov rsl_CLBP001_f1_1_3627_5427_nas_suv.nii --s PBR_CLBP001 --reg tmp.dat --fsvol merged.lrrev $Id: spmregister,v 1.39.2.1 2012/10/30 20:05:17 greve Exp $ matlab matlab fmt nii UseSPMGetSpace 1
/autofs/cluster/hookerlab/Studies/PBR/Marco/CLBP001/PET/Sum_single_frame/PET_recon_SUV/rsl_files mri_convert /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz ./tmp.spmreg.10617/refvol.spmregister.nii -ic 0 0 0 mri_convert /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz ./tmp.spmreg.10617/refvol.spmregister.nii -ic 0 0 0 $Id: mri_convert.c,v 1.179.2.7 2012/09/05 21:55:16 mreuter Exp $ reading from /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz... TR=2530.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0.0414768, -0.991189, -0.125791) j_ras = (-0.0799847, 0.128789, -0.988441) k_ras = (-0.995933, 0.030936, 0.084622) writing to ./tmp.spmreg.10617/refvol.spmregister.nii...
/autofs/cluster/hookerlab/Studies/PBR/Marco/CLBP001/PET/Sum_single_frame/PET_recon_SUV/rsl_files mri_convert rsl_CLBP001_f1_1_3627_5427_nas_suv.nii ./tmp.spmreg.10617/movvol.spmregister.nii -ic 0 0 0 --frame 0 mri_convert rsl_CLBP001_f1_1_3627_5427_nas_suv.nii ./tmp.spmreg.10617/movvol.spmregister.nii -ic 0 0 0 --frame 0 $Id: mri_convert.c,v 1.179.2.7 2012/09/05 21:55:16 mreuter Exp $ reading from rsl_CLBP001_f1_1_3627_5427_nas_suv.nii... TR=0.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (1, 0, 0) j_ras = (0, -1, 0) k_ras = (0, 0, -1) keeping frame 0 writing to ./tmp.spmreg.10617/movvol.spmregister.nii... Matlab file is ./tmp.spmreg.10617/spmregister.10617.m monly = 0; targvol = './tmp.spmreg.10617/refvol.spmregister.nii'; srcvol = './tmp.spmreg.10617/movvol.spmregister.nii'; errfile = './tmp.spmreg.10617/spmregister.10617.err'; fmt = 'nii';
if(exist('spm_coreg') ~= 2) fprintf('ERROR: cannot find spm_coreg.m. Make sure that the SPM\n'); fprintf(' package is in your matlab path (check ~/matlab/startup)\n'); fp = fopen(errfile,'w'); fprintf(fp,'ERROR: cannot find spm_coreg.m. Make sure that the SPM\n'); fprintf(fp,' package is in your matlab path (check ~/matlab/startup)\n'); fclose(fp); return; quit; end
fprintf('fmt %s\n',fmt); which spm_coreg
% This is a hack to try to determine which version of spm is being run. If % spm8 is being run with analyze as input, a left-right reveral will occur. % This searches for "spm8" in the spm path, not perfect, but hopefully good % enough. It does not appear that spm offers a "version" command. IsSPM8 = length(findstr(dirname(which('spm_coreg')),'spm8')); if(IsSPM8 & strcmp(fmt,'img')) fprintf('\n\n'); fprintf('ERROR: you appear to be using spm8. If so, re-run this with --nii\n'); fprintf('\n\n'); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: you appear to be using spm8. If so, re-run this with --nii\n'); fclose(fp); return; quit; exit; % These do nothing when run from a csh script end
global defaults spm_defaults % load spm2's default fields
fprintf('INFO: Assuming RAS coordinate system\n'); defaults.analyze.flip = 0;
%=========================================================================== % coregistration defaults %===========================================================================
defaults.coreg.estimate.cost_fun = 'nmi'; defaults.coreg.estimate.sep = [4 2]; defaults.coreg.estimate.tol = [0.02 0.02 0.02 0.001 0.001 0.001 0.01 0.01 0.01 0.001 0.001 0.001]; defaults.coreg.estimate.fwhm = [7 7]; defaults.coreg.estimate.params = [0 0 0 0 0 0]; defaults.coreg.estimate.graphics = 0; % dont crate ps file
%=========================================================================== % coregister files %===========================================================================
disp(sprintf('using %s as the target image',targvol)); disp(sprintf('using %s as the source image',srcvol));
[pth1,nam1,ext1] = fileparts(deblank(targvol)); [pth2,nam2,ext2] = fileparts(deblank(srcvol));
%tmp = spm_get('Files',pth1,[nam1 ext1]); tmp = sprintf('%s/%s%s',pth1,nam1,ext1); VG = spm_vol(tmp); % target image if(isempty(VG)) fprintf('ERROR: loading target %s\n',targvol); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: loading target %s\n',targvol); fclose(fp); return; quit; end % tmp = spm_get('Files',pth2,[nam2 ext2]) tmp = sprintf('%s/%s%s',pth2,nam2,ext2); VF = spm_vol(tmp); % source image if(isempty(VF)) fprintf('ERROR: loading source %s\n',srcvol); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: loading source %s\n',srcvol); fclose(fp); return; quit; end
fprintf('\n\nINFO: ignore warnings about scalefactor\n\n');
disp('determining coregistration parameters...')
tic; try x = spm_coreg(VG.fname,VF.fname,defaults.coreg.estimate); catch ME fprintf('ERROR: spm_coreg\n'); ME fp = fopen(errfile,'a'); fprintf(fp,'ERROR: spm_coreg (catch)\n'); fprintf(fp,'%s\n',which('spm_coreg')); fprintf(fp,'%s\n',ME.message); fclose(fp); return; quit; end if(isempty(x)) fprintf('ERROR: spm_coreg\n'); if(~monly) fp = fopen(errfile,'a'); fprintf(fp,'ERROR: spm_coreg, x is empty\n'); fclose(fp); return; quit; end end fprintf('Finished after %g sec\n',toc);
fprintf('Parameters '); fprintf('%g ',x); fprintf('\n');
%---------write out the .mat file---see spm_coreg_ui.m line 283
M = inv(spm_matrix(x));
if(1) fprintf('Using spm_get_space\n'); MM = zeros(4,4,1); MM = spm_get_space(deblank(VF.fname)); spm_get_space(deblank(VF.fname), M*MM); fprintf('\n\nINFO: ignore warnings about scalefactor\n\n'); else fprintf('Using MRIread/write instead of spm_get_space\n'); ff = MRIread(deblank(VF.fname)); ff.vox2ras1 = M*ff.vox2ras1; ff.vox2ras0 = vox2ras_1to0(ff.vox2ras1); ff.vox2ras = ff.vox2ras0; MRIwrite(ff,deblank(VF.fname)); end
return; if(~monly) quit; end
Warning: Unable to open display 'iconic'. You will not be able to display graphics on the screen. Warning: No window system found. Java option 'MWT' ignored
< M A T L A B (R) > Copyright 1984-2012 The MathWorks, Inc. R2012a (7.14.0.739) 64-bit (glnxa64) February 9, 2012To get started, type one of these: helpwin, helpdesk, or demo. For product information, visit www.mathworks.com.
> >> >> >> >> >> >> fmt nii
/autofs/space/lyon_009/pubsw/common/spm/spm8/spm_coreg.m
> >> >> >> >> >> >> >> Direct calls to spm_defauts are deprecated.
Please use spm('Defaults',modality) or spm_get_defaults instead.
INFO: Assuming RAS coordinate system
> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> using
./tmp.spmreg.10617/refvol.spmregister.nii as the target image
using ./tmp.spmreg.10617/movvol.spmregister.nii as the source image
> >> >> >> >> Error using read_hdr (line 35)
Error reading header file "./tmp.spmreg.10617/refvol.spmregister.nii"
Error in nifti (line 27) vol = read_hdr(fname);
Error in spm_vol_nifti (line 16) N = nifti(fname);
Error in spm_vol>subfunc (line 136) V = spm_vol_nifti(p);
Error in spm_vol>subfunc1 (line 84) v = subfunc(P(i,:));
Error in spm_vol>subfunc2 (line 70) V = subfunc1(P);
Error in spm_vol (line 54) V = subfunc2(P);
Undefined function or variable 'VG'.
> Error using read_hdr (line 35)
Error reading header file "./tmp.spmreg.10617/movvol.spmregister.nii"
Error in nifti (line 27) vol = read_hdr(fname);
Error in spm_vol_nifti (line 16) N = nifti(fname);
Error in spm_vol>subfunc (line 136) V = spm_vol_nifti(p);
Error in spm_vol>subfunc1 (line 84) v = subfunc(P(i,:));
Error in spm_vol>subfunc2 (line 70) V = subfunc1(P);
Error in spm_vol (line 54) V = subfunc2(P);
Undefined function or variable 'VF'.
INFO: ignore warnings about scalefactor
determining coregistration parameters...
> ERROR: spm_coreg
ME =
MException
Properties: identifier: 'MATLAB:undefinedVarOrFunction' message: 'Undefined variable "VG" or function "VG.fname".' cause: {} stack: [0x1 struct]
Error using fclose Invalid file identifier. Use fopen to generate a valid file identifier.
Undefined function or variable 'x'.
Finished after 0.188717 sec
Parameters >> Undefined function or variable 'x'.
> >> Undefined function or variable 'x'.
Using spm_get_space
Undefined variable "VF" or function "VF.fname".
> ERROR: matlab exited with errors
ERROR: spmregister exited with errors
Marco L. Loggia, PhD Postdoctoral Fellow, Mass General Hospital & Brigham and Women's Hospital Harvard Medical School
Psychiatric Neuroimaging Research Program CNY Building 120, suite 100 Charlestown, Massachusetts 02129 Phone: (617) 643-7267 Fax: (617) 643-7340 marco@nmr.mgh.harvard.edu
______________________
Marco L. Loggia, PhD Postdoctoral Fellow, Mass General Hospital & Brigham and Women's Hospital Harvard Medical School
Psychiatric Neuroimaging Research Program CNY Building 120, suite 100 Charlestown, Massachusetts 02129 Phone: (617) 643-7267 Fax: (617) 643-7340 marco@nmr.mgh.harvard.edu
That probably just means that you have run out of space in the directory you are running it from. Run quota -v to see doug
On 7/26/13 11:27 AM, Marco Loggia wrote:
Hi again,
interestingly, if I run the same command using the full fsvol path I get the 'Disk quota exceeded' message... I wonder if even the message I wrote you about in my previous email has something to do with disk space.
I will try free up some room and try spmregister again! Marco
bash-4.1$ spmregister --mov "$file".nii --s PBR_"$subj" --reg tmp.dat --fsvol /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz mkdir: cannot create directory `./tmp.spmreg.11238': Disk quota exceeded Log file is ./spmregister.log Fri Jul 26 11:21:20 EDT 2013 tee: ./spmregister.log: Disk quota exceeded --mov rsl_CLBP001_f1_1_3627_5427_nas_suv.nii --s PBR_CLBP001 --reg tmp.dat --fsvol /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz tee: ./spmregister.log: Disk quota exceeded $Id: spmregister,v 1.39.2.1 2012/10/30 20:05:17 greve Exp $ tee: ./spmregister.log: Disk quota exceeded matlab matlab tee: ./spmregister.log: Disk quota exceeded fmt nii tee: ./spmregister.log: Disk quota exceeded UseSPMGetSpace 1 tee: ./spmregister.log: Disk quota exceeded ERROR: /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri//autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz.mgz not found in either COR or MGZ formats
Hello Doug,
I am encountering the error below when running spmregister. Where do you think is the issue? Thanks!
Best, Marco
bash-4.1$ spmregister --mov "$file".nii --s PBR_"$subj" --reg tmp.dat --fsvol merged.lrrev
Log file is ./spmregister.log Fri Jul 26 10:52:49 EDT 2013 --mov rsl_CLBP001_f1_1_3627_5427_nas_suv.nii --s PBR_CLBP001 --reg tmp.dat --fsvol merged.lrrev $Id: spmregister,v 1.39.2.1 2012/10/30 20:05:17 greve Exp $ matlab matlab fmt nii UseSPMGetSpace 1
/autofs/cluster/hookerlab/Studies/PBR/Marco/CLBP001/PET/Sum_single_frame/PET_recon_SUV/rsl_files mri_convert /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz ./tmp.spmreg.10617/refvol.spmregister.nii -ic 0 0 0 mri_convert /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz ./tmp.spmreg.10617/refvol.spmregister.nii -ic 0 0 0 $Id: mri_convert.c,v 1.179.2.7 2012/09/05 21:55:16 mreuter Exp $ reading from /autofs/cluster/vitaly/marco/PBR28/data/fs/PBR_CLBP001/mri/merged.lrrev.mgz... TR=2530.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0.0414768, -0.991189, -0.125791) j_ras = (-0.0799847, 0.128789, -0.988441) k_ras = (-0.995933, 0.030936, 0.084622) writing to ./tmp.spmreg.10617/refvol.spmregister.nii...
/autofs/cluster/hookerlab/Studies/PBR/Marco/CLBP001/PET/Sum_single_frame/PET_recon_SUV/rsl_files mri_convert rsl_CLBP001_f1_1_3627_5427_nas_suv.nii ./tmp.spmreg.10617/movvol.spmregister.nii -ic 0 0 0 --frame 0 mri_convert rsl_CLBP001_f1_1_3627_5427_nas_suv.nii ./tmp.spmreg.10617/movvol.spmregister.nii -ic 0 0 0 --frame 0 $Id: mri_convert.c,v 1.179.2.7 2012/09/05 21:55:16 mreuter Exp $ reading from rsl_CLBP001_f1_1_3627_5427_nas_suv.nii... TR=0.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (1, 0, 0) j_ras = (0, -1, 0) k_ras = (0, 0, -1) keeping frame 0 writing to ./tmp.spmreg.10617/movvol.spmregister.nii... Matlab file is ./tmp.spmreg.10617/spmregister.10617.m monly = 0; targvol = './tmp.spmreg.10617/refvol.spmregister.nii'; srcvol = './tmp.spmreg.10617/movvol.spmregister.nii'; errfile = './tmp.spmreg.10617/spmregister.10617.err'; fmt = 'nii';
if(exist('spm_coreg') ~= 2) fprintf('ERROR: cannot find spm_coreg.m. Make sure that the SPM\n'); fprintf(' package is in your matlab path (check ~/matlab/startup)\n'); fp = fopen(errfile,'w'); fprintf(fp,'ERROR: cannot find spm_coreg.m. Make sure that the SPM\n'); fprintf(fp,' package is in your matlab path (check ~/matlab/startup)\n'); fclose(fp); return; quit; end
fprintf('fmt %s\n',fmt); which spm_coreg
% This is a hack to try to determine which version of spm is being run. If % spm8 is being run with analyze as input, a left-right reveral will occur. % This searches for "spm8" in the spm path, not perfect, but hopefully good % enough. It does not appear that spm offers a "version" command. IsSPM8 = length(findstr(dirname(which('spm_coreg')),'spm8')); if(IsSPM8 & strcmp(fmt,'img')) fprintf('\n\n'); fprintf('ERROR: you appear to be using spm8. If so, re-run this with --nii\n'); fprintf('\n\n'); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: you appear to be using spm8. If so, re-run this with --nii\n'); fclose(fp); return; quit; exit; % These do nothing when run from a csh script end
global defaults spm_defaults % load spm2's default fields
fprintf('INFO: Assuming RAS coordinate system\n'); defaults.analyze.flip = 0;
%=========================================================================== % coregistration defaults %===========================================================================
defaults.coreg.estimate.cost_fun = 'nmi'; defaults.coreg.estimate.sep = [4 2]; defaults.coreg.estimate.tol = [0.02 0.02 0.02 0.001 0.001 0.001 0.01 0.01 0.01 0.001 0.001 0.001]; defaults.coreg.estimate.fwhm = [7 7]; defaults.coreg.estimate.params = [0 0 0 0 0 0]; defaults.coreg.estimate.graphics = 0; % dont crate ps file
%=========================================================================== % coregister files %===========================================================================
disp(sprintf('using %s as the target image',targvol)); disp(sprintf('using %s as the source image',srcvol));
[pth1,nam1,ext1] = fileparts(deblank(targvol)); [pth2,nam2,ext2] = fileparts(deblank(srcvol));
%tmp = spm_get('Files',pth1,[nam1 ext1]); tmp = sprintf('%s/%s%s',pth1,nam1,ext1); VG = spm_vol(tmp); % target image if(isempty(VG)) fprintf('ERROR: loading target %s\n',targvol); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: loading target %s\n',targvol); fclose(fp); return; quit; end % tmp = spm_get('Files',pth2,[nam2 ext2]) tmp = sprintf('%s/%s%s',pth2,nam2,ext2); VF = spm_vol(tmp); % source image if(isempty(VF)) fprintf('ERROR: loading source %s\n',srcvol); fp = fopen(errfile,'a'); fprintf(fp,'ERROR: loading source %s\n',srcvol); fclose(fp); return; quit; end
fprintf('\n\nINFO: ignore warnings about scalefactor\n\n');
disp('determining coregistration parameters...')
tic; try x = spm_coreg(VG.fname,VF.fname,defaults.coreg.estimate); catch ME fprintf('ERROR: spm_coreg\n'); ME fp = fopen(errfile,'a'); fprintf(fp,'ERROR: spm_coreg (catch)\n'); fprintf(fp,'%s\n',which('spm_coreg')); fprintf(fp,'%s\n',ME.message); fclose(fp); return; quit; end if(isempty(x)) fprintf('ERROR: spm_coreg\n'); if(~monly) fp = fopen(errfile,'a'); fprintf(fp,'ERROR: spm_coreg, x is empty\n'); fclose(fp); return; quit; end end fprintf('Finished after %g sec\n',toc);
fprintf('Parameters '); fprintf('%g ',x); fprintf('\n');
%---------write out the .mat file---see spm_coreg_ui.m line 283
M = inv(spm_matrix(x));
if(1) fprintf('Using spm_get_space\n'); MM = zeros(4,4,1); MM = spm_get_space(deblank(VF.fname)); spm_get_space(deblank(VF.fname), M*MM); fprintf('\n\nINFO: ignore warnings about scalefactor\n\n'); else fprintf('Using MRIread/write instead of spm_get_space\n'); ff = MRIread(deblank(VF.fname)); ff.vox2ras1 = M*ff.vox2ras1; ff.vox2ras0 = vox2ras_1to0(ff.vox2ras1); ff.vox2ras = ff.vox2ras0; MRIwrite(ff,deblank(VF.fname)); end
return; if(~monly) quit; end
Warning: Unable to open display 'iconic'. You will not be able to display graphics on the screen. Warning: No window system found. Java option 'MWT' ignored
< M A T L A B (R) > Copyright 1984-2012 The MathWorks, Inc. R2012a (7.14.0.739) 64-bit (glnxa64) February 9, 2012To get started, type one of these: helpwin, helpdesk, or demo. For product information, visit www.mathworks.com.
>>>>>>>>>>>>>> fmt nii
/autofs/space/lyon_009/pubsw/common/spm/spm8/spm_coreg.m
>>>>>>>>>>>>>>>> Direct calls to spm_defauts are deprecated.
Please use spm('Defaults',modality) or spm_get_defaults instead.
INFO: Assuming RAS coordinate system >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> using
./tmp.spmreg.10617/refvol.spmregister.nii as the target image
using ./tmp.spmreg.10617/movvol.spmregister.nii as the source image
>>>>>>>>>> Error using read_hdr (line 35)
Error reading header file "./tmp.spmreg.10617/refvol.spmregister.nii"
Error in nifti (line 27) vol = read_hdr(fname);
Error in spm_vol_nifti (line 16) N = nifti(fname);
Error in spm_vol>subfunc (line 136) V = spm_vol_nifti(p);
Error in spm_vol>subfunc1 (line 84) v = subfunc(P(i,:));
Error in spm_vol>subfunc2 (line 70) V = subfunc1(P);
Error in spm_vol (line 54) V = subfunc2(P);
Undefined function or variable 'VG'.
>> Error using read_hdr (line 35)
Error reading header file "./tmp.spmreg.10617/movvol.spmregister.nii"
Error in nifti (line 27) vol = read_hdr(fname);
Error in spm_vol_nifti (line 16) N = nifti(fname);
Error in spm_vol>subfunc (line 136) V = spm_vol_nifti(p);
Error in spm_vol>subfunc1 (line 84) v = subfunc(P(i,:));
Error in spm_vol>subfunc2 (line 70) V = subfunc1(P);
Error in spm_vol (line 54) V = subfunc2(P);
Undefined function or variable 'VF'.
INFO: ignore warnings about scalefactor
determining coregistration parameters... >> ERROR: spm_coreg
ME =
MException
Properties: identifier: 'MATLAB:undefinedVarOrFunction' message: 'Undefined variable "VG" or function "VG.fname".' cause: {} stack: [0x1 struct]
Error using fclose Invalid file identifier. Use fopen to generate a valid file identifier.
Undefined function or variable 'x'. Finished after 0.188717 sec
Parameters >> Undefined function or variable 'x'. >>>> Undefined function or variable 'x'. Using spm_get_space
Undefined variable "VF" or function "VF.fname".
>> ERROR: matlab exited with errors
ERROR: spmregister exited with errors
Marco L. Loggia, PhD Postdoctoral Fellow, Mass General Hospital & Brigham and Women's Hospital Harvard Medical School
Psychiatric Neuroimaging Research Program CNY Building 120, suite 100 Charlestown, Massachusetts 02129 Phone: (617) 643-7267 Fax: (617) 643-7340 marco@nmr.mgh.harvard.edu
Marco L. Loggia, PhD Postdoctoral Fellow, Mass General Hospital & Brigham and Women's Hospital Harvard Medical School
Psychiatric Neuroimaging Research Program CNY Building 120, suite 100 Charlestown, Massachusetts 02129 Phone: (617) 643-7267 Fax: (617) 643-7340 marco@nmr.mgh.harvard.edu _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
freesurfer@nmr.mgh.harvard.edu
-
Douglas Greve -
Marco Loggia