Freesurfer

freesurfer@nmr.mgh.harvard.edu

30132 discussions

Editing Criterion
by R Duke 17 Jun '13

17 Jun '13

Hello Freesurfer Experts, I am relatively new to FS'r and was wondering if there were any references I could use to establish criteria for editing my results (pial surface, GM, and WM classifications). I am using two MPRAGE files (which gives me great results), but still would like to do some manual editing. Is this just left to the users discretion or would you all recommend a validated method that has been published? Cheers, R. Duke

2 1

correlation analysis
by stdp82＠virgilio.it 17 Jun '13

17 Jun '13

Hi list, I have performed cortical thickness analysis and I have individuated a ROI. Now, I'd like to perform a correlation analysis by qdec (if possible) between cortical thickness in this ROI and neuropsychological test score. I'm reading some previous post such as http://www.mail-archive.com/freesurfer@nmr.mgh.harvard.edu/msg12683.html,but I do not understand the passages that I should do. Please, may you briefly schematize the operation that I should do? Thank you very much, Stefano

1 0

Re: [Freesurfer] SPM ROI to Cortical Thickness
by McMains, Stephanie 17 Jun '13

17 Jun '13

I am wondering why you didn't tell them to go through fsvarege space? I thought that was an easy way to go from SPM MNI to freesurfer land. tksurfer fsaverage lh inflated -aparc -mni152reg -overlay /pathname/to/spm/roi/yourfile.img I am wondering because when I look at the segmentation for fsaverage, it seems like it is missing a lot of the gray matter, particularly in the big sulci, most likely from the 'smoothing' that comes with averaging subjects together. And therefore I wonder if this is the best thing to use as an intermediate step. Are you instead suggesting (as it seemed like in this thread), to put the SPM roi into individual subject space and then somehow project it to the surface in free surfer? Thanks, Stephanie +++++++++++++++++++++++++ Stephanie McMains Neuroimaging Staff Scientist Center for Brain Science Harvard University 52 Oxford Street Cambridge, MA 02138 +++++++++++++++++++++++++ For answers to frequently asked questions: http://cbs.fas.harvard.edu/science/core-facilities/neuroimaging/information…

4 5

Visual Word Form Area and cortical thickness
by Garikoitz Lerma-Usabiaga 17 Jun '13

17 Jun '13

Hi list, I am interested in a Cortical Thickness analysis in the Visual Word Form Area. I have been suggested to use a MNI152 coordinate and make an sphere (circle in this case) of 5mm around it. Has anybody got any experience or any recommendation on how to establish the visual word form area for CT in freesurfer? many thanks in advance, Gari

1 0

20130617 Stelle_postdoc_fMRT_EEG.docx
by Direktion, Institut f. Schlaganfall- und Demenzforschung 17 Jun '13

17 Jun '13

1 0

load annot
by LAOUCHEDI MAKHLOUF 17 Jun '13

17 Jun '13

Hi I loaded an annotation file (that i generated using the command annot2label then label2annot) on a pial surface using tksurfer : tksurfer subj lh pial then i loaded my annotation file (frontal association cortex). is it possible to reload it with a unique color for all the gyri and sulci ? thanks for help

1 0

generate pathstats.overall.txt file from tract volume
by Jayachandra Raghava 16 Jun '13

16 Jun '13

Hello All, Is it possible to generate pathstats.overall.txt file from tract volume? I would like to do some tract statistics on the tract volumes generated by FSL. Best Jay

2 1

(no subject)
by A a 16 Jun '13

16 Jun '13

1 0

Optseq optimizing event design
by fMRI 16 Jun '13

16 Jun '13

Dear Prof Douglas, I asked this before but I would like to understand what I am doing and also need your recommendation. I have three conditions : squeezes at three different levels. My aim is that I want to use spm to enter them as a one condition and then enter the parametric response as a covariate regressor. This will allow me to check the effect of using high low and mid forces using for example the first order effects. I am trying to find the best event design using optseq. I do not mind to make the stimuli close or far away from each other. What I have is tr 2.5 and ntp 174 so the length of the scanner is 435s. I tried different input: Optseq --ntp 174 --tr 2.5 --psdwin 0 20 2.5 --ev 1 3 20 --evc 2 3 20 --evc 3 3 20 --nkeep 1 --tnullmin 2 --nullmax6 The question that I have what are the inputs that I should change in order to get the best design that answer my question? I mean I thought that I should focus in tge nullmin and max. So in this. Case does increasing the null max make the design better. Also in term of the contrast should I look for it as a general term without including any contrast since I will enter them as one condition or should I see the effects of rest [1 1 1] Any tip or advice that I should look at and change? Lastly, if I would like to compare different designs, should I compare just the eff result ? Thanks AS

2 3

Re: [Freesurfer] Fwd: Out of memory problem during selxavg3-sess
by Marcel Falkiewicz 16 Jun '13

16 Jun '13

Thanks Jacek for the advice, I'll try to upgrade to newer MATLAB version, maybe it will manage the memory better. I've got 64 bit versions of everything, so this doesn't really help. I've never considered a 800 timepoint timeseries as a large dataset, other software packages do not seem to be bothered by this, even SPM which is Matlab-based. Doug, I will try to split the dataset as you advised, it will help for sure, but given the fact that this problem occurs often, maybe dataset splitting should be automated in fsfast in order to avoid such problems in the future. Thanks again for your help guys. 2013/6/13 Jonca, Jacek <jacek.jonca(a)ttu.edu> > In the past (for other people) selxavg3 failed with as much as 16GBs > although as always much depends on your dataset. Most likely the problem is > not with the fact that you don't have enough memory but rather that not > enough memory is being allocated to Matlab. Are you running it on a 64-bit > machine with 64-bit version of Ubuntu installed and 64-bit version of > Matlab? If not this may be your best bet right now. In addition, as always > having most up-to-date version of both Ubuntu and Matlab may be helpful as > well. I noticed that you are running R2011a, that is a tad bit old. I think > that R2013a has been out for some time.**** > > ** ** > > Do you have access to a cluster where you can deploy freesurfer, Sunsite? > In my experience those tended to work better for running computationally > demanding analyses. I simply rsynced my remote directory with my laptop to > examine results from the laptop but run the actual anayses on the mainframe. > **** > > ** ** > > Cheers, > > Jacek**** > > **** > > [image: cid:image003.png@01CC924F.6F547760]**** > > ** ** > > Jacek Jońca-Jasiński, Ph.D. | The Graduate School | Texas > Tech University**** > > Administration Bldg 327 / 40D | 2625 Memorial Circle | Box 1030 > | Lubbock, TX 79409-1030**** > > ph.: 806.834.3348 | fax: 806.742.4038 | > http://www.gradschool.ttu.edu**** > > [image: Capture]**** > > ** ** > > ** ** > > *From:* freesurfer-bounces(a)nmr.mgh.harvard.edu [mailto: > freesurfer-bounces(a)nmr.mgh.harvard.edu] *On Behalf Of *Marcel Falkiewicz > *Sent:* Thursday, June 13, 2013 1:19 PM > *To:* freesurfer(a)nmr.mgh.harvard.edu > *Subject:* [Freesurfer] Fwd: Out of memory problem during selxavg3-sess*** > * > > ** ** > > ** ** > > Hello,**** > > I know this problem has been discussed earlier, but I think in my case > the source of the problem might be quite different. I'm running FS 5.3.0 > and MATLAB R2011a on Ubuntu machine with 12 GB RAM. selxavg3-sess runs > perfectly for both hemis, but I get the following error when trying to run > it on subcortical volume: > > $Id: fast_selxavg3.m,v 1.100.2.2 2012/11/30 18:40:38 greve Exp $ > /home/marcel/freesurfer/fsfast/toolbox/fast_selxavg3.m > /home/marcel/freesurfer/fsfast/toolbox/fast_ldanaflac.m > /home/marcel/freesurfer/matlab/MRIread.m > ------------------------- > outtop = /media/2TB/SDT_MRI/FS > Extension format = nii.gz > 1 DC_vs_HC.mat > 2 HI_vs_DC.mat > 3 HI_vs_HC.mat > 4 NAT_vs_PAL.mat > 5 NAT_vs_PAT.mat > 6 PAL_vs_NAT.mat > 7 PAL_vs_PAT.mat > nruns = 1 > autostimdur = > > > outanadir = /media/2TB/SDT_MRI/FS/AC1004/bold/sdt.sm8.mni > Found 52644/537168 ( 9.8) voxels in mask > Creating Design Matrix > ... creation time = 0.007 sec > DoMCFit = 1 > ntptot = 851, nX = 19, DOF = 832 > Saving X matrix to /media/2TB/SDT_MRI/FS/AC1004/bold/sdt.sm8.mni/Xtmp.mat > XCond = 31.0456 (normalized) > Computing compensation for resdual AR1 bias > 1 -0.5 -0.500489 (t=0.097569) > 2 -0.25 -0.255326 (t=0.427178) > 3 0 -0.011955 (t=0.516085) > 4 0.25 0.229273 (t=0.839369) > 5 0.5 0.466983 (t=0.928175) > AR1 Correction M: 0.0147777 1.03322 > Computing contrast matrices > OLS Beta Pass > run 1 t= 0.0 > Global Mean 1120.98 > Global In-Mask Mean = 1120.98 (983.432) > Rescale Target = 100 > RescaleFactor = 0.0892077 > OLS Residual Pass > run 1 t= 0.0 > ??? Out of memory. Type HELP MEMORY for your options. > > Error in ==> fast_selxavg3 at 489 > rsserun = sum(rrun.^2); > > >> ------------------------------------------ > > **** > > I observed memory consuption with top(8) and noticed that around 11 GBs > are eaten after about 30 second of running OLS residual pass. Do you think > adding more memory to the PC would solve the problem, or is it some > MATLAB/FS-related bug?**** > > Best regards, > Marcel**** > > ** ** >

2 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer