Freesurfer

freesurfer@nmr.mgh.harvard.edu

17 participants
30130 discussions

Fwd: Re: [Freesurfer] mri_normalize
by Sasha Wolosin 09 Sep '05

09 Sep '05

Sasha Wolosin Research Assistant Developmental Cognitive Neurology Kennedy Krieger Institute 707 N. Broadway Baltimore, MD 21205 ph: (443) 923-9270

1 0

mri_normalize
by Sasha Wolosin 09 Sep '05

09 Sep '05

I am still having problems with mri_normalize. I have downloaded the latest snapshot- but I still get an error: [wolosin@localhost mri]$ mri_normalize orig.mgz T1.mgz reading from orig.mgz... normalizing image... talairach transform 1.103 0.048 -0.007 -4.504; -0.051 1.166 0.004 -13.012; 0.007 -0.003 1.090 -15.454; 0.000 0.000 0.000 1.000; INFO: Modifying talairach volume c_(r,a,s) based on average_305 building Voronoi diagram... performing soap bubble smoothing... 3d normalization pass 1 of 2 white matter peak found at 110 Segmentation fault I thought it might be a problem with the talairach transform, but I can't figure out how to view this properly. [wolosin@localhost subjects]$ tkregister2 --mgz --s 2335 --fstal --surf orig.mgz surfname set to orig.mgz INFO: no target volume specified, assuming FreeSurfer orig volume. target volume orig movable volume (null) reg file (null) LoadVol 1 $Id: tkregister2.c,v 1.35 2005/07/12 19:50:28 greve Exp $ Diagnostic Level -1 talairach.xfm --------------------- 1.103 0.048 -0.007 -4.504; -0.051 1.166 0.004 -13.012; 0.007 -0.003 1.090 -15.454; 0.000 0.000 0.000 1.000; ERROR: cannot determine type of /home/wolosin/subjects/talairach/mri/orig Do you know what I am missing? Any advice is greatly appreciated, Thanks, Sasha Sasha Wolosin Research Assistant Developmental Cognitive Neurology Kennedy Krieger Institute 707 N. Broadway Baltimore, MD 21205 ph: (443) 923-9270 Disclaimer: The materials in this e-mail are private and may contain Protected Health Information. Please note that e-mail is not necessarily confidential or secure. Your use of e-mail constitutes your acknowledgment of these confidentiality and security limitations. If you are not the intended recipient, be advised that any unauthorized use, disclosure, copying, distribution, or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender via telephone or return e-mail.

2 1

center values
by Tracy Wang 09 Sep '05

09 Sep '05

Hi all, I'm trying to find the anatomical center value of the image volume in the mni average_305 space. Any ideas? -Tracy Wang Tracy Wang Research Assistant Cognitive Neuroscience Laboratory Washington University Department of Psychology, Campus Box 1125 One Brookings Drive St. Louis MO 63130-4899 314-935-5019 twang(a)artsci.wustl.edu

2 1

Re: [Freesurfer] segmentation fault during make_average_surface Hello Nick, Thanks for your reply, here are the info: mris_make_average_surface -all-info ProgramName: mris_make_average_surface ProgramArguments -all-info ProgramVersion $Name: $ TimeStamp: 05/09/09-07:09:31-GMT CVS: $Id: mris_make_average_surface.c, v 1.9 2004/01/29 14:59:12 tosa Exp $ User: root Machine: ltscopc12 Platform: Linux PlatformVersion: 2.4.21-4 EL CompilerName: GCC CompilerVersion: 29600 cat /etc/redhat-release Red Hat Enterpris
by Marie Schaer 09 Sep '05

09 Sep '05

Hello Nick, Thanks for your reply, here are the info: mris_make_average_surface -all-info ProgramName: mris_make_average_surface ProgramArguments -all-info ProgramVersion $Name: $ TimeStamp: 05/09/09-07:09:31-GMT CVS: $Id: mris_make_average_surface.c,v 1.9 2004/01/29 14:59:12 tosa Exp $ User: root Machine: ltscopc12 Platform: Linux PlatformVersion: 2.4.21-4 EL CompilerName: GCC CompilerVersion: 29600 cat /etc/redhat-release Red Hat Enterprise Linux WS release 3 (Taroon) Thank you very much for your help, Marie On Sep 7, 2005, at 10:55 PM, Nick Schmansky wrote: > Marie, > > It is possible that the version of mris_make_average_surface that you > have is old, and has a bug. Can you tell me the version info? Type: > > mris_make_average_surface -all-info > > And if the -all-info command option is not valid (indicating an old > version), can you type: > > ls -alF mris_make_average_surface > > And what platform are you running on? Type: > > cat /etc/redhat-release > > Nick > > > > On Wed, 2005-09-07 at 11:59 +0200, Marie Schaer wrote: >> >> >> Hello, >> >> I'm trying to make an average surface using the latest version of >> make_average_surface (2005/08/02 19:14:20 nicks Exp), and I got the >> same error >> as posted in the following message: >> http://www.mail-archive.com/freesurfer@nmr.mgh.harvard.edu/ >> msg01135.html, with a >> segmentation fault when mris_average_surface is called (I get the same >> segmentation fault when running mris_average_surface alone): >> >> mris_make_average_surface -i 7 -o orig rh orig_avg sphere.reg >> average_test subj1 >> subj2 >> processing subject subj1... >> The following must be >> revisited******************************************* >> Segmentation fault >> >> >> I did not find in the mailing list how to solve this, thank you very >> much for >> your help, >> >> Marie Schaer >> >> _______________________________________________ >> Freesurfer mailing list >> Freesurfer(a)nmr.mgh.harvard.edu >> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer >> >> >

1 0

mris_euler_number
by Margaret Duff 09 Sep '05

09 Sep '05

Hi, I am running the command recon-all -subjid SM2C4_autoreconall -autorecon2 on troy, with subjects directory being /space/troy/1/users/FREESURFER. I just got this error message, which I have never gotten before: --------------------------------------------- Euler Number rh Fri Sep 9 02:03:07 EDT 2005 /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/scripts /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/mri /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall mris_euler_number /autofs/space/troy_001/users/FREESURFER/SM2C4_autoreconall/surf/rh.orig mris_euler_number: Command not found. ERROR: mris_euler_number exited with non-zero status Linux troy 2.6.6-1.436.2.3smp #1 SMP Fri Jul 9 15:27:18 EDT 2004 i686 i686 i386 GNU/Linux recon-all exited with errors at Fri Sep 9 02:03:08 EDT 2005 Why is the command all of a sudden not found? Thanks, Margaret

2 1

Tksurfer
by Katy Thakkar 09 Sep '05

09 Sep '05

Hi, I'm trying to launch tksurfer with the command tksurfer average7 rh inflated and I'm getting the error message below. I get this message on machines ventzl and nebech. The tksurfer window pops up, but the toolbar is blank. Does anyone know what might be wrong? Thanks! Katy Tix_Init failed: can't find package Itcl 3.2 surfer: using interface /usr/local/freesurfer/beta/lib/tcl/tksurfer.tcl Reading /usr/local/freesurfer/beta/lib/tcl/tkm_common.tcl Reading /usr/local/freesurfer/beta/lib/tcl/tkm_wrappers.tcl Reading /usr/local/freesurfer/beta/lib/tcl/fsgdfPlot.tcl surfer: couldn't dis/enable menu set 0: can't read "glMenuGroups(mg_InflatedVSetLoaded)": no such variable surfer: couldn't dis/enable menu set 1: can't read "glMenuGroups(mg_WhiteVSetLoaded)": no such variable surfer: couldn't dis/enable menu set 2: can't read "glMenuGroups(mg_PialVSetLoaded)": no such variable surfer: couldn't dis/enable menu set 4: can't read "glMenuGroups(mg_TimeCourseLoaded)": no such variable surfer: couldn't dis/enable menu set 5: can't read "glMenuGroups(mg_OverlayLoaded)": no such variable surfer: couldn't dis/enable menu set 6: can't read "glMenuGroups(mg_CurvatureLoaded)": no such variable surfer: couldn't dis/enable menu set 7: can't read "glMenuGroups(mg_LabelLoaded)": no such variable surfer: couldn't dis/enable menu set 8: can't read "glMenuGroups(mg_FieldSignLoaded)": no such variable surfer: couldn't dis/enable menu set 9: can't read "glMenuGroups(mg_FieldMaskLoaded)": no such variable

1 0

RE: [Freesurfer] Intstallation problems on new dev?
by Fornito, Alexander 08 Sep '05

08 Sep '05

Great. Sorry, I'm a but slow on the uptake sometimes :) Thanks for your help! -----Original Message----- From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] Sent: Fri 9/9/2005 9:46 AM To: Fornito, Alexander Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu Subject: RE: [Freesurfer] Intstallation problems on new dev? no, I mean just rerun all the automated steps, and retain your old edits. On Fri, 9 Sep 2005, Fornito, Alexander wrote: > Sorry, when you say "safest thing to do is to rerun everything " do you mean including doing the manual edits again? > I'm doing strcutural studies, so I want to make sure I get it right! > > -----Original Message----- > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > Sent: Fri 9/9/2005 9:36 AM > To: Fornito, Alexander > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > Subject: RE: [Freesurfer] Intstallation problems on new dev? > > > > probably. The safest thing to do is to rerun everything to make sure that > all your subjects were processed in the same way. This probably isn't so > important for functional studies, but can be for structural. > > On Fri, 9 Sep 2005, Fornito, Alexander wrote: > > > I understand. Good to hear I wouldn't have to do all the manual editing again. Would it still take about 24 hours from start to finish, or is much quicker on the re-run? > > > > -----Original Message----- > > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > > Sent: Fri 9/9/2005 9:31 AM > > To: Fornito, Alexander > > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > > Subject: RE: [Freesurfer] Intstallation problems on new dev? > > > > > > > > we just have to test it. We've run the equivalent process many times, > > just not in the recon-all env yet. > > > > On Fri, 9 Sep 2005, Fornito, Alexander > > wrote: > > > > > Do you mean you're not sure if it will work? > > > > > > -----Original Message----- > > > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > > > Sent: Fri 9/9/2005 9:28 AM > > > To: Fornito, Alexander > > > Cc: Bruce Fischl; freesurfer(a)nmr.mgh.harvard.edu > > > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > > > > > > > > > You should be able to run it with -autorecon-all -rerun. Having said that, I don't know that we've actually run it that way. > > > > > > doug > > > > > > > > > Fornito, Alexander wrote: > > > > > > Hi Bruce and Doug, > > > When you say it can be done automatically,does that mean it wouldn't require additional editing? Does it use edits that are already performed (eg., in creating surfaces with the dev version)? > > > If so, do you know how long it would roughly take to re-create them in this way? > > > Thanks again, > > > Alex > > > > > > > > > -----Original Message----- > > > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > > > Sent: Thu 9/8/2005 10:45 PM > > > To: Fornito, Alexander > > > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > > > Subject: RE: [Freesurfer] Intstallation problems on new dev? > > > Hi Alex, > > > > > > you probably want to regenerate everything. Note that this can be done > > > automatically through recon-all (Doug can tell you the switches). > > > > > > cheers, > > > > > > Bruce > > > > > > > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > > > > > > > > > > Seems to be working now. Thanks Doug, you're a lifesaver!! > > > As an aside, will surfaces created using the 20050509 dev version be compatible with those created using the upcoming stable release? > > > > > > -----Original Message----- > > > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > > > Sent: Thu 9/8/2005 1:43 PM > > > To: Fornito, Alexander > > > Cc: freesurfer(a)nmr.mgh.harvard.edu > > > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > > > > > > > > > > > > That's due to a problem I created a few days ago. Fixes are at: > > > > > > ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve > > > > > > doug > > > > > > > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > > > > > Hi, > > > > We've recently installed the freesurfer-Linux-rh9-dev20050905-full.tar.gz distribution on our systems, which run Debian 3.1. I noticed that unpacking the distribution did not place the perl5 directory in $FREESURFER_HOME/lib/mni/lib,as the readme file says it should. I then downloaded the mni-Linux2-2.3-i386.tar.gz and copied the perl5 in to the $FREESURFER_HOME/lib/mni/lib directory, and set the environment appropriately. When I source the environment, I get: > > > > > > > > Setting up environment for FreeSurfer/FS-FAST (and FSL) > > > > FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > > > FSFAST_HOME /usr/local/freesurfer-dev20050905/fsfast > > > > SUBJECTS_DIR /data/flanders/work/alex/freesurfer/subjects > > > > FUNCTIONALS_DIR /usr/local/freesurfer-dev20050905/sessions > > > > MINC_BIN_DIR /usr/local/freesurfer-dev20050905/lib/mni/bin > > > > MINC_LIB_DIR /usr/local/freesurfer-dev20050905/lib/mni/lib > > > > PERL5LIB /usr/local/freesurfer-dev20050905/lib/mni/lib/perl5/5.8.5 > > > > GSL_DIR /usr/local/freesurfer-dev20050905/lib/gsl > > > > QTDIR /usr/local/freesurfer-dev20050905/lib/qt > > > > TCLLIBPATH /usr/local/freesurfer-dev20050905/lib/tcltktixblt/lib > > > > FSL_DIR /usr/local/fsl > > > > > > > > However, when I try to run autorecon, I get a message saying "cmd: Undefined variable." I get this whether the environment is set to link to perl5 in $FREESURFER_HOME/lib/mni/lib/ or in /usr/pubsw/packages/mni/current/lib/. > > > > I don't even know if it's the perl library that's the problem. Could someone please help out? As far as we're aware, all the environments are set correctly, so we're not sure what Undefined variable is referring to. The entire output is below: > > > > > > > > recon-all -autorecon1 -subjid 27_new -hemi lh > > > > INFO: SUBJECTS_DIR is /data/flanders/work/alex/freesurfer/subjects > > > > Actual FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > > > Linux flanders 2.4.26 #2 SMP Tue Dec 14 03:07:23 EST 2004 i686 GNU/Linux > > > > ######################################## > > > > program versions used > > > > $Id: recon-all-nmr,v 1.102 2005/09/02 18:03:58 greve Exp $ > > > > $Id: mri_motion_correct2,v 1.9 2004/12/14 03:37:42 greve Exp $ > > > > mri_convert --version > > > > $ > > > > $Header: /software/source/minc/progs/rawtominc/rawtominc.c,v 6.13.2.2 2005/03/16 19:02:52 bert Exp $ > > > > minctracc.c > > > > $Header: /software/source/registration/mni_autoreg/minctracc/Main/minctracc.c,v 96.11 2004/02/12 05:54:22 rotor Exp $ > > > > $Header: /software/source/minc/progs/mincresample/mincresample.c,v 6.12.2.1 2005/03/16 19:02:51 bert Exp $ > > > > $Header: /software/source/minc/progs/mincaverage/mincaverage.c,v 6.4.2.2 2005/03/16 19:02:49 bert Exp $ > > > > $Id: talairach2,v 1.7 2004/08/31 18:07:37 tosa Exp $ > > > > mri_convert --version > > > > $ > > > > # $Id: mritotal.in,v 1.12 2004/02/12 05:55:18 rotor Exp $ > > > > Program nu_correct, built from: > > > > Package MNI N3, version 1.10, compiled by nicks@martinos01 (i686-pc-linux-gnu) on 2005-08-29 at 19:41:40 > > > > ProgramName: mri_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_normalize.c,v 1.36 2005/08/15 14:05:49 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_watershed ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_watershed.cpp,v 1.34 2005/08/15 14:05:17 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_segment ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_segment.c,v 1.27 2005/08/24 19:48:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_fill ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_fill.c,v 1.94 2005/08/15 14:30:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_tessellate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_tessellate.c,v 1.24 2005/08/18 16:19:10 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_smooth ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_smooth.c,v 1.13 2005/08/15 14:22:53 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_inflate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_inflate.c,v 1.28 2005/08/15 14:23:37 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_fix_topology ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_fix_topology.c,v 1.31 2005/08/15 14:28:43 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_euler_number ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_euler_number.c,v 1.4 2003/09/05 04:45:41 kteich Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_make_surfaces ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_make_surfaces.c,v 1.60 2005/08/22 17:47:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_register.c,v 1.30 2005/08/15 14:24:44 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mrisp_paint ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mrisp_paint.c,v 1.6 2005/02/14 04:30:19 segonne Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_label2label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_label2label.c,v 1.21 2004/11/16 00:35:37 greve Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mris2rgb ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris2rgb.c,v 1.33 2005/06/08 19:45:07 nicks Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_em_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_em_register.c,v 1.50 2005/05/30 20:36:05 xhan Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_ca_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_normalize.c,v 1.31 2005/08/15 14:14:22 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_ca_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_register.c,v 1.34 2005/08/18 13:29:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ProgramName: mri_ca_label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_label.c,v 1.62 2005/08/18 13:29:41 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > > ####################################### > > > > GCA RB40_talairach_2005-07-20.gca > > > > AvgCurvTif average.curvature.filled.buckner40.tif > > > > GCS curvature.buckner40.filled.desikan_killiany.gcs > > > > ####################################### > > > > /data/flanders/work/alex/freesurfer/subjects/27_new > > > > Using COR format > > > > --------------------------------------------- > > > > MotionCor Thu Sep 8 11:59:54 EST 2005 > > > > > > > > INFO: no runs were found in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig/XXX, > > > > however, there is a volume in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig, > > > > so I am just going to proceed with that as the input. > > > > cmd: Undefined variable. > > > > > > > > > > > > _______________________________________________ > > > > Freesurfer mailing list > > > > Freesurfer(a)nmr.mgh.harvard.edu > > > > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > > > > > > > > > > > -- > > > Douglas N. Greve, Ph.D. > > > MGH-NMR Center > > > greve(a)nmr.mgh.harvard.edu > > > Phone Number: 617-724-2358 > > > Fax: 617-726-7422 > > > > > > > > > > > > _______________________________________________ > > > Freesurfer mailing list > > > Freesurfer(a)nmr.mgh.harvard.edu > > > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Douglas N. Greve, Ph.D. > > > MGH-NMR Center > > > greve(a)nmr.mgh.harvard.edu > > > Phone Number: 617-724-2358 > > > Fax: 617-726-7422 > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

RE: [Freesurfer] Intstallation problems on new dev?
by Fornito, Alexander 08 Sep '05

08 Sep '05

Sorry, when you say "safest thing to do is to rerun everything " do you mean including doing the manual edits again? I'm doing strcutural studies, so I want to make sure I get it right! -----Original Message----- From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] Sent: Fri 9/9/2005 9:36 AM To: Fornito, Alexander Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu Subject: RE: [Freesurfer] Intstallation problems on new dev? probably. The safest thing to do is to rerun everything to make sure that all your subjects were processed in the same way. This probably isn't so important for functional studies, but can be for structural. On Fri, 9 Sep 2005, Fornito, Alexander wrote: > I understand. Good to hear I wouldn't have to do all the manual editing again. Would it still take about 24 hours from start to finish, or is much quicker on the re-run? > > -----Original Message----- > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > Sent: Fri 9/9/2005 9:31 AM > To: Fornito, Alexander > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > Subject: RE: [Freesurfer] Intstallation problems on new dev? > > > > we just have to test it. We've run the equivalent process many times, > just not in the recon-all env yet. > > On Fri, 9 Sep 2005, Fornito, Alexander > wrote: > > > Do you mean you're not sure if it will work? > > > > -----Original Message----- > > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > > Sent: Fri 9/9/2005 9:28 AM > > To: Fornito, Alexander > > Cc: Bruce Fischl; freesurfer(a)nmr.mgh.harvard.edu > > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > > > > > You should be able to run it with -autorecon-all -rerun. Having said that, I don't know that we've actually run it that way. > > > > doug > > > > > > Fornito, Alexander wrote: > > > > Hi Bruce and Doug, > > When you say it can be done automatically,does that mean it wouldn't require additional editing? Does it use edits that are already performed (eg., in creating surfaces with the dev version)? > > If so, do you know how long it would roughly take to re-create them in this way? > > Thanks again, > > Alex > > > > > > -----Original Message----- > > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > > Sent: Thu 9/8/2005 10:45 PM > > To: Fornito, Alexander > > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > > Subject: RE: [Freesurfer] Intstallation problems on new dev? > > Hi Alex, > > > > you probably want to regenerate everything. Note that this can be done > > automatically through recon-all (Doug can tell you the switches). > > > > cheers, > > > > Bruce > > > > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > > > > > > Seems to be working now. Thanks Doug, you're a lifesaver!! > > As an aside, will surfaces created using the 20050509 dev version be compatible with those created using the upcoming stable release? > > > > -----Original Message----- > > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > > Sent: Thu 9/8/2005 1:43 PM > > To: Fornito, Alexander > > Cc: freesurfer(a)nmr.mgh.harvard.edu > > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > > > > > > > That's due to a problem I created a few days ago. Fixes are at: > > > > ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve > > > > doug > > > > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > > > Hi, > > > We've recently installed the freesurfer-Linux-rh9-dev20050905-full.tar.gz distribution on our systems, which run Debian 3.1. I noticed that unpacking the distribution did not place the perl5 directory in $FREESURFER_HOME/lib/mni/lib,as the readme file says it should. I then downloaded the mni-Linux2-2.3-i386.tar.gz and copied the perl5 in to the $FREESURFER_HOME/lib/mni/lib directory, and set the environment appropriately. When I source the environment, I get: > > > > > > Setting up environment for FreeSurfer/FS-FAST (and FSL) > > > FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > > FSFAST_HOME /usr/local/freesurfer-dev20050905/fsfast > > > SUBJECTS_DIR /data/flanders/work/alex/freesurfer/subjects > > > FUNCTIONALS_DIR /usr/local/freesurfer-dev20050905/sessions > > > MINC_BIN_DIR /usr/local/freesurfer-dev20050905/lib/mni/bin > > > MINC_LIB_DIR /usr/local/freesurfer-dev20050905/lib/mni/lib > > > PERL5LIB /usr/local/freesurfer-dev20050905/lib/mni/lib/perl5/5.8.5 > > > GSL_DIR /usr/local/freesurfer-dev20050905/lib/gsl > > > QTDIR /usr/local/freesurfer-dev20050905/lib/qt > > > TCLLIBPATH /usr/local/freesurfer-dev20050905/lib/tcltktixblt/lib > > > FSL_DIR /usr/local/fsl > > > > > > However, when I try to run autorecon, I get a message saying "cmd: Undefined variable." I get this whether the environment is set to link to perl5 in $FREESURFER_HOME/lib/mni/lib/ or in /usr/pubsw/packages/mni/current/lib/. > > > I don't even know if it's the perl library that's the problem. Could someone please help out? As far as we're aware, all the environments are set correctly, so we're not sure what Undefined variable is referring to. The entire output is below: > > > > > > recon-all -autorecon1 -subjid 27_new -hemi lh > > > INFO: SUBJECTS_DIR is /data/flanders/work/alex/freesurfer/subjects > > > Actual FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > > Linux flanders 2.4.26 #2 SMP Tue Dec 14 03:07:23 EST 2004 i686 GNU/Linux > > > ######################################## > > > program versions used > > > $Id: recon-all-nmr,v 1.102 2005/09/02 18:03:58 greve Exp $ > > > $Id: mri_motion_correct2,v 1.9 2004/12/14 03:37:42 greve Exp $ > > > mri_convert --version > > > $ > > > $Header: /software/source/minc/progs/rawtominc/rawtominc.c,v 6.13.2.2 2005/03/16 19:02:52 bert Exp $ > > > minctracc.c > > > $Header: /software/source/registration/mni_autoreg/minctracc/Main/minctracc.c,v 96.11 2004/02/12 05:54:22 rotor Exp $ > > > $Header: /software/source/minc/progs/mincresample/mincresample.c,v 6.12.2.1 2005/03/16 19:02:51 bert Exp $ > > > $Header: /software/source/minc/progs/mincaverage/mincaverage.c,v 6.4.2.2 2005/03/16 19:02:49 bert Exp $ > > > $Id: talairach2,v 1.7 2004/08/31 18:07:37 tosa Exp $ > > > mri_convert --version > > > $ > > > # $Id: mritotal.in,v 1.12 2004/02/12 05:55:18 rotor Exp $ > > > Program nu_correct, built from: > > > Package MNI N3, version 1.10, compiled by nicks@martinos01 (i686-pc-linux-gnu) on 2005-08-29 at 19:41:40 > > > ProgramName: mri_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_normalize.c,v 1.36 2005/08/15 14:05:49 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_watershed ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_watershed.cpp,v 1.34 2005/08/15 14:05:17 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_segment ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_segment.c,v 1.27 2005/08/24 19:48:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_fill ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_fill.c,v 1.94 2005/08/15 14:30:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_tessellate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_tessellate.c,v 1.24 2005/08/18 16:19:10 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_smooth ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_smooth.c,v 1.13 2005/08/15 14:22:53 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_inflate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_inflate.c,v 1.28 2005/08/15 14:23:37 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_fix_topology ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_fix_topology.c,v 1.31 2005/08/15 14:28:43 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_euler_number ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_euler_number.c,v 1.4 2003/09/05 04:45:41 kteich Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_make_surfaces ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_make_surfaces.c,v 1.60 2005/08/22 17:47:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_register.c,v 1.30 2005/08/15 14:24:44 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mrisp_paint ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mrisp_paint.c,v 1.6 2005/02/14 04:30:19 segonne Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_label2label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_label2label.c,v 1.21 2004/11/16 00:35:37 greve Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mris2rgb ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris2rgb.c,v 1.33 2005/06/08 19:45:07 nicks Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_em_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_em_register.c,v 1.50 2005/05/30 20:36:05 xhan Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_ca_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_normalize.c,v 1.31 2005/08/15 14:14:22 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_ca_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_register.c,v 1.34 2005/08/18 13:29:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ProgramName: mri_ca_label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_label.c,v 1.62 2005/08/18 13:29:41 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > > ####################################### > > > GCA RB40_talairach_2005-07-20.gca > > > AvgCurvTif average.curvature.filled.buckner40.tif > > > GCS curvature.buckner40.filled.desikan_killiany.gcs > > > ####################################### > > > /data/flanders/work/alex/freesurfer/subjects/27_new > > > Using COR format > > > --------------------------------------------- > > > MotionCor Thu Sep 8 11:59:54 EST 2005 > > > > > > INFO: no runs were found in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig/XXX, > > > however, there is a volume in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig, > > > so I am just going to proceed with that as the input. > > > cmd: Undefined variable. > > > > > > > > > _______________________________________________ > > > Freesurfer mailing list > > > Freesurfer(a)nmr.mgh.harvard.edu > > > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > > > > > > -- > > Douglas N. Greve, Ph.D. > > MGH-NMR Center > > greve(a)nmr.mgh.harvard.edu > > Phone Number: 617-724-2358 > > Fax: 617-726-7422 > > > > > > > > _______________________________________________ > > Freesurfer mailing list > > Freesurfer(a)nmr.mgh.harvard.edu > > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Douglas N. Greve, Ph.D. > > MGH-NMR Center > > greve(a)nmr.mgh.harvard.edu > > Phone Number: 617-724-2358 > > Fax: 617-726-7422 > > > > > > > > > > > > >

2 1

RE: [Freesurfer] Intstallation problems on new dev?
by Fornito, Alexander 08 Sep '05

08 Sep '05

I understand. Good to hear I wouldn't have to do all the manual editing again. Would it still take about 24 hours from start to finish, or is much quicker on the re-run? -----Original Message----- From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] Sent: Fri 9/9/2005 9:31 AM To: Fornito, Alexander Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu Subject: RE: [Freesurfer] Intstallation problems on new dev? we just have to test it. We've run the equivalent process many times, just not in the recon-all env yet. On Fri, 9 Sep 2005, Fornito, Alexander wrote: > Do you mean you're not sure if it will work? > > -----Original Message----- > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > Sent: Fri 9/9/2005 9:28 AM > To: Fornito, Alexander > Cc: Bruce Fischl; freesurfer(a)nmr.mgh.harvard.edu > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > You should be able to run it with -autorecon-all -rerun. Having said that, I don't know that we've actually run it that way. > > doug > > > Fornito, Alexander wrote: > > Hi Bruce and Doug, > When you say it can be done automatically,does that mean it wouldn't require additional editing? Does it use edits that are already performed (eg., in creating surfaces with the dev version)? > If so, do you know how long it would roughly take to re-create them in this way? > Thanks again, > Alex > > > -----Original Message----- > From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] > Sent: Thu 9/8/2005 10:45 PM > To: Fornito, Alexander > Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu > Subject: RE: [Freesurfer] Intstallation problems on new dev? > Hi Alex, > > you probably want to regenerate everything. Note that this can be done > automatically through recon-all (Doug can tell you the switches). > > cheers, > > Bruce > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > > Seems to be working now. Thanks Doug, you're a lifesaver!! > As an aside, will surfaces created using the 20050509 dev version be compatible with those created using the upcoming stable release? > > -----Original Message----- > From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] > Sent: Thu 9/8/2005 1:43 PM > To: Fornito, Alexander > Cc: freesurfer(a)nmr.mgh.harvard.edu > Subject: Re: [Freesurfer] Intstallation problems on new dev? > > > > > That's due to a problem I created a few days ago. Fixes are at: > > ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve > > doug > > > On Thu, 8 Sep 2005, Fornito, Alexander wrote: > > > Hi, > > We've recently installed the freesurfer-Linux-rh9-dev20050905-full.tar.gz distribution on our systems, which run Debian 3.1. I noticed that unpacking the distribution did not place the perl5 directory in $FREESURFER_HOME/lib/mni/lib,as the readme file says it should. I then downloaded the mni-Linux2-2.3-i386.tar.gz and copied the perl5 in to the $FREESURFER_HOME/lib/mni/lib directory, and set the environment appropriately. When I source the environment, I get: > > > > Setting up environment for FreeSurfer/FS-FAST (and FSL) > > FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > FSFAST_HOME /usr/local/freesurfer-dev20050905/fsfast > > SUBJECTS_DIR /data/flanders/work/alex/freesurfer/subjects > > FUNCTIONALS_DIR /usr/local/freesurfer-dev20050905/sessions > > MINC_BIN_DIR /usr/local/freesurfer-dev20050905/lib/mni/bin > > MINC_LIB_DIR /usr/local/freesurfer-dev20050905/lib/mni/lib > > PERL5LIB /usr/local/freesurfer-dev20050905/lib/mni/lib/perl5/5.8.5 > > GSL_DIR /usr/local/freesurfer-dev20050905/lib/gsl > > QTDIR /usr/local/freesurfer-dev20050905/lib/qt > > TCLLIBPATH /usr/local/freesurfer-dev20050905/lib/tcltktixblt/lib > > FSL_DIR /usr/local/fsl > > > > However, when I try to run autorecon, I get a message saying "cmd: Undefined variable." I get this whether the environment is set to link to perl5 in $FREESURFER_HOME/lib/mni/lib/ or in /usr/pubsw/packages/mni/current/lib/. > > I don't even know if it's the perl library that's the problem. Could someone please help out? As far as we're aware, all the environments are set correctly, so we're not sure what Undefined variable is referring to. The entire output is below: > > > > recon-all -autorecon1 -subjid 27_new -hemi lh > > INFO: SUBJECTS_DIR is /data/flanders/work/alex/freesurfer/subjects > > Actual FREESURFER_HOME /usr/local/freesurfer-dev20050905 > > Linux flanders 2.4.26 #2 SMP Tue Dec 14 03:07:23 EST 2004 i686 GNU/Linux > > ######################################## > > program versions used > > $Id: recon-all-nmr,v 1.102 2005/09/02 18:03:58 greve Exp $ > > $Id: mri_motion_correct2,v 1.9 2004/12/14 03:37:42 greve Exp $ > > mri_convert --version > > $ > > $Header: /software/source/minc/progs/rawtominc/rawtominc.c,v 6.13.2.2 2005/03/16 19:02:52 bert Exp $ > > minctracc.c > > $Header: /software/source/registration/mni_autoreg/minctracc/Main/minctracc.c,v 96.11 2004/02/12 05:54:22 rotor Exp $ > > $Header: /software/source/minc/progs/mincresample/mincresample.c,v 6.12.2.1 2005/03/16 19:02:51 bert Exp $ > > $Header: /software/source/minc/progs/mincaverage/mincaverage.c,v 6.4.2.2 2005/03/16 19:02:49 bert Exp $ > > $Id: talairach2,v 1.7 2004/08/31 18:07:37 tosa Exp $ > > mri_convert --version > > $ > > # $Id: mritotal.in,v 1.12 2004/02/12 05:55:18 rotor Exp $ > > Program nu_correct, built from: > > Package MNI N3, version 1.10, compiled by nicks@martinos01 (i686-pc-linux-gnu) on 2005-08-29 at 19:41:40 > > ProgramName: mri_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_normalize.c,v 1.36 2005/08/15 14:05:49 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_watershed ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_watershed.cpp,v 1.34 2005/08/15 14:05:17 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_segment ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_segment.c,v 1.27 2005/08/24 19:48:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_fill ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_fill.c,v 1.94 2005/08/15 14:30:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_tessellate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_tessellate.c,v 1.24 2005/08/18 16:19:10 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_smooth ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_smooth.c,v 1.13 2005/08/15 14:22:53 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_inflate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_inflate.c,v 1.28 2005/08/15 14:23:37 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_fix_topology ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_fix_topology.c,v 1.31 2005/08/15 14:28:43 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_euler_number ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_euler_number.c,v 1.4 2003/09/05 04:45:41 kteich Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_make_surfaces ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_make_surfaces.c,v 1.60 2005/08/22 17:47:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_register.c,v 1.30 2005/08/15 14:24:44 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mrisp_paint ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mrisp_paint.c,v 1.6 2005/02/14 04:30:19 segonne Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_label2label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_label2label.c,v 1.21 2004/11/16 00:35:37 greve Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mris2rgb ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris2rgb.c,v 1.33 2005/06/08 19:45:07 nicks Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_em_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_em_register.c,v 1.50 2005/05/30 20:36:05 xhan Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_ca_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_normalize.c,v 1.31 2005/08/15 14:14:22 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_ca_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_register.c,v 1.34 2005/08/18 13:29:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ProgramName: mri_ca_label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_label.c,v 1.62 2005/08/18 13:29:41 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > > ####################################### > > GCA RB40_talairach_2005-07-20.gca > > AvgCurvTif average.curvature.filled.buckner40.tif > > GCS curvature.buckner40.filled.desikan_killiany.gcs > > ####################################### > > /data/flanders/work/alex/freesurfer/subjects/27_new > > Using COR format > > --------------------------------------------- > > MotionCor Thu Sep 8 11:59:54 EST 2005 > > > > INFO: no runs were found in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig/XXX, > > however, there is a volume in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig, > > so I am just going to proceed with that as the input. > > cmd: Undefined variable. > > > > > > _______________________________________________ > > Freesurfer mailing list > > Freesurfer(a)nmr.mgh.harvard.edu > > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > -- > Douglas N. Greve, Ph.D. > MGH-NMR Center > greve(a)nmr.mgh.harvard.edu > Phone Number: 617-724-2358 > Fax: 617-726-7422 > > > > _______________________________________________ > Freesurfer mailing list > Freesurfer(a)nmr.mgh.harvard.edu > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > > > > > > > > > > > -- > Douglas N. Greve, Ph.D. > MGH-NMR Center > greve(a)nmr.mgh.harvard.edu > Phone Number: 617-724-2358 > Fax: 617-726-7422 > > > >

3 2

RE: [Freesurfer] Intstallation problems on new dev?
by Fornito, Alexander 08 Sep '05

08 Sep '05

Do you mean you're not sure if it will work? -----Original Message----- From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] Sent: Fri 9/9/2005 9:28 AM To: Fornito, Alexander Cc: Bruce Fischl; freesurfer(a)nmr.mgh.harvard.edu Subject: Re: [Freesurfer] Intstallation problems on new dev? You should be able to run it with -autorecon-all -rerun. Having said that, I don't know that we've actually run it that way. doug Fornito, Alexander wrote: Hi Bruce and Doug, When you say it can be done automatically,does that mean it wouldn't require additional editing? Does it use edits that are already performed (eg., in creating surfaces with the dev version)? If so, do you know how long it would roughly take to re-create them in this way? Thanks again, Alex -----Original Message----- From: Bruce Fischl [mailto:fischl@nmr.mgh.harvard.edu] Sent: Thu 9/8/2005 10:45 PM To: Fornito, Alexander Cc: Doug Greve; freesurfer(a)nmr.mgh.harvard.edu Subject: RE: [Freesurfer] Intstallation problems on new dev? Hi Alex, you probably want to regenerate everything. Note that this can be done automatically through recon-all (Doug can tell you the switches). cheers, Bruce On Thu, 8 Sep 2005, Fornito, Alexander wrote: Seems to be working now. Thanks Doug, you're a lifesaver!! As an aside, will surfaces created using the 20050509 dev version be compatible with those created using the upcoming stable release? -----Original Message----- From: Doug Greve [mailto:greve@nmr.mgh.harvard.edu] Sent: Thu 9/8/2005 1:43 PM To: Fornito, Alexander Cc: freesurfer(a)nmr.mgh.harvard.edu Subject: Re: [Freesurfer] Intstallation problems on new dev? That's due to a problem I created a few days ago. Fixes are at: ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve doug On Thu, 8 Sep 2005, Fornito, Alexander wrote: > Hi, > We've recently installed the freesurfer-Linux-rh9-dev20050905-full.tar.gz distribution on our systems, which run Debian 3.1. I noticed that unpacking the distribution did not place the perl5 directory in $FREESURFER_HOME/lib/mni/lib,as the readme file says it should. I then downloaded the mni-Linux2-2.3-i386.tar.gz and copied the perl5 in to the $FREESURFER_HOME/lib/mni/lib directory, and set the environment appropriately. When I source the environment, I get: > > Setting up environment for FreeSurfer/FS-FAST (and FSL) > FREESURFER_HOME /usr/local/freesurfer-dev20050905 > FSFAST_HOME /usr/local/freesurfer-dev20050905/fsfast > SUBJECTS_DIR /data/flanders/work/alex/freesurfer/subjects > FUNCTIONALS_DIR /usr/local/freesurfer-dev20050905/sessions > MINC_BIN_DIR /usr/local/freesurfer-dev20050905/lib/mni/bin > MINC_LIB_DIR /usr/local/freesurfer-dev20050905/lib/mni/lib > PERL5LIB /usr/local/freesurfer-dev20050905/lib/mni/lib/perl5/5.8.5 > GSL_DIR /usr/local/freesurfer-dev20050905/lib/gsl > QTDIR /usr/local/freesurfer-dev20050905/lib/qt > TCLLIBPATH /usr/local/freesurfer-dev20050905/lib/tcltktixblt/lib > FSL_DIR /usr/local/fsl > > However, when I try to run autorecon, I get a message saying "cmd: Undefined variable." I get this whether the environment is set to link to perl5 in $FREESURFER_HOME/lib/mni/lib/ or in /usr/pubsw/packages/mni/current/lib/. > I don't even know if it's the perl library that's the problem. Could someone please help out? As far as we're aware, all the environments are set correctly, so we're not sure what Undefined variable is referring to. The entire output is below: > > recon-all -autorecon1 -subjid 27_new -hemi lh > INFO: SUBJECTS_DIR is /data/flanders/work/alex/freesurfer/subjects > Actual FREESURFER_HOME /usr/local/freesurfer-dev20050905 > Linux flanders 2.4.26 #2 SMP Tue Dec 14 03:07:23 EST 2004 i686 GNU/Linux > ######################################## > program versions used > $Id: recon-all-nmr,v 1.102 2005/09/02 18:03:58 greve Exp $ > $Id: mri_motion_correct2,v 1.9 2004/12/14 03:37:42 greve Exp $ > mri_convert --version > $ > $Header: /software/source/minc/progs/rawtominc/rawtominc.c,v 6.13.2.2 2005/03/16 19:02:52 bert Exp $ > minctracc.c > $Header: /software/source/registration/mni_autoreg/minctracc/Main/minctracc.c,v 96.11 2004/02/12 05:54:22 rotor Exp $ > $Header: /software/source/minc/progs/mincresample/mincresample.c,v 6.12.2.1 2005/03/16 19:02:51 bert Exp $ > $Header: /software/source/minc/progs/mincaverage/mincaverage.c,v 6.4.2.2 2005/03/16 19:02:49 bert Exp $ > $Id: talairach2,v 1.7 2004/08/31 18:07:37 tosa Exp $ > mri_convert --version > $ > # $Id: mritotal.in,v 1.12 2004/02/12 05:55:18 rotor Exp $ > Program nu_correct, built from: > Package MNI N3, version 1.10, compiled by nicks@martinos01 (i686-pc-linux-gnu) on 2005-08-29 at 19:41:40 > ProgramName: mri_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_normalize.c,v 1.36 2005/08/15 14:05:49 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_watershed ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_watershed.cpp,v 1.34 2005/08/15 14:05:17 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_segment ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_segment.c,v 1.27 2005/08/24 19:48:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_fill ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_fill.c,v 1.94 2005/08/15 14:30:08 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_tessellate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_tessellate.c,v 1.24 2005/08/18 16:19:10 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_smooth ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_smooth.c,v 1.13 2005/08/15 14:22:53 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_inflate ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_inflate.c,v 1.28 2005/08/15 14:23:37 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_fix_topology ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_fix_topology.c,v 1.31 2005/08/15 14:28:43 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_euler_number ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_euler_number.c,v 1.4 2003/09/05 04:45:41 kteich Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_make_surfaces ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_make_surfaces.c,v 1.60 2005/08/22 17:47:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_sphere ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_sphere.c,v 1.31 2005/08/15 14:24:12 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris_register.c,v 1.30 2005/08/15 14:24:44 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mrisp_paint ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mrisp_paint.c,v 1.6 2005/02/14 04:30:19 segonne Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_label2label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_label2label.c,v 1.21 2004/11/16 00:35:37 greve Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mris2rgb ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mris2rgb.c,v 1.33 2005/06/08 19:45:07 nicks Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_em_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_em_register.c,v 1.50 2005/05/30 20:36:05 xhan Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_ca_normalize ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_normalize.c,v 1.31 2005/08/15 14:14:22 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_ca_register ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_register.c,v 1.34 2005/08/18 13:29:27 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ProgramName: mri_ca_label ProgramArguments: -all-info ProgramVersion: $Name: $ TimeStamp: 05/09/08-01:59:54-GMT CVS: $Id: mri_ca_label.c,v 1.62 2005/08/18 13:29:41 fischl Exp $ User: UNKNOWN Machine: flanders Platform: Linux PlatformVersion: 2.4.26 CompilerName: GCC CompilerVersion: 30200 > ####################################### > GCA RB40_talairach_2005-07-20.gca > AvgCurvTif average.curvature.filled.buckner40.tif > GCS curvature.buckner40.filled.desikan_killiany.gcs > ####################################### > /data/flanders/work/alex/freesurfer/subjects/27_new > Using COR format > --------------------------------------------- > MotionCor Thu Sep 8 11:59:54 EST 2005 > > INFO: no runs were found in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig/XXX, > however, there is a volume in /data/flanders/work/alex/freesurfer/subjects/27_new/mri/orig, > so I am just going to proceed with that as the input. > cmd: Undefined variable. > > > _______________________________________________ > Freesurfer mailing list > Freesurfer(a)nmr.mgh.harvard.edu > https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer > > > -- Douglas N. Greve, Ph.D. MGH-NMR Center greve(a)nmr.mgh.harvard.edu Phone Number: 617-724-2358 Fax: 617-726-7422 _______________________________________________ Freesurfer mailing list Freesurfer(a)nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer -- Douglas N. Greve, Ph.D. MGH-NMR Center greve(a)nmr.mgh.harvard.edu Phone Number: 617-724-2358 Fax: 617-726-7422

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer