Freesurfer

freesurfer@nmr.mgh.harvard.edu

30132 discussions

Recon-all crash at Talairach
by Meaghan Perdue 25 Aug '18

25 Aug '18

External Email - Use Caution Hello experts, I am processing a data set through Freesurfer v. 5.3 and many subjects are crashing at the following point: #@# Talairach Sat Aug 25 10:06:26 EDT 2018 /Volumes/freesurfer/PID/Time3/sn9885/mri \n mri_nu_correct.mni --n 1 --proto-iters 1000 --distance 50 --no-rescale --i orig.mgz --o orig_nu.mgz \n The command I've used to initiate recon all is: recon-all -all -s sn9885 -i sn9885.nii.gz -cw256 -qcache Any advice for trouble-shooting this? Many thanks! Meaghan Perdue -- Meaghan Perdue PhD Student Developmental Psychology Neurobiology of Language University of Connecticut Bousfield A302

1 0

Unable to copy the license.txt file into $FREESURFER_HOME
by Tsz Wai (Bentley) Lo 24 Aug '18

24 Aug '18

External Email - Use Caution Hi FreeSurfer Developers, I am attempting to copy my license.txt into $FREESURFER_HOME. I have already open a terminal window and define and environment variable called freesurfer_home but I am not sure where FreeSurfer home is. I am not sure how to source the set up script as well. I am on macOS high Sierra. Bentley This email is intended only for the named recipient(s) and may be confidential. Any unauthorized use, dissemination or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately and destroy all copies of this email.

2 2

Error with mris_anatomical_stats
by Davide Momi 24 Aug '18

24 Aug '18

External Email - Use Caution Dear FreeSurfer, I have a problem when I use mris_anatomical_stats. It gives me an error saying that it couldn't read the input volume which is the wm.mgz file. would you please help me how I should fix this problem? this is the command which I used: mris_anatomical_stats -a label/lh.aparc.annot -b 60_AV rh computing statistics for each annotation in label/lh.aparc.annot. reading volume /Users/davidemomi/Downloads/Broad_60_AV//60_AV/mri/wm.mgz... mghRead(/Users/davidemomi/Downloads/Broad_60_AV//60_AV/mri/wm.mgz, -1): could not open file mris_anatomical_stats: could not read input volume /Users/davidemomi/Downloads/Broad_60_AV//60_AV/mri/wm.mgz Thanks in advance Davide

2 6

bbregister error
by Nada Naguib 24 Aug '18

24 Aug '18

External Email - Use Caution Hello, I have been using bbregister in this format bbregister —mov dkti4d.nii —s NewT2out —init-fsl —bold —lea register.lta NewT2out is the output of the free surfer processing on the T1 image and dkti4d.nii is the template file I want to use for the registration. it has worked before but now there is a new error ERROR: cannot find NewT2out in /project/iconic/apps/freesurfer/5.3.0/install/subjects even though I have already ran the command: setenv SUBJECTS_DIRECTORY /project/bil/Nada This path is where both NewT2out and dkti4d.nii are located. I don’t understand what is going wrong Best Nada

4 5

converting a color lookup table in csv to freesurfer format (.ctab)
by miracle ozzoude 23 Aug '18

23 Aug '18

External Email - Use Caution Hello, How can I convert a csv color lookup table to freesurfer format (.ctab)? My end goal is to use it to perform partial volume correction for an atlas/segmentation different from default freesurfer atlas. The atlas has a color lookup table however, mri_gtmpvc can't read it. The atlas is in nifti format and is based on MAPLEM. https://web.gin.g-node.org/doi/MALPEM_ADNI_data Thanks. best, Paul

1 0

PSIR to refine pial surface?
by Vriend, Chris 23 Aug '18

23 Aug '18

External Email - Use Caution Dear Freesurfers, In our centre we acquire T1 MPRAGE scans and phase-sensitive inversion recovery (PSIR) scans. Because of its better contrast between brain and non-brain I thought that we could use this scan in the freesurfer pipeline (v6.0) to refine the pial surface. I've already tried to use the -FLAIRpial flag (even though it's obviously not a FLAIR) but that actually makes it worse. Does anyone know if it is at all possible or have any experience with using PSIR scans in freesurfer and can point me in the right direction? Thanks, Best wishes Chris [cid:image001.png@01D40E30.9B2FFEE0] Dr. C. Vriend | Assistant Professor Anatomy & Neurosciences - section Neuropsychiatry | Psychiatry Location VUmc | O|2 13W09 | De Boelelaan 1118, 1081 HZ Amsterdam T: + 31 (0) 6 25 69 49 12 | E: c.vriend(a)vumc.nl<mailto:c.vriend@vumc.nl> P: p/a sec. Anatomy & Neurosciences, postbus 7057, 1007 MB Amsterdam www.amsterdamumc.nl<http://www.amsterdamumc.nl> | www.vumc.nl<http://www.vumc.nl/> | http://www.neuroscience-amsterdam.nl/?page_id=189 _____________________________________________________ VUmc disclaimer: www.vumc.nl/disclaimer<http://www.vumc.nl/disclaimer>

2 1

Low resolution voxels of T1-weighted data (FreeSurfer)
by Martin Juneja 23 Aug '18

23 Aug '18

External Email - Use Caution Hi FS experts, I came across this post https://mail.nmr.mgh.harvard.edu/pipermail/freesurfer/2013-June/031245.html by Dr. Bruce Fischl, where it is mentioned that "*You won't be able to analyze the data unless **it is T1-weighted with voxels that are <1.3mm or so in any dimension."* However, I came across several papers in high impact journals, including papers published in Cerebral Cortex e.g. a very nice paper by Dr. Winkler https://academic.oup.com/cercor/article/28/2/738/4668693, other one is https://www.ncbi.nlm.nih.gov/pubmed/28183529, where the authors used voxels of size 1.3 mm or 1.33 mm. Could you please comment on this contradiction whether voxels of this large size or even larger than 1.33 mm can give decent/correct results, or it is not advisable at all? Thanks.

2 1

Extract Cortical Thickness Values from ROI.nii
by Davide Momi 23 Aug '18

23 Aug '18

External Email - Use Caution Dear all, I've just completed the recon -all command and I would like to extract Cortical thickness values in subject space at vertex level (without any sort of normalization). Could you please give me an insight on how to do it? Thanks in advance Dav e

2 1

memprage processing steps?
by Caspar M. Schwiedrzik 23 Aug '18

23 Aug '18

External Email - Use Caution Hi! I was wondering whether there is an overview / walkthrough for all the steps involved when working with MEMPRAGE? I am thinking dcmunpack, mri-concat / mri_average, flags for recon-all, mris_make_surfaces, etc. Any pointers would be appreciated. Thanks! Caspar

2 1

selxavg3-sess contrasts error
by Francesca Strappini 22 Aug '18

22 Aug '18

External Email - Use Caution Hi, I'm trying to analyze a block-design experiment. I run selxavg3-sess: selxavg3-sess -s MS -analysis MS_VisLocDrawings.sm03.rh And I got this error message while computing the contrasts. Any idea what does it mean? outtop = /home/labs/malach/frastra/freesurfer/fsfast/visloc_drawing Extension format = nii.gz 1 animals-vs-fixation.mat 2 body_parts-vs-fixation.mat 3 faces-vs-fixation.mat 4 houses-vs-fixation.mat 5 scrambled_images-vs-fixation.mat 6 tools-vs-fixation.mat Unable to perform assignment because the indices on the left side are not compatible with the size of the right side. Error in fast_ldpar4 (line 97) par4(nthrow,1) = tonset; Error in flac_customize (line 121) [par partype] = fast_ldpar4(parpath); Error in fast_selxavg3 (line 65) flac0 = flac_customize(flac0); >> ------------------------------------------ ERROR: fast_selxavg3() failed\n Thank you! -- Francesca Strappini, Ph.D. Neurobiology Department Weizmann Institute of Science 234 Herzl Street, Rehovot 7610001 Israel Tel.: +972 58 444 2584 E-mail: francesca.strappini(a)weizmann.ac.il

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer