Hi
No I did not. Actually, I'm not sure how to do that. Is there any information on that somewhere I could look up?
best wishes,
Prerona
On 21 December 2012 15:47, Anastasia Yendiki ayendiki@nmr.mgh.harvard.edu wrote:
This doesn't look right. Are you certain that your gradient table is correct? Have you looked at the eigenvectors of the tensor fit to make sure they're in the right orientation?
On Fri, 21 Dec 2012, s0675204 wrote:
Thank you so much for your help! Sorry if I asked something that has already asked on the mailing list
I tried changing the threshold but that did not help. I am following exactly the instructions here http://surfer.nmr.mgh.harvard.edu/fswiki/FsTutorial/TraculaOutputs
(Except I changed the file names
So, the command I used was:
freeview -v /home/canlilab/SBU/data/tracula_test/00075/dmri/dtifit_FA.nii.gz \
/home/canlilab/SBU/data/tracula_test/00075/dpath/lh.ilf_AS_avg33_mni_flt/path.pd.nii.gz:colormap=jet:isosurface=0,0:color='Red' \
/home/canlilab/SBU/data/tracula_test/00075/dpath/rh.ilf_AS_avg33_mni_flt/path.pd.nii.gz:colormap=jet:isosurface=0,0:color='Red' &)
Here is a screenshot attached. Should I also email you my files?
best wishes,
Prerona
On 20 December 2012 16:44, Anastasia Yendiki ayendiki@nmr.mgh.harvard.edu wrote:
Hi Prerona - As I've mentioned to others, you can ignore the "Degenerate spline segment" message.
I can't tell what you mean by "only traced a part of the trac". Can you see the rest of it when you play with the threshold? Are you reconstructing only the ILF? If not, do the other pathways look ok? Can you send a screenshot of what you see when you run the "freeview -tv ..." command from the tutorial?
Thanks, a.y
On Mon, 17 Dec 2012, s0675204 wrote:
Hello
I have been running trac-paths, and thought it finishes with a message saying no errors, I get an error saying ERROR: Degenerate spline segment in the intermediate message logs
Also I looked at the result using this command: freeview -v $TUTORIAL_DATA/diffusion_tutorial/Diff001/dmri/dtifit_FA.nii.gz \
$TUTORIAL_DATA/diffusion_tutorial/Diff001/dpath/lh.ilf_AS_avg32_mni_flt/path.pd.nii.gz:colormap=jet:isosurface=0,0:color='Red' \
$TUTORIAL_DATA/diffusion_tutorial/Diff001/dpath/rh.ilf_AS_avg32_mni_flt/path.pd.nii.gz:colormap=jet:isosurface=0,0:color='Red' &
but it had only traced a part of the trac on one side and nothing on the other side
Can you help me understand what went wrong and how to fix it?
Thank you so much for your help!
best wishes,
Prerona
On 12 December 2012 11:57, Anastasia Yendiki ayendiki@nmr.mgh.harvard.edu wrote: > > > > > 1) Can't hurt to delete. > 2) Yes. > 3) Yes. > > > On Wed, 12 Dec 2012, s0675204 wrote: > >> Hello, >> >> thank you for your help with the first steps of running Tracula. >> >> I was trying to run trac-all step 3 (paths), but was getting an >> error >> with the mergedph1samples file. I saw on the mailbase that you have >> suggested to run bedpost directly to fix this >> >> I have 3 questions about this: >> >> 1) do I need to delete any of the (temporary?) files or folders >> created by trac-all step 2 before running bedpost >> >> 2) should I run bedpost INSTEAD of trac-all step 2 for the remaining >> subjects? >> >> 3) you have suggested on the list to run bedpost as: >> bedpostx /usr/local/freesurfer/subjects/C001/dmri >> is this the same dmri folder as created by tracula step 1 (for each >> subject) >> >> Thank you so much for your help with this - I really appreciate it >> >> best wishes >> >> Prerona >> >> >> On 10 December 2012 19:54, Anastasia Yendiki >> ayendiki@nmr.mgh.harvard.edu wrote: >>> >>> >>> >>> >>> >>> I'm guessing that this shows up in the scripts/trac-all.log of a >>> particular >>> subject? Then it applies to that subject. >>> >>> >>> On Mon, 10 Dec 2012, s0675204 wrote: >>> >>>> Hello >>>> >>>> My trac- preproc has completed. However, I am confused about the >>>> status message. It says: >>>> >>>> #------------------------------------- >>>> trac-preproc finished without error at Mon Dec 10 16:32:20 EST >>>> 2012 >>>> ERROR: cannot find /home/canlilab/SBU/data/recon_output/00387 >>>> >>>> Does this mean it was completed succesfully for everyone or >>>> everyone >>>> but that 00387 person? >>>> >>>> Is there any way I can verify this? >>>> >>>> thank you so much for your help >>>> >>>> best wishes, >>>> >>>> Prerona >>>> >>>> >>>> On 8 December 2012 13:38, Anastasia Yendiki >>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> In your dmrirc, you define multiple subjects, but only one >>>>> bvecfile >>>>> and >>>>> one >>>>> bvalfile that are used for all subjects. >>>>> >>>>> >>>>> On Sat, 8 Dec 2012, s0675204 wrote: >>>>> >>>>>> the values are the same but each subject has an individual bvec >>>>>> & >>>>>> bval >>>>>> file. so it depends on how the script will read it? >>>>>> >>>>>> On 8 December 2012 00:03, Anastasia Yendiki >>>>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Are the bvecs/bvals not the same for all subjects? >>>>>>> >>>>>>> >>>>>>> On Fri, 7 Dec 2012, s0675204 wrote: >>>>>>> >>>>>>>> oh! i thought this was how these were meant to be! i will do >>>>>>>> that. >>>>>>>> sadly i left the lab and came home for the day but i will try >>>>>>>> it >>>>>>>> as >>>>>>>> soon as i am back and let you know! >>>>>>>> thank you so much! do we have to do this for each subject or >>>>>>>> just >>>>>>>> one >>>>>>>> time? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 7 December 2012 23:51, Anastasia Yendiki >>>>>>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> I see. Can you try formatting them in columns (1 column for >>>>>>>>> the >>>>>>>>> bvals >>>>>>>>> and >>>>>>>>> 3 >>>>>>>>> columns for the bvecs)? >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, 7 Dec 2012, s0675204 wrote: >>>>>>>>> >>>>>>>>>> yes! these are the original files >>>>>>>>>> >>>>>>>>>> well these are the files i pointed to in my config file. and >>>>>>>>>> i >>>>>>>>>> think >>>>>>>>>> the script copies them over to the dmrirc folder? >>>>>>>>>> >>>>>>>>>> best wishes, >>>>>>>>>> >>>>>>>>>> Prerona >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 7 December 2012 23:38, Anastasia Yendiki >>>>>>>>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Yes, I can see that each of the bvecs/bvals files is one >>>>>>>>>>> long >>>>>>>>>>> line. >>>>>>>>>>> Was >>>>>>>>>>> that >>>>>>>>>>> the case for the original files that you specified in the >>>>>>>>>>> dmrirc? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Fri, 7 Dec 2012, s0675204 wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Anastasia >>>>>>>>>>>> >>>>>>>>>>>> I had attached the files, but maybe they did not go >>>>>>>>>>>> through >>>>>>>>>>>> to >>>>>>>>>>>> the >>>>>>>>>>>> mailing list? So I am sending them to your email id. Hope >>>>>>>>>>>> this >>>>>>>>>>>> is >>>>>>>>>>>> okay >>>>>>>>>>>> >>>>>>>>>>>> best wishes, >>>>>>>>>>>> >>>>>>>>>>>> Prerona >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>>> From: s0675204 s0675204@sms.ed.ac.uk >>>>>>>>>>>> Date: 7 December 2012 19:44 >>>>>>>>>>>> Subject: Re: [Freesurfer] Running Tracula: trac-preproc >>>>>>>>>>>> exited >>>>>>>>>>>> with >>>>>>>>>>>> ERRORS >>>>>>>>>>>> To: freesurfer@nmr.mgh.harvard.edu >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hello >>>>>>>>>>>> >>>>>>>>>>>> I think I spoke to soon! >>>>>>>>>>>> >>>>>>>>>>>> It ended with errors again. >>>>>>>>>>>> >>>>>>>>>>>> I get the error message: "bvecs and bvals don't have the >>>>>>>>>>>> same >>>>>>>>>>>> number >>>>>>>>>>>> of >>>>>>>>>>>> entries" >>>>>>>>>>>> >>>>>>>>>>>> I saw on some older messages on the mail-base you said >>>>>>>>>>>> that >>>>>>>>>>>> we >>>>>>>>>>>> need >>>>>>>>>>>> to >>>>>>>>>>>> check that the number of entries in the bvals is same as >>>>>>>>>>>> and >>>>>>>>>>>> bvecs >>>>>>>>>>>> is >>>>>>>>>>>> 3 times as much as the number of volumes. I have checked >>>>>>>>>>>> that >>>>>>>>>>>> this >>>>>>>>>>>> is >>>>>>>>>>>> the case >>>>>>>>>>>> >>>>>>>>>>>> I am wondering if it is some formatting problem? there are >>>>>>>>>>>> no >>>>>>>>>>>> spaces >>>>>>>>>>>> at the end of the file. and there are no end of line >>>>>>>>>>>> markers >>>>>>>>>>>> either. >>>>>>>>>>>> >>>>>>>>>>>> Please could you advise me? I have attached the files and >>>>>>>>>>>> also >>>>>>>>>>>> pasted >>>>>>>>>>>> the contents below >>>>>>>>>>>> >>>>>>>>>>>> My config file is still the same (as pasted below) except >>>>>>>>>>>> I >>>>>>>>>>>> tried >>>>>>>>>>>> changing >>>>>>>>>>>> nb0 to 2 >>>>>>>>>>>> >>>>>>>>>>>> (# Number of low-b images >>>>>>>>>>>> # Must be specified if inputs are not DICOM >>>>>>>>>>>> # Default: Read from DICOM header >>>>>>>>>>>> # >>>>>>>>>>>> set nb0 = 2) >>>>>>>>>>>> >>>>>>>>>>>> best wishes, >>>>>>>>>>>> >>>>>>>>>>>> Prerona >>>>>>>>>>>> >>>>>>>>>>>> ========================================================= >>>>>>>>>>>> bvals: >>>>>>>>>>>> >>>>>>>>>>>> 0 800 800 800 800 800 800 800 800 800 800 800 800 800 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 800 800 0 800 800 800 800 800 800 800 800 800 800 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 >>>>>>>>>>>> 800 800 800 800 800 800 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> bvecs: >>>>>>>>>>>> >>>>>>>>>>>> 0 0.99864840507507 0.01463935524225 0.01274211052805 >>>>>>>>>>>> 0.85177010297775 >>>>>>>>>>>> 0.86449736356735 0.85295587778091 0.83894062042236 >>>>>>>>>>>> 0.7912425994873 >>>>>>>>>>>> 0.51641523838043 0.46147873997688 0.54209464788436 >>>>>>>>>>>> 0.44143822789192 >>>>>>>>>>>> 0.52723878622055 0.4250853061676 0.51590526103973 >>>>>>>>>>>> 0.43744987249374 >>>>>>>>>>>> 0.50455766916275 0.05208261311054 0.06073396280407 >>>>>>>>>>>> 0.00979638285934 >>>>>>>>>>>> 0 >>>>>>>>>>>> 0.99864840507507 0.01463935524225 0.01274211052805 >>>>>>>>>>>> 0.85177010297775 >>>>>>>>>>>> 0.86449736356735 0.85295587778091 0.83894062042236 >>>>>>>>>>>> 0.7912425994873 >>>>>>>>>>>> 0.51641523838043 0.46147873997688 0.54209464788436 >>>>>>>>>>>> 0.44143822789192 >>>>>>>>>>>> 0.52723878622055 0.4250853061676 0.51590526103973 >>>>>>>>>>>> 0.43744987249374 >>>>>>>>>>>> 0.50455766916275 0.05208261311054 0.06073396280407 >>>>>>>>>>>> 0.00979638285934 >>>>>>>>>>>> 0 >>>>>>>>>>>> -0.00687454920262 0.96709138154983 0.62002921104431 >>>>>>>>>>>> 0.52092331647872 >>>>>>>>>>>> 0.18501849472522 -0.42448142170906 -0.44344407320022 >>>>>>>>>>>> 0.15539556741714 >>>>>>>>>>>> 0.60610836744308 0.88347893953323 0.71210372447967 >>>>>>>>>>>> 0.30400663614273 >>>>>>>>>>>> -0.23736105859279 -0.70398008823394 -0.85636389255523 >>>>>>>>>>>> -0.73376137018203 -0.22848516702652 -0.00803200621157 >>>>>>>>>>>> 0.51328992843627 >>>>>>>>>>>> 0.93218487501144 0 -0.00687454920262 0.96709138154983 >>>>>>>>>>>> 0.62002921104431 >>>>>>>>>>>> 0.52092331647872 0.18501849472522 -0.42448142170906 >>>>>>>>>>>> -0.44344407320022 >>>>>>>>>>>> 0.15539556741714 0.60610836744308 0.88347893953323 >>>>>>>>>>>> 0.71210372447967 >>>>>>>>>>>> 0.30400663614273 -0.23736105859279 -0.70398008823394 >>>>>>>>>>>> -0.85636389255523 >>>>>>>>>>>> -0.73376137018203 -0.22848516702652 -0.00803200621157 >>>>>>>>>>>> 0.51328992843627 >>>>>>>>>>>> 0.93218487501144 0 0.05151799321174 -0.2540076971054 >>>>>>>>>>>> -0.78447526693344 >>>>>>>>>>>> 0.05591572076082 -0.46734625101089 -0.3037790954113 >>>>>>>>>>>> 0.31549325585365 >>>>>>>>>>>> 0.5914282798767 0.60493636131286 0.08063688874244 >>>>>>>>>>>> -0.44614082574844 >>>>>>>>>>>> -0.84422290325164 -0.81589156389236 -0.56895911693573 >>>>>>>>>>>> -0.02196817658841 0.51983833312988 0.83259600400924 >>>>>>>>>>>> 0.99861049652099 >>>>>>>>>>>> 0.85606354475021 0.36184993386268 0 0.05151799321174 >>>>>>>>>>>> -0.2540076971054 >>>>>>>>>>>> -0.78447526693344 0.05591572076082 -0.46734625101089 >>>>>>>>>>>> -0.3037790954113 >>>>>>>>>>>> 0.31549325585365 0.5914282798767 0.60493636131286 >>>>>>>>>>>> 0.08063688874244 >>>>>>>>>>>> -0.44614082574844 -0.84422290325164 -0.81589156389236 >>>>>>>>>>>> -0.56895911693573 -0.02196817658841 0.51983833312988 >>>>>>>>>>>> 0.83259600400924 >>>>>>>>>>>> 0.99861049652099 0.85606354475021 0.36184993386268 >>>>>>>>>>>> On 7 December 2012 14:08, Anastasia Yendiki >>>>>>>>>>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Great, I love easy problems :) >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Fri, 7 Dec 2012, s0675204 wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Thank you! It's chugging away now >>>>>>>>>>>>>> >>>>>>>>>>>>>> best wishes, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Prerona >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 7 December 2012 13:46, Anastasia Yendiki >>>>>>>>>>>>>> ayendiki@nmr.mgh.harvard.edu wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Prerona - You need to uncomment the bvecfile and >>>>>>>>>>>>>>> bvalfile >>>>>>>>>>>>>>> definitions >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> your configuration file. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hope this helps, >>>>>>>>>>>>>>> a.y >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Fri, 7 Dec 2012, s0675204 wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hello >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I am trying to run Tracula on a set of dicoms files. I >>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>> run >>>>>>>>>>>>>>>> recon-all previously. >>>>>>>>>>>>>>>> I am getting a message trac-preproc exited with ERRORS >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Please can anyone advise me on this? >>>>>>>>>>>>>>>> I have listed all the details (command, error/output, >>>>>>>>>>>>>>>> config >>>>>>>>>>>>>>>> file) >>>>>>>>>>>>>>>> below >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thank you so much for your help >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> best wishes, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Prerona >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> DETAILS >>>>>>>>>>>>>>>> ========================================= >>>>>>>>>>>>>>>> command used: trac-all -prep -c >>>>>>>>>>>>>>>> ./scripts/dmrirc_single_subject >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ========================================= >>>>>>>>>>>>>>>> error message >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ========================================= >>>>>>>>>>>>>>>> canlilab@112-205:~/SBU/data/tracula$ trac-all -prep -c >>>>>>>>>>>>>>>> ./scripts/dmrirc_single_subject >>>>>>>>>>>>>>>> INFO: SUBJECTS_DIR is >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/recon_output >>>>>>>>>>>>>>>> INFO: Diffusion root is >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula >>>>>>>>>>>>>>>> Actual FREESURFER_HOME /home/canlilab/freesurfer >>>>>>>>>>>>>>>> trac-preproc -c >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/scripts/dmrirc.local >>>>>>>>>>>>>>>> -log >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/scripts/trac-all.log >>>>>>>>>>>>>>>> -cmd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/scripts/trac-all.cmd >>>>>>>>>>>>>>>> #------------------------------------- >>>>>>>>>>>>>>>> /home/canlilab/freesurfer/bin/trac-preproc >>>>>>>>>>>>>>>> #------------------------------------- >>>>>>>>>>>>>>>> #@# Image corrections Fri Dec 7 10:42:30 EST 2012 >>>>>>>>>>>>>>>> mri_convert >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig.nii.gz >>>>>>>>>>>>>>>> mri_convert >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig.nii.gz >>>>>>>>>>>>>>>> $Id: mri_convert.c,v 1.179.2.2 2011/05/16 20:53:47 >>>>>>>>>>>>>>>> greve >>>>>>>>>>>>>>>> Exp >>>>>>>>>>>>>>>> $ >>>>>>>>>>>>>>>> reading from >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm... >>>>>>>>>>>>>>>> Getting Series No >>>>>>>>>>>>>>>> INFO: Found 44 files in >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075 >>>>>>>>>>>>>>>> INFO: Scanning for Series Number 7 >>>>>>>>>>>>>>>> Scanning Directory >>>>>>>>>>>>>>>> INFO: found 42 files in series >>>>>>>>>>>>>>>> INFO: loading series header info. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> RunNo = 6 >>>>>>>>>>>>>>>> WARNING: Run 1 appears to be truncated >>>>>>>>>>>>>>>> Files Found: 42, Files Expected (lRep+1): 2 >>>>>>>>>>>>>>>> FileName >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm >>>>>>>>>>>>>>>> Identification >>>>>>>>>>>>>>>> NumarisVer syngo MR B17 >>>>>>>>>>>>>>>> ScannerModel TrioTim >>>>>>>>>>>>>>>> PatientName S790_P72_TC >>>>>>>>>>>>>>>> Date and time >>>>>>>>>>>>>>>> StudyDate 20120502 >>>>>>>>>>>>>>>> StudyTime 120741.390000 >>>>>>>>>>>>>>>> SeriesTime 125649.953000 >>>>>>>>>>>>>>>> AcqTime 125626.150000 >>>>>>>>>>>>>>>> Acquisition parameters >>>>>>>>>>>>>>>> PulseSeq ep_b0 >>>>>>>>>>>>>>>> Protocol DTI >>>>>>>>>>>>>>>> PhEncDir COL >>>>>>>>>>>>>>>> EchoNo 1 >>>>>>>>>>>>>>>> FlipAngle 90 >>>>>>>>>>>>>>>> EchoTime 93 >>>>>>>>>>>>>>>> InversionTime -1 >>>>>>>>>>>>>>>> RepetitionTime 5500 >>>>>>>>>>>>>>>> PhEncFOV 220 >>>>>>>>>>>>>>>> ReadoutFOV 220 >>>>>>>>>>>>>>>> Image information >>>>>>>>>>>>>>>> RunNo 6 >>>>>>>>>>>>>>>> SeriesNo 7 >>>>>>>>>>>>>>>> ImageNo 1 >>>>>>>>>>>>>>>> NImageRows 896 >>>>>>>>>>>>>>>> NImageCols 896 >>>>>>>>>>>>>>>> NFrames 42 >>>>>>>>>>>>>>>> SliceArraylSize 40 >>>>>>>>>>>>>>>> IsMosaic 1 >>>>>>>>>>>>>>>> ImgPos 772.3238 773.0634 185.5347 >>>>>>>>>>>>>>>> VolRes 1.7188 1.7188 3.0000 >>>>>>>>>>>>>>>> VolDim 128 128 40 >>>>>>>>>>>>>>>> Vc -0.9983 0.0151 -0.0555 >>>>>>>>>>>>>>>> Vr -0.0000 -0.9648 -0.2629 >>>>>>>>>>>>>>>> Vs -0.0575 -0.2625 0.9632 >>>>>>>>>>>>>>>> VolCenter 0.0000 0.0000 0.0000 >>>>>>>>>>>>>>>> TransferSyntaxUID 1.2.840.10008.1.2.1 >>>>>>>>>>>>>>>> INFO: sorting. >>>>>>>>>>>>>>>> INFO: (128 128 40), nframes = 42, ismosaic=1 >>>>>>>>>>>>>>>> Could not parse NUMARIS version string syngo MR B17 >>>>>>>>>>>>>>>> found in dicom tag 18,1020 (len = 3 != 6) >>>>>>>>>>>>>>>> Repetition Time = 5500, TR = 5500 ms >>>>>>>>>>>>>>>> PE Dir COL COL >>>>>>>>>>>>>>>> AutoAlign matrix detected >>>>>>>>>>>>>>>> AutoAlign Matrix --------------------- >>>>>>>>>>>>>>>> 1.000 0.000 0.000 0.000; >>>>>>>>>>>>>>>> 0.000 1.000 0.000 0.000; >>>>>>>>>>>>>>>> 0.000 0.000 1.000 0.000; >>>>>>>>>>>>>>>> 0.000 0.000 0.000 1.000; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> FileName >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm >>>>>>>>>>>>>>>> Identification >>>>>>>>>>>>>>>> NumarisVer syngo MR B17 >>>>>>>>>>>>>>>> ScannerModel TrioTim >>>>>>>>>>>>>>>> PatientName S790_P72_TC >>>>>>>>>>>>>>>> Date and time >>>>>>>>>>>>>>>> StudyDate 20120502 >>>>>>>>>>>>>>>> StudyTime 120741.390000 >>>>>>>>>>>>>>>> SeriesTime 125649.953000 >>>>>>>>>>>>>>>> AcqTime 125626.150000 >>>>>>>>>>>>>>>> Acquisition parameters >>>>>>>>>>>>>>>> PulseSeq ep_b0 >>>>>>>>>>>>>>>> Protocol DTI >>>>>>>>>>>>>>>> PhEncDir COL >>>>>>>>>>>>>>>> EchoNo 1 >>>>>>>>>>>>>>>> FlipAngle 90 >>>>>>>>>>>>>>>> EchoTime 93 >>>>>>>>>>>>>>>> InversionTime -1 >>>>>>>>>>>>>>>> RepetitionTime 5500 >>>>>>>>>>>>>>>> PhEncFOV 220 >>>>>>>>>>>>>>>> ReadoutFOV 220 >>>>>>>>>>>>>>>> Image information >>>>>>>>>>>>>>>> RunNo 6 >>>>>>>>>>>>>>>> SeriesNo 7 >>>>>>>>>>>>>>>> ImageNo 1 >>>>>>>>>>>>>>>> NImageRows 896 >>>>>>>>>>>>>>>> NImageCols 896 >>>>>>>>>>>>>>>> NFrames 42 >>>>>>>>>>>>>>>> SliceArraylSize 40 >>>>>>>>>>>>>>>> IsMosaic 1 >>>>>>>>>>>>>>>> ImgPos 113.4156 146.2544 -24.5854 >>>>>>>>>>>>>>>> VolRes 1.7188 1.7188 3.0000 >>>>>>>>>>>>>>>> VolDim 128 128 40 >>>>>>>>>>>>>>>> Vc -0.9983 0.0151 -0.0555 >>>>>>>>>>>>>>>> Vr -0.0000 -0.9648 -0.2629 >>>>>>>>>>>>>>>> Vs -0.0575 -0.2625 0.9632 >>>>>>>>>>>>>>>> VolCenter 0.1478 26.0388 -1.8116 >>>>>>>>>>>>>>>> TransferSyntaxUID 1.2.840.10008.1.2.1 >>>>>>>>>>>>>>>> sagrev = 0, correv =0, trarev = 0 >>>>>>>>>>>>>>>> Vs = -0.0574949 -0.262456 0.963229 >>>>>>>>>>>>>>>> INFO: no Siemens slice order reversal detected >>>>>>>>>>>>>>>> (good!). >>>>>>>>>>>>>>>> TR=5500.00, TE=93.00, TI=-1.00, flip angle=90.00 >>>>>>>>>>>>>>>> i_ras = (-0.998346, 0.0151149, -0.0554726) >>>>>>>>>>>>>>>> j_ras = (-3.31902e-08, -0.964826, -0.262891) >>>>>>>>>>>>>>>> k_ras = (-0.0574949, -0.262456, 0.963229) >>>>>>>>>>>>>>>> writing to >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig.nii.gz... >>>>>>>>>>>>>>>> mri_probedicom --i >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/dti_dicoms/00075/data_1.dcm >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dcminfo.dat >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> flip4fsl >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig.nii.gz >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig_flip.nii.gz >>>>>>>>>>>>>>>> INFO: input image orientation is LPS >>>>>>>>>>>>>>>> INFO: input image determinant is 8.86231 >>>>>>>>>>>>>>>> fslswapdim >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig.nii.gz >>>>>>>>>>>>>>>> x -y z >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig_flip.nii.gz >>>>>>>>>>>>>>>> INFO: left-right orientation was flipped by fslswapdim >>>>>>>>>>>>>>>> fslorient -forceradiological >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig_flip.nii.gz >>>>>>>>>>>>>>>> mv -f >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig_flip.mghdti.bvecs >>>>>>>>>>>>>>>> /home/canlilab/SBU/data/tracula/00075/dmri/bvecs >>>>>>>>>>>>>>>> mv: cannot stat >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> `/home/canlilab/SBU/data/tracula/00075/dmri/dwi_orig_flip.mghdti.bvecs': >>>>>>>>>>>>>>>> No such file or directory >>>>>>>>>>>>>>>> Linux 112-205.psy.sunysb.edu 2.6.32-279.5.2.el6.x86_64 >>>>>>>>>>>>>>>> #1 >>>>>>>>>>>>>>>> SMP >>>>>>>>>>>>>>>> Fri >>>>>>>>>>>>>>>> Aug >>>>>>>>>>>>>>>> 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> trac-preproc exited with ERRORS at Fri Dec 7 10:42:51 >>>>>>>>>>>>>>>> EST >>>>>>>>>>>>>>>> 2012 >>>>>>>>>>>>>>>> ============================================== >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> config file: >>>>>>>>>>>>>>>> ============================================== >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # dmrirc.example >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # This file contains commands that will be run by >>>>>>>>>>>>>>>> trac-all >>>>>>>>>>>>>>>> before >>>>>>>>>>>>>>>> an >>>>>>>>>>>>>>>> analysis. >>>>>>>>>>>>>>>> # It is used to set all parameters needed for the >>>>>>>>>>>>>>>> analysis. >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Remove a parameter from your dmrirc file if you want >>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>> default >>>>>>>>>>>>>>>> value. >>>>>>>>>>>>>>>> # Parameters that don't have default values must be >>>>>>>>>>>>>>>> specified. >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Any other commands that you might want to run before >>>>>>>>>>>>>>>> an >>>>>>>>>>>>>>>> analysis >>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>> added >>>>>>>>>>>>>>>> # to this file. >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Original Author: Anastasia Yendiki >>>>>>>>>>>>>>>> # CVS Revision Info: >>>>>>>>>>>>>>>> # $Author: ayendiki $ >>>>>>>>>>>>>>>> # $Date: 2011/05/24 06:47:12 $ >>>>>>>>>>>>>>>> # $Revision: 1.3.2.3 $ >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Copyright © 2011 The General Hospital Corporation >>>>>>>>>>>>>>>> (Boston >>>>>>>>>>>>>>>> MA) >>>>>>>>>>>>>>>> "MGH" >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Terms and conditions for use reproduction >>>>>>>>>>>>>>>> distribution >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> contribution >>>>>>>>>>>>>>>> # are found in the 'FreeSurfer Software License >>>>>>>>>>>>>>>> Agreement' >>>>>>>>>>>>>>>> contained >>>>>>>>>>>>>>>> # in the file 'LICENSE' found in the FreeSurfer >>>>>>>>>>>>>>>> distribution >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> here: >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> https://surfer.nmr.mgh.harvard.edu/fswiki/FreeSurferSoftwareLicense >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # Reporting: freesurfer@nmr.mgh.harvard.edu >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # FreeSurfer SUBJECTS_DIR >>>>>>>>>>>>>>>> # T1 images and FreeSurfer segmentations are expected >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>> found >>>>>>>>>>>>>>>> here >>>>>>>>>>>>>>>> # setenv SUBJECTS_DIR /path/to/recons/of/ducks >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Output directory where trac-all results will be >>>>>>>>>>>>>>>> saved >>>>>>>>>>>>>>>> # Default: Same as SUBJECTS_DIR >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set dtroot = $pre_data/tracula >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Subject IDs >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set subjlist = (00075 00104 00122 00200 00308 00369 >>>>>>>>>>>>>>>> 00387 >>>>>>>>>>>>>>>> 00400 >>>>>>>>>>>>>>>> 00422 >>>>>>>>>>>>>>>> 00452 00518 00568 00587 00624 00636 00686 00698 00727 >>>>>>>>>>>>>>>> 00909 >>>>>>>>>>>>>>>> 00926 >>>>>>>>>>>>>>>> 00933 00943 00983 00992 01049 01121 01329 01450 01509 >>>>>>>>>>>>>>>> 01531 >>>>>>>>>>>>>>>> 01678 >>>>>>>>>>>>>>>> 01735 01746 01809 01843 01917 10039 10056 10089 10165 >>>>>>>>>>>>>>>> 10171 >>>>>>>>>>>>>>>> 10227 >>>>>>>>>>>>>>>> 10238 10263 10314 10320 10326 10349 10407 10431 10435 >>>>>>>>>>>>>>>> 10458 >>>>>>>>>>>>>>>> 10477 >>>>>>>>>>>>>>>> 10499 10500 10636 10750 11209 12210 12357 12472 12645 >>>>>>>>>>>>>>>> 13493 >>>>>>>>>>>>>>>> 13958 >>>>>>>>>>>>>>>> 14302 14481 14530 15329 15345 15864 16654 17267 17478 >>>>>>>>>>>>>>>> 18337 >>>>>>>>>>>>>>>> 18422 >>>>>>>>>>>>>>>> 18530 19259 19377 19725 20071 20383 21413 23846 24115 >>>>>>>>>>>>>>>> 24531 >>>>>>>>>>>>>>>> 24781 >>>>>>>>>>>>>>>> 25962 26314 26475 28822 30510 30571 30927 31034 31049 >>>>>>>>>>>>>>>> 31237 >>>>>>>>>>>>>>>> 31437 >>>>>>>>>>>>>>>> 31471 31531 32131 32162 32222) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # In case you want to analyze only Huey and Louie >>>>>>>>>>>>>>>> # Default: Run analysis on all subjects >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set runlist = (1 2 3 4 5 >>>>>>>>>>>>>>>> 6 >>>>>>>>>>>>>>>> 7 >>>>>>>>>>>>>>>> 8 9 10 11 12 13 14 >>>>>>>>>>>>>>>> 15 >>>>>>>>>>>>>>>> 16 >>>>>>>>>>>>>>>> 17 18 19 20 21 22 23 >>>>>>>>>>>>>>>> 24 >>>>>>>>>>>>>>>> 25 >>>>>>>>>>>>>>>> 26 27 28 29 30 31 32 >>>>>>>>>>>>>>>> 33 >>>>>>>>>>>>>>>> 34 >>>>>>>>>>>>>>>> 35 36 37 38 39 40 41 >>>>>>>>>>>>>>>> 42 >>>>>>>>>>>>>>>> 43 >>>>>>>>>>>>>>>> 44 45 46 47 48 49 50 >>>>>>>>>>>>>>>> 51 >>>>>>>>>>>>>>>> 52 >>>>>>>>>>>>>>>> 53 54 55 56 57 58 59 >>>>>>>>>>>>>>>> 60 >>>>>>>>>>>>>>>> 61 62 63 64 65 66 67 >>>>>>>>>>>>>>>> 68 >>>>>>>>>>>>>>>> 69 >>>>>>>>>>>>>>>> 70 71 72 73 74 75 76 >>>>>>>>>>>>>>>> 77 >>>>>>>>>>>>>>>> 78 >>>>>>>>>>>>>>>> 79 80 81 82 83 84 85 >>>>>>>>>>>>>>>> 86 >>>>>>>>>>>>>>>> 87 >>>>>>>>>>>>>>>> 88 89 90 91 92 93 94 >>>>>>>>>>>>>>>> 95 >>>>>>>>>>>>>>>> 96 >>>>>>>>>>>>>>>> 97 98 99 100 101 102) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Input diffusion DICOMs (file names relative to >>>>>>>>>>>>>>>> dcmroot) >>>>>>>>>>>>>>>> # If original DICOMs don't exist these can be in other >>>>>>>>>>>>>>>> image >>>>>>>>>>>>>>>> format >>>>>>>>>>>>>>>> # but then bvecfile bvalfile and nb0 must be specified >>>>>>>>>>>>>>>> (see >>>>>>>>>>>>>>>> below) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> set dcmroot = $pre_data/dti_dicoms >>>>>>>>>>>>>>>> set dcmlist = (00075/data_1.dcm \ >>>>>>>>>>>>>>>> 00104/data_1.dcm \ >>>>>>>>>>>>>>>> 00122/data_1.dcm \ >>>>>>>>>>>>>>>> 00200/data_1.dcm \ >>>>>>>>>>>>>>>> 00308/data_1.dcm \ >>>>>>>>>>>>>>>> 00369/data_1.dcm \ >>>>>>>>>>>>>>>> 00387/data_1.dcm \ >>>>>>>>>>>>>>>> 00400/data_1.dcm \ >>>>>>>>>>>>>>>> 00422/data_1.dcm \ >>>>>>>>>>>>>>>> 00452/data_1.dcm \ >>>>>>>>>>>>>>>> 00518/data_1.dcm \ >>>>>>>>>>>>>>>> 00568/data_1.dcm \ >>>>>>>>>>>>>>>> 00587/data_1.dcm \ >>>>>>>>>>>>>>>> 00624/data_1.dcm \ >>>>>>>>>>>>>>>> 00636/data_1.dcm \ >>>>>>>>>>>>>>>> 00686/data_1.dcm \ >>>>>>>>>>>>>>>> 00698/data_1.dcm \ >>>>>>>>>>>>>>>> 00727/data_1.dcm \ >>>>>>>>>>>>>>>> 00909/data_1.dcm \ >>>>>>>>>>>>>>>> 00926/data_1.dcm \ >>>>>>>>>>>>>>>> 00933/data_1.dcm \ >>>>>>>>>>>>>>>> 00943/data_1.dcm \ >>>>>>>>>>>>>>>> 00983/data_1.dcm \ >>>>>>>>>>>>>>>> 00992/data_1.dcm \ >>>>>>>>>>>>>>>> 01049/data_1.dcm \ >>>>>>>>>>>>>>>> 01121/data_1.dcm \ >>>>>>>>>>>>>>>> 01329/data_1.dcm \ >>>>>>>>>>>>>>>> 01450/data_1.dcm \ >>>>>>>>>>>>>>>> 01509/data_1.dcm \ >>>>>>>>>>>>>>>> 01531/data_1.dcm \ >>>>>>>>>>>>>>>> 01678/data_1.dcm \ >>>>>>>>>>>>>>>> 01735/data_1.dcm \ >>>>>>>>>>>>>>>> 01746/data_1.dcm \ >>>>>>>>>>>>>>>> 01809/data_1.dcm \ >>>>>>>>>>>>>>>> 01843/data_1.dcm \ >>>>>>>>>>>>>>>> 01917/data_1.dcm \ >>>>>>>>>>>>>>>> 10039/data_1.dcm \ >>>>>>>>>>>>>>>> 10056/data_1.dcm \ >>>>>>>>>>>>>>>> 10089/data_1.dcm \ >>>>>>>>>>>>>>>> 10165/data_1.dcm \ >>>>>>>>>>>>>>>> 10171/data_1.dcm \ >>>>>>>>>>>>>>>> 10227/data_1.dcm \ >>>>>>>>>>>>>>>> 10238/data_1.dcm \ >>>>>>>>>>>>>>>> 10263/data_1.dcm \ >>>>>>>>>>>>>>>> 10314/data_1.dcm \ >>>>>>>>>>>>>>>> 10320/data_1.dcm \ >>>>>>>>>>>>>>>> 10326/data_1.dcm \ >>>>>>>>>>>>>>>> 10349/data_1.dcm \ >>>>>>>>>>>>>>>> 10407/data_1.dcm \ >>>>>>>>>>>>>>>> 10431/data_1.dcm \ >>>>>>>>>>>>>>>> 10435/data_1.dcm \ >>>>>>>>>>>>>>>> 10458/data_1.dcm \ >>>>>>>>>>>>>>>> 10477/data_1.dcm \ >>>>>>>>>>>>>>>> 10499/data_1.dcm \ >>>>>>>>>>>>>>>> 10500/data_1.dcm \ >>>>>>>>>>>>>>>> 10636/data_1.dcm \ >>>>>>>>>>>>>>>> 10750/data_1.dcm \ >>>>>>>>>>>>>>>> 11209/data_1.dcm \ >>>>>>>>>>>>>>>> 12210/data_1.dcm \ >>>>>>>>>>>>>>>> 12357/data_1.dcm \ >>>>>>>>>>>>>>>> 12472/data_1.dcm \ >>>>>>>>>>>>>>>> 12645/data_1.dcm \ >>>>>>>>>>>>>>>> 13493/data_1.dcm \ >>>>>>>>>>>>>>>> 13958/data_1.dcm \ >>>>>>>>>>>>>>>> 14302/data_1.dcm \ >>>>>>>>>>>>>>>> 14481/data_1.dcm \ >>>>>>>>>>>>>>>> 14530/data_1.dcm \ >>>>>>>>>>>>>>>> 15329/data_1.dcm \ >>>>>>>>>>>>>>>> 15345/data_1.dcm \ >>>>>>>>>>>>>>>> 15864/data_1.dcm \ >>>>>>>>>>>>>>>> 16654/data_1.dcm \ >>>>>>>>>>>>>>>> 17267/data_1.dcm \ >>>>>>>>>>>>>>>> 17478/data_1.dcm \ >>>>>>>>>>>>>>>> 18337/data_1.dcm \ >>>>>>>>>>>>>>>> 18422/data_1.dcm \ >>>>>>>>>>>>>>>> 18530/data_1.dcm \ >>>>>>>>>>>>>>>> 19259/data_1.dcm \ >>>>>>>>>>>>>>>> 19377/data_1.dcm \ >>>>>>>>>>>>>>>> 19725/data_1.dcm \ >>>>>>>>>>>>>>>> 20071/data_1.dcm \ >>>>>>>>>>>>>>>> 20383/data_1.dcm \ >>>>>>>>>>>>>>>> 21413/data_1.dcm \ >>>>>>>>>>>>>>>> 23846/data_1.dcm \ >>>>>>>>>>>>>>>> 24115/data_1.dcm \ >>>>>>>>>>>>>>>> 24531/data_1.dcm \ >>>>>>>>>>>>>>>> 24781/data_1.dcm \ >>>>>>>>>>>>>>>> 25962/data_1.dcm \ >>>>>>>>>>>>>>>> 26314/data_1.dcm \ >>>>>>>>>>>>>>>> 26475/data_1.dcm \ >>>>>>>>>>>>>>>> 28822/data_1.dcm \ >>>>>>>>>>>>>>>> 30510/data_1.dcm \ >>>>>>>>>>>>>>>> 30571/data_1.dcm \ >>>>>>>>>>>>>>>> 30927/data_1.dcm \ >>>>>>>>>>>>>>>> 31034/data_1.dcm \ >>>>>>>>>>>>>>>> 31049/data_1.dcm \ >>>>>>>>>>>>>>>> 31237/data_1.dcm \ >>>>>>>>>>>>>>>> 31437/data_1.dcm \ >>>>>>>>>>>>>>>> 31471/data_1.dcm \ >>>>>>>>>>>>>>>> 31531/data_1.dcm \ >>>>>>>>>>>>>>>> 32131/data_1.dcm \ >>>>>>>>>>>>>>>> 32162/data_1.dcm \ >>>>>>>>>>>>>>>> 32222/data_1.dcm) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Diffusion gradient table >>>>>>>>>>>>>>>> # Must be specified if inputs are not MGH DICOMs >>>>>>>>>>>>>>>> # Three-column format one row for each volume in the >>>>>>>>>>>>>>>> diffusion >>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>> set >>>>>>>>>>>>>>>> # Default: Read from DICOM header >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> #set bvecfile = $pre_data/DTI_Analysis/00075/bvecs.txt >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Diffusion b-value table >>>>>>>>>>>>>>>> # Must be specified if inputs are not MGH DICOMs >>>>>>>>>>>>>>>> # Single-column format one value for each volume in >>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>> diffusion >>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>> set >>>>>>>>>>>>>>>> # Default: Read from DICOM header >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> #set bvalfile = $pre_data/DTI_Analysis/00075/bvals.txt >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Number of low-b images >>>>>>>>>>>>>>>> # Must be specified if inputs are not DICOM >>>>>>>>>>>>>>>> # Default: Read from DICOM header >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set nb0 = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Perform registration-based B0-inhomogeneity >>>>>>>>>>>>>>>> compensation? >>>>>>>>>>>>>>>> # Default: 0 (no) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set dob0 = 0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Input B0 field map magnitude DICOMs (file names >>>>>>>>>>>>>>>> relative >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> dcmroot) >>>>>>>>>>>>>>>> # Only used if dob0 = 1 >>>>>>>>>>>>>>>> # Default: None >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> #set b0mlist = (huey/fmag/XXX-1.dcm >>>>>>>>>>>>>>>> dewey/fmag/XXX-1.dcm >>>>>>>>>>>>>>>> louie/fmag/XXX-1.dcm) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Input B0 field map phase DICOMs (file names relative >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> dcmroot) >>>>>>>>>>>>>>>> # Only used if dob0 = 1 >>>>>>>>>>>>>>>> # Default: None >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> #set b0plist = (huey/fphas/XXX-1.dcm >>>>>>>>>>>>>>>> dewey/fphas/XXX-1.dcm >>>>>>>>>>>>>>>> louie/fphas/XXX-1.dcm) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Echo spacing for field mapping sequence (from >>>>>>>>>>>>>>>> sequence >>>>>>>>>>>>>>>> printout) >>>>>>>>>>>>>>>> # Only used if dob0 = 1 >>>>>>>>>>>>>>>> # Default: None >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> #set echospacing = 0.7 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Perform registration-based eddy-current >>>>>>>>>>>>>>>> compensation? >>>>>>>>>>>>>>>> # Default: 1 (yes) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set doeddy = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Rotate diffusion gradient vectors to match >>>>>>>>>>>>>>>> eddy-current >>>>>>>>>>>>>>>> compensation? >>>>>>>>>>>>>>>> # Only used if doeddy = 1 >>>>>>>>>>>>>>>> # Default: 1 (yes) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set dorotbvecs = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Fractional intensity threshold for BET mask >>>>>>>>>>>>>>>> extraction >>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>> low-b >>>>>>>>>>>>>>>> images >>>>>>>>>>>>>>>> # This mask is used only if usemaskanat = 0 >>>>>>>>>>>>>>>> # Default: 0.3 >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set thrbet = 0.5 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Perform diffusion-to-T1 registration by flirt? >>>>>>>>>>>>>>>> # Default: 1 (yes) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set doregflt = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Perform diffusion-to-T1 registration by bbregister? >>>>>>>>>>>>>>>> # Default: 0 (no) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set doregbbr = 0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # MNI template (the only option for inter-subject >>>>>>>>>>>>>>>> registration >>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>> version) >>>>>>>>>>>>>>>> # Default: >>>>>>>>>>>>>>>> $FSLDIR/data/standard/MNI152_T1_1mm_brain.nii.gz >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set mnitemp = >>>>>>>>>>>>>>>> $FSLDIR/data/standard/MNI152_T1_1mm_brain.nii.gz >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Use brain mask extracted from T1 image instead of >>>>>>>>>>>>>>>> low-b >>>>>>>>>>>>>>>> diffusion >>>>>>>>>>>>>>>> image? >>>>>>>>>>>>>>>> # Has no effect if there is no T1 data >>>>>>>>>>>>>>>> # Default: 1 (yes) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set usemaskanat = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Paths to reconstruct >>>>>>>>>>>>>>>> # Default: All paths in the atlas >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set pathlist = ( lh.cst_AS rh.cst_AS \ >>>>>>>>>>>>>>>> lh.unc_AS rh.unc_AS \ >>>>>>>>>>>>>>>> lh.ilf_AS rh.ilf_AS \ >>>>>>>>>>>>>>>> fmajor_PP fminor_PP \ >>>>>>>>>>>>>>>> lh.atr_PP rh.atr_PP \ >>>>>>>>>>>>>>>> lh.ccg_PP rh.ccg_PP \ >>>>>>>>>>>>>>>> lh.cab_PP rh.cab_PP \ >>>>>>>>>>>>>>>> lh.slfp_PP rh.slfp_PP \ >>>>>>>>>>>>>>>> lh.slft_PP rh.slft_PP ) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Number of path control points >>>>>>>>>>>>>>>> # Default: 5 >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set ncpts = 5 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # List of training subjects >>>>>>>>>>>>>>>> # This text file lists the locations of training >>>>>>>>>>>>>>>> subject >>>>>>>>>>>>>>>> directories >>>>>>>>>>>>>>>> # Default: $FREESURFER_HOME/trctrain/trainlist.txt >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set trainfile = >>>>>>>>>>>>>>>> $FREESURFER_HOME/trctrain/trainlist.txt >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Use long (more descriptive) directory hierarchy for >>>>>>>>>>>>>>>> saving >>>>>>>>>>>>>>>> path >>>>>>>>>>>>>>>> distributions? >>>>>>>>>>>>>>>> # By default paths distributions are saved directly >>>>>>>>>>>>>>>> under >>>>>>>>>>>>>>>> $subjectname/dpath >>>>>>>>>>>>>>>> # Default: 0 (no) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set dopathsubdirs = 0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Number of MCMC burn-in iterations >>>>>>>>>>>>>>>> # (Path samples drawn initially by MCMC algorithm and >>>>>>>>>>>>>>>> discarded) >>>>>>>>>>>>>>>> # Default: 200 >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set nburnin = 200 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Number of MCMC iterations >>>>>>>>>>>>>>>> # (Path samples drawn by MCMC algorithm and used to >>>>>>>>>>>>>>>> estimate >>>>>>>>>>>>>>>> path >>>>>>>>>>>>>>>> distribution) >>>>>>>>>>>>>>>> # Default: 5000 >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set nsample = 5000 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> # Frequency with which MCMC path samples are retained >>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>> path >>>>>>>>>>>>>>>> distribution >>>>>>>>>>>>>>>> # Default: 5 (keep every 5th sample) >>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>> set nkeep = 5 >>>>>>>>>>>>>>>> ============================================== >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>> Freesurfer mailing list >>>>>>>>>>>>>>>> Freesurfer@nmr.mgh.harvard.edu >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The information in this e-mail is intended only for the >>>>>>>>>>>>>>> person >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> whom >>>>>>>>>>>>>>> it >>>>>>>>>>>>>>> is >>>>>>>>>>>>>>> addressed. If you believe this e-mail was sent to you >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> error >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> e-mail >>>>>>>>>>>>>>> contains patient information, please contact the >>>>>>>>>>>>>>> Partners >>>>>>>>>>>>>>> Compliance >>>>>>>>>>>>>>> HelpLine at >>>>>>>>>>>>>>> http://www.partners.org/complianceline . If the e-mail >>>>>>>>>>>>>>> was >>>>>>>>>>>>>>> sent >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> you >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> error >>>>>>>>>>>>>>> but does not contain patient information, please >>>>>>>>>>>>>>> contact >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> sender >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> properly >>>>>>>>>>>>>>> dispose of the e-mail. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >> >