Freesurfer September 2017

freesurfer@nmr.mgh.harvard.edu

109 participants
199 discussions

recon-all error: ERROR! FOV=272.000 > 256
by juhyoung Ryu 03 Sep '17

03 Sep '17

Hi experts, I'm trying to surface reconstruction using high-resolution T1 and T2 data using freesurfer version 6 So I typed like this: recon-all -subject ${subjName} -i T1_bfc.nii -hires -T2 T2_bfc.nii -T2pial -all and that excited with errors like this; \n**************************************** ERROR! FOV=272.000 > 256 Include the flag -cw256 with recon-all! Inspect orig.mgz to ensure the head is fully visible. ****************************************\n So I added -cw256 flag and run the command line again (recon-all -subject ${subjName} -i T1_bfc.nii -hires -T2 T2_bfc.nii -T2pial -all -cw256). But the result is same. I'd appreciate any suggestion. Thank you, Juhyoung

4 12

Run stats for both hemisphere?
by Xianwei Che 03 Sep '17

03 Sep '17

Dear freesurfer experts, I am wring to ask a stupid question, which I did not find the answer in the mailing list. I am going to run stats on the thickness data as described in the tutorial, do I have to run separately for each hemisphere? If I am not wrong, we have to specify the hemi in the data assembling stage. Are we able to run once for both hemis in the glm and correction stage? If not, I am a little confused in the correction stage, which we specify the --2spaces in the simulation. As indicated in the tutorial, this is for adjusting p for both hemis. Another question is about subcortical areas. Do we have to run stats for the cortical and subcortical areas separately? Thanks *-------------* Mr Xianwei Che PhD Candidate Monash Alfred Psychiatry Research Centre (MAPrc) Central Clinical School & the Alfred Monash University Level 4, 607 St Kilda Road, Melbourne 3004, Australia

2 2

Freesurfer tutorial
by Esteban, Eva(GE Healthcare) 03 Sep '17

03 Sep '17

Good afternoon, I am new to Freesurfer and following the instructions to find out the Cortical Thickness of a Volume-defined ROI(http://surfer.nmr.mgh.harvard.edu/fswiki/VolumeRoiCorticalThickness), everything goes well until step 4. Even if I try to use -reshape-factor 7 as suggested, it reshapes it to 6 and so the next step gives an error because the segmentation is shaped to 7. Would anyone mind giving me some guidance on how to do it? Many thanks, Eva

3 5

Continuous co-variate by continuous co-variate interaction effects
by Timothy Hendrickson 03 Sep '17

03 Sep '17

Freesurfer experts, I have created a design matrix in order to test for whether there is an interaction effect between two continuous co-variates controlling for a categorical variable. So I have one categorical variable with two levels, and two continuous co-variates. My design matrix is as follows: 0 0 1 1 0 0 0 0 0 0 1 1 Is this correct? -Tim Timothy Hendrickson Department of Psychiatry University of Minnesota Bioinformatics and Computational Biology M.S. Candidate Office: 612-624-6441 Mobile: 507-259-3434 (texts okay)

3 3

-refeventdur in mkanalysis-sess?
by Tori Williams 03 Sep '17

03 Sep '17

Hi FreeSurfer Team, I was wondering if you could provide a bit more clarification on what the "-refeventdur" flag is referring to in the mkanalysis-sess command? The description in the help screen states it should be the "duration (sec) of reference event for scaling." I am unsure what the "reference event" is. I couldn't find any additional info on the listserv, and the two examples I saw from tutorials used a value of "4" and another used a value of "16". Any clarification is greatly appreciated! Because the help for the flag is listed under the "Assume a shape" header, does it have something to do with the HRF? Thanks so much! Tori -- Victoria J. Williams, PhD Clinical Research Fellow Interdisciplinary Brain Center Massachusetts General Hospital Harvard Medical School Department of Neurology 149 13th Street Charlestown, MA 02129

2 1

Freesurfer with infarct patients
by Budge, Mariana 03 Sep '17

03 Sep '17

Hi Freesurfer experts, I am running FS on a patient with a chronic right occipital lobe infarct as part of a larger study. The program does not recognize the area around the lesion as brain matter, and I am wondering how best to treat this situation. I am worried that adding Control Points will incorrectly label the region as white matter. I am attaching some pictures of slices where this is apparent. Thank you so much for your help! Best, Mariana

3 10

Error with TRACULA using dcm and nii
by Ferrier, Christopher Q. 01 Sep '17

01 Sep '17

Hello. We are trying to use TRACULA to analyze the structural connectivity of PD patients scanned on a 3 tesla Philips Ingenia. We have run the tutorial data without any problems but encounter errors when using our own data. We ran recon-all on all of our subjects without any problem and follow the exact steps that worked for the tutorial data but encounter different errors when using the dcm or nii version of the DTI scans. Our nii files go from scanner to CD to Osirix to DICOM to dcm2nii which gives us the nii files and the bvals and bvecs. Here is the error for the nii DTI scans (included bvals and gradients in the config file for the nii files). [Christinas-iMac:Freesurfer_temp/PD800/diffusion_recons] christina% trac-all -prep -c/Volumes/CFERRIER/Freesurfer_temp/PD800/dmrirc.tutorial ERROR: flag -c/Volumes/CFERRIER/Freesurfer_temp/PD800/dmrirc.tutorial unrecognized -prep -c/Volumes/CFERRIER/Freesurfer_temp/PD800/dmrirc.tutorial [Christinas-iMac:Freesurfer_temp/PD800/diffusion_recons] christina% trac-all -prep -c /Volumes/CFERRIER/Freesurfer_temp/PD800/dmrirc.tutorial INFO: SUBJECTS_DIR is /Volumes/CFERRIER/Freesurfer_temp/PD800/diffusion_recons INFO: Diffusion root is /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT Actual FREESURFER_HOME /Applications/Freesurfer trac-preproc -c /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/dmrirc.local -log /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/trac-all.log -cmd /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/trac-all.cmd #------------------------------------- /Applications/Freesurfer/bin/trac-preproc #------------------------------------- #@# Image corrections Thu Aug 31 14:45:46 CDT 2017 mri_convert --bvec-voxel /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI_combined.nii /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz mri_convert.bin --bvec-voxel /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI_combined.nii /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI_combined.nii... TR=0.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0.999339, -0.0363145, -0.00163044) j_ras = (-0.0363101, 0.99508, 0.0921851) k_ras = (0.00172524, -0.0921834, 0.995741) writing to /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz... cp /Volumes/CFERRIER/Freesurfer_temp/PD800/bvecs/PD800_bvecs.txt /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvecs cp /Volumes/CFERRIER/Freesurfer_temp/PD800/bvals/PD800_bvals.txt /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvals mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs.tmp /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvecs mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvals.tmp /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvals orientLAS /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz INFO: input image orientation is LAS INFO: input image determinant is -9.1875 mri_convert -oni 128 -onj 128 -onk 50 -oid -0.999339 -0.0363145 -0.00163044 -ojd -0.0363101 0.99508 0.0921851 -okd 0.00172524 -0.0921834 0.995741 -oc 7.38609 19.7949 1.17333 -rt nearest /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz mri_convert.bin -oni 128 -onj 128 -onk 50 -oid -0.999339 -0.0363145 -0.00163044 -ojd -0.0363101 0.99508 0.0921851 -okd 0.00172524 -0.0921834 0.995741 -oc 7.38609 19.7949 1.17333 -rt nearest /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz normalizing out_i_direction: (-0.999339, -0.0363145, -0.00163044) -> (-0.999339, -0.0363145, -0.00163044) normalizing out_j_direction: (-0.0363101, 0.99508, 0.0921851) -> (-0.0363101, 0.99508, 0.0921851) normalizing out_k_direction: (0.00172524, -0.0921834, 0.995741) -> (0.00172524, -0.0921834, 0.995741) $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz... TR=0.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0.999339, -0.0363145, -0.00163044) j_ras = (-0.0363101, 0.99508, 0.0921851) k_ras = (0.00172524, -0.0921834, 0.995741) Reslicing using nearest writing to /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz... INFO: found /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvals, copying INFO: found /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvecs, converting to LAS mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.bvecs /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.bvals /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvals eddy_correct /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.nii.gz 0 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0000 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0001 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0002 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0003 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0004 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0005 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0006 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0007 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0008 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0009 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0010 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0011 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0012 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0013 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0014 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0015 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0016 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0017 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0018 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0019 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0020 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0021 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0022 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0023 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0024 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0025 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0026 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0027 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0028 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0029 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0030 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0031 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0032 processing /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_tmp0033 mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs.norot xfmrot /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.ecclog /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs.norot /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs R: Subscript out of range. R: Subscript out of range. R: Subscript out of range. ln -sf /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/data.nii.gz mri_convert --frame 34 /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/lowb.nii.gz mri_convert.bin --frame 34 /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/lowb.nii.gz $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi.nii.gz... TR=1000.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0.999339, -0.0363145, -0.00163044) j_ras = (-0.0363101, 0.99508, 0.0921851) k_ras = (0.00172524, -0.0921834, 0.995741) keeping frame 34 ERROR: valid frame numbers are between 0 and 33 Darwin Christinas-iMac.local 14.5.0 Darwin Kernel Version 14.5.0: Thu Apr 21 20:40:54 PDT 2016; root:xnu-2782.50.3~1/RELEASE_X86_64 x86_64 trac-preproc exited with ERRORS at Thu Aug 31 14:54:59 CDT 2017 Here is the error I encounter when running the original dicom files through tracula [Christinas-iMac:Freesurfer_temp/PD800/diffusion_recons] christina% trac-all -prep -c /Volumes/CFERRIER/Freesurfer_temp/PD800/dmrirc.tutorial INFO: SUBJECTS_DIR is /Volumes/CFERRIER/Freesurfer_temp/PD800/diffusion_recons INFO: Diffusion root is /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT Actual FREESURFER_HOME /Applications/Freesurfer trac-preproc -c /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/dmrirc.local -log /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/trac-all.log -cmd /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/scripts/trac-all.cmd #------------------------------------- /Applications/Freesurfer/bin/trac-preproc #------------------------------------- #@# Image corrections Thu Aug 31 15:31:12 CDT 2017 mri_convert --bvec-voxel /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz mri_convert.bin --bvec-voxel /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz $Id: mri_convert.c,v 1.226 2016/02/26 16:15:24 mreuter Exp $ reading from /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm... Starting DICOMRead2() dcmfile = /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm dcmdir = /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips -- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm break DICOMRead.c:5228 Ref Series No = 601 Found 5 files, checking for dicoms WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips -- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm break DICOMRead.c:5228 WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD806_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips Healthcare-- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD806_DTI.dcm break DICOMRead.c:5228 WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD809_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips Healthcare-- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD809_DTI.dcm break DICOMRead.c:5228 Found 1 dicom files in series. WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips -- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm break DICOMRead.c:5228 WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD806_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips Healthcare-- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD806_DTI.dcm break DICOMRead.c:5228 WARNING: tag image orientation not found in /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD809_DTI.dcm ERROR: don't know how to get DWI parameters from --Philips Healthcare-- ERROR: GetDICOMInfo(): dcmGetDWIParams() 1 DICOM File: /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD809_DTI.dcm break DICOMRead.c:5228 First Sorting Computing Slice Direction WARNING: it appears that the image position for all slices is the same. This is a problem with the DICOM file. Using direction cosines from col and row to compute slice direction, but the output may be misoriented. Vs: 0 0 0 Vs: nan nan nan Second Sorting IsDWI = 0, IsPhilipsDWI = 0 Counting frames nframes = 1 nslices = 1 ndcmfiles = 1 PE Dir = UNKNOWN (dicom read) Loading pixel data TR=0.00, TE=0.00, TI=0.00, flip angle=0.00 i_ras = (-0, -0, 0) j_ras = (-0, -0, 0) k_ras = (nan, nan, nan) writing to /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz... mri_probedicom --i /Volumes/CFERRIER/Freesurfer_temp/PD800/orig_nii/PD800_DTI.dcm > /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dcminfo.dat cp /Volumes/CFERRIER/Freesurfer_temp/PD800/bvecs/PD800_bvecs.txt /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvecs cp /Volumes/CFERRIER/Freesurfer_temp/PD800/bvals/PD800_bvals.txt /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvals mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvecs.tmp /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvecs mv -f /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/bvals.tmp /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.bvals orientLAS /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig.nii.gz /Volumes/CFERRIER/Freesurfer_temp/PD800/TRAC_OUTPUT/PD800/dmri/dwi_orig_las.nii.gz mat = NULL! MatrixFree: NULL mat POINTER! mat = NULL! MatrixFree: NULL mat POINTER! mat = NULL! MatrixFree: NULL mat POINTER! INFO: input image orientation is III INFO: input image determinant is nan order: Subscript out of range. Darwin Christinas-iMac.local 14.5.0 Darwin Kernel Version 14.5.0: Thu Apr 21 20:40:54 PDT 2016; root:xnu-2782.50.3~1/RELEASE_X86_64 x86_64 trac-preproc exited with ERRORS at Thu Aug 31 15:32:20 CDT 2017 Thanks for your help. We tried to go through everything but nothing seems to be working.

1 0

QC cortical thickness measurements
by John Anderson 01 Sep '17

01 Sep '17

Dear FS experts, my apologizes if my question is a simple one. I am new to Freesurfer and I appreciate if you help me. After running recon-all on a T1 image I reached the final step and the analysis ran smoothly without any issues.. Now what I need to check in the output images to be sure that the cortical thickness measurements are correct and ready for cortical thickness group analysis like the one explained int this page https://surfer.nmr.mgh.harvard.edu/fswiki/FsTutorial/GroupAnalysis? If you can share any guide or a workflow sheet that can be followed to check the recons and the cortical thickness measurements systematically it will be highly appreciated! Thanks in advance for any help!! John

1 0

Open Letter to NIH Director Francis Collins
by Thomas Yeo 31 Aug '17

31 Aug '17

Dear Everyone, Please note the following NIH petition regarding the impending classification of basic science research as clinical trials: https://ipetitions.com/petition/open-letter-nih-collins Regards, Thomas

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Freesurfer September 2017