Doug-
Any further thoughts on this?
On 10/05/2016 04:47 PM, Joel Bruss wrote:
Doug-
I'm sooo close but something isn't right. I've run:
1)mri_vol2sur to sampel the ROI in subA surface space
mri_cor2label to convert it to a label
mri_label2lable to push it to subB
mri_label2vol to get back to a a volume
Steps 1-3 look great. The output of step 4, loaded on subB inflated surface looks cut off. I suspect this is because it's actually down in volume space now? If I load the ROI over the wmparc file for subB, it fits, it's just that I only have a strip of voxels on the WM surface only. I chose the wmparc.mgz file for subB for both "--temp" and ''--regheader." The result is the same if specify "--surf pial" or choose nothing, it's also the same if I chose orig.mgz or brainmask.mgz for the temp/header options. How do I get the ROI to "fill in" like it is in subA, originally?
I've attached a composite of the steps I've run. I really hate to keep pestering the listserv with this. My apologies.
-Joel
On 10/04/2016 03:03 PM, Douglas N Greve wrote:
mri_label2vol will transfer it into the volume, no need for surf2vol
On 10/04/2016 03:54 PM, Joel Bruss wrote:
Doug (Bruce and Trisanna)-
Thank you all for your help. I do, indeed, have a volume, then label, and see now how to load and view this properly. I've gotten through the "label2label" step and now have a label (from subA) in subB space. If I now want to back-project this label to subB's input MRI volume, would I run the following?
(Assuming I invert the steps I did to get the original binary mask to subA's surface, as a label)
mri_label2vol --label $SUBJECTS_DIR/subA/tmpdir/rh.roi_to_subB.label \ --subject subB \ --temp brainmask.mgz \ --regheader brainmask.mgz \ --o $SUBJECTS_DIR/subA/tmpdir/roi_to_subB.mgz \ --surf pial
mri_surf2vol --surfval $SUBJECTS_DIR/subA/tmpdir/roi_to_subB.mgz \ --volregidentity subB --template $SUBJECTS_DIR/subB/mri/orig.mgz --hemi rh \ --o $SUBJECTS_DIR/subA/tmpdir/roi_to_subB_orig.mgz
"label2vol" works but I'm now stuck on the "surf2vol" command. I end up with the following error:
ERROR: dimension inconsistency in source data Number of surface vertices = 128997 Number of value vertices = 16777216
-Joel
On 10/04/2016 02:45 PM, Douglas N Greve wrote:
The rh.roiS.mgh file is a surface overlay (ie, one value per vertex), not a surface itself (which would have a list of vertices, the XYZ for each, and neighborhood relations). When you loaded rh.roiS.mgh as a surface overlay, did you change the threshold to be 0.5? The default is 2, and if your ROI is binary (0,1), then no voxels would ever appear above threshold
On 10/03/2016 03:20 PM, Joel Bruss wrote:
Sorry, it sent before I finished. I'll try this again.
On 09/30/2016 02:00 PM, Douglas N Greve wrote:
First, bring up the ROI on the volume along with the surface in the volume. You can do this with FreeView. Make sure that the ROI intersects the surface.
Yes, this looks fine
Then run mri_vol2surf so sample the binary ROI volume onto the surface.
This is what I ran:
mri_vol2surf --src $SUBJECTS_DIR/subA/tmpdir/roi.mgz \ --out $SUBJECTS_DIR/subA/tmpdir/rh.roiS.mgh \
You can view the ROI on the surface by loading it as an overlay.
This is a volume or a surface now? Is it just a volume resampled to the
surface space? I can't get it to load in freeview as a surface (it just crashes), and it doesn't look like anything as an overlay.
Then run mri_cor2label using the surface-sampled ROI as input and specifying --surf (see the --help) to make this a surface-based label.
I next ran this: mri_cor2label --id 1 --c $SUBJECTS_DIR \ --i $SUBJECTS_DIR/subA/tmpdir/rh.roiS.mgh \ --l $SUBJECTS_DIR/subA/tmpdir/rh.roi.label \ --surf subA rh
You can also view this label in the surface in freeview.
At this point, it just kept loading and loading and loading and I'd finally have to kill the process. I never could visualize this output.
Finally,run mri_label2label using the --regmethod surface
At this point, I must just be feeding bad data into good commands: mri_label2vol --label $SUBJECTS_DIR/subA/tmpdir/rh.roi_to_subB.label \ --subject subB \ --temp brainmask.mgz \ --regheader brainmask.mgz \ --o $SUBJECTS_DIR/subA/tmpdir/roi_to_subB.mgz \ --surf pial
I don't know where things went wrong or how to view the output to diagnose.
Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. ________________________________
Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. ________________________________
Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. ________________________________
Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail.
________________________________ Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. ________________________________